Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0020 STOP-SUBSYSTEM NOT POSSIBLE, SOME HOOKS STILL ACTIVE
Meaning
Some system hooks are still set.
Response
Remove all system hooks and try again.
ASH0050
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0050 INVALID CALL OF A SYSTEM FUNCTION
ASH0051
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
ASH0051 INTERNAL ERROR
ASH0110
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0110 TASK LOCK 'LKASHOOK' NOT GOT
Meaning
The task lock is not created or is held by another task.
Response
Contact the system administrator or reenter the command.
ASH0111
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0111 NO MEMORY AVAILABLE TO PROCESS THE COMMAND
Response
Contact the system administrator.
ASH0112
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0112 SYSTEM HOOK TABLES NOT ASSIGNED
ASH0115
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0115 SPECIFIED MODULE NOT FOUND
ASH0116
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0116 DISPLACEMENT EXCEEDS MODULE BOUNDARY
ASH0117
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0117 MISALIGNED SYSTEM HOOK ADDRESS
Meaning
The hook address must be halfword aligned on /390 HSI.
ASH0118
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0118 RESERVED MODULE SPECIFIED
Meaning
System hooks must not be set within reserved modules.
Response
The system hook might be set via address specification nevertheless.
But there will be a risk for system damage in this case.
ASH0119
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0119 SYSTEM HOOK ADDRESS NOT WITHIN SYSTEM ADDRESS SPACE
ASH0120
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0120 SYSTEM HOOK ADDRESS NOT ALLOCATED
ASH0121
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0121 SYSTEM HOOK '(&00)' NOT FOUND
ASH0122
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0122 ACCESS ERROR FOR SYSTEM HOOK ADDRESS
ASH0123
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0123 UNSUPPORTED INSTRUCTION AT SYSTEM HOOK ADDRESS
Meaning
There must be no branch instruction or SVC at the hook address.
ASH0124
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0124 RESERVED SYSTEM HOOK NAME SPECIFIED
Meaning
The names C'$SYSSHxx' cannot be assigned explicitly by the user.
ASH0125
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0125 LACK OF INTERNAL RESOURCES
Meaning
Too much system hooks have been set.
Response
Remove some system hooks.
ASH0126
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0126 SYSTEM HOOK NAME ALREADY EXISTS
ASH0127
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0127 SYNTAX ERROR IN A SYSTEM HOOK COMMAND
Meaning
Message number of command return code for system hook commands.
ASH0128
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0128 SEMANTICAL ERROR IN A SYSTEM HOOK COMMAND
Meaning
Message number of command return code for system hook commands.
ASH0129
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0129 INVALID CPU NUMBER SPECIFICATION
Meaning
CPU numbers must be within the range 0..31 .
ASH0130
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0130 NO SYSTEM HOOKS FOUND FOR SPECIFIED INPUT
ASH0131
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0131 ERROR IN REMOVING SYSTEM HOOK '(&00)'
ASH0132
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0132 NO OUTPUT FOUND FOR SPECIFIED INPUT
ASH0133
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0133 UNRECOVERABLE ERROR DURING CPU SYNCHRONIZATION
Meaning
A call of $SYNCPU yields an unexpected return code.
ASH0134
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0134 (&00)+(&01)=(&02): (&03)
Meaning
The instruction at the hook address is displayed.
Response
Check if the right address was found.
ASH0135
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0135 ADDRESS OK? REPLY (Y=YES; N=NO)
Meaning
Confirmation is requested for setting the system hook.
Response
Y: the displayed instruction agrees with the expectations.
N: the hook shall not be set.
ASH0136
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0136 COMMAND WITHDRAWN BY USER. NO SYSTEM HOOK SET
ASH0137
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0137 COMMAND NOT POSSIBLE DUE TO SYSTEM-ADMINISTRATOR-RESTRICTION
Meaning
The system parameter 'SYSTHOOK' does not have the required value.
ASH0138
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0138 COMMAND NOT POSSIBLE DUE TO AN EXISTING EXCLUSIVE RIGHT FOR SYSTEM HOOKS
Meaning
Another task has the exclusive right for system hooks.
ASH0139
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0139 EXCLUSIVE RIGHT FOR SYSTEM HOOKS NOT GOT
Meaning
In the moment, another task has the exclusive right for system hooks.
Response
Through specification of the operand FORCE=*YES the exclusive
right can be got nevertheless.
ASH014A
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014A SYSTEM HOOK IN WRONG STATE
Response
Deactivate Hook via DEACTIVATE-SYSTEM-HOOK before.
ASH014B
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014B INVALID POSITION SPECIFICATION
Meaning
The specified position within the action list is invalid.
ASH014C
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014C SYNTAX ERROR IN SYSTEM HOOK PROGRAM LINE '(&00)' OF ACTION '(&01)'
ASH014D
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014D SYSTEM HOOK PROGRAM OF ACTION '(&00)' TOO LARGE
ASH014E
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014E DMS ERROR '(&00)' FOR FILE '(&01)'
ASH014F
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH014F BLOCK SIZE OF FILE '(&00)' IS NOT STD(1)
ASH0140
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0140 EXCLUSIVE RIGHT FOR SYSTEM HOOKS NOT PRESENT
Meaning
The task does not have the exclusive right for system hooks.
ASH0141
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0141 SPECIFIED LOCK NOT HELD
ASH0142
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0142 INVALID TASK SPECIFICATION
Meaning
Besides leading blanks, only the characters (0..9,A..Z) are allowed.
A digit must not succeed a leading blank.
ASH0143
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0143 OUTPUT ABORTED DUE TO REQUESTED LIMITATION
Meaning
The number of output records was limited by the operand RECORDS.
ASH0144
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0144 DIFFERENT SIZE FOR EXISTING LOGGING BUFFER NOT SUPPORTED
ASH0145
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0145 VERIFICATION ERROR IN SYSTEM HOOK PROGRAM LINE '(&00)' OF ACTION '(&01)'
ASH0146
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0146 SYSTEM HOOK PROGRAM OF ACTION '(&00)' EMPTY
ASH0147
Destination: USER-TASK, CONSOLE Routing code: 1 Weight: 99
Warranty : NO
ASH0147 THE EXCLUSIVE RIGHT FOR SYSTEM HOOKS WAS ASSIGNED TO THIS TASK
Meaning
In the moment, this task has the exclusive right for special
system hook commands.
ASH0148
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
ASH0148 '(&00)' SYSTEM HOOKS REMOVED. '(&01)' ARE CURRENTLY IN THE SYSTEM
ASH0149
Destination: USER-TASK, CONSOLE Routing code: 1 Weight: 99
Warranty : NO
ASH0149 SYSTEM HOOK '(&00)' SET