HSV0001

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0001   ERROR DURING SVP FUNCTION DIAGNOSE MSSFCALL OBTAIN SYSTEM INFORMATION

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  0010  OK, information delivered.
  06F0  The SVP function is not executable on this configuration.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0005

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0005   ERROR DURING SVP FUNCTION OBTAIN CHANNEL PATH INFORMATION

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0006

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0006   ERROR DURING SVP FUNCTION VARY CHANNEL PATH ONLINE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0400  Hardware error.
  0401  The CHANNEL PATH is not installed or already "online"
        or switching online is disabled.
  0402  The CHANNEL CONTROLLER is not "online".
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0007

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0007   ERROR DURING SVP FUNCTION CHANNEL PATH OFFLINE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0400  Hardware error.
  0401  The CHANNEL PATH is not installed or switching offline is
        disabled.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0020

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0020   ERROR DURING THE SVP FUNCTION DIAGNOSE WRITE CONSOLE.

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.

HSV0023

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0023   ERROR DURING SVP FUNCTION READ IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0001  The IORSF end was exceeded.
  0300  Command not supported.
  1101  The indicated SVP cannot operate.
  1102  The IORSF number is too large.
  1103  The start sector number exceeded the maximum sector of the
        IORSF file.
  3000  IORSF file access error.
  3500  The buffer busy condition was detected.
  3600  The IO-configuration is not supported or a logical error
        was detected.
  PARE  Parameter error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0024

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0024   ERROR DURING SVP FUNCTION WRITE IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0001  The IORSF end was exceeded.
  0300  Command not supported.
  1101  The indicated SVP cannot operate.
  1102  The IORSF number is too large.
  1103  The start sector number exceeded the maximum sector of the
        IORSF file.
  3000  IORSF file access error.
  3100  Write-open operation for IORSF failed.
  3101  Write-close operation for IORSF failed.
  3200  The IORSF is already in write-open status.
  3300  The IORSF is not in write-open status.
  3400  The IORSF is write-protected.
  3500  The buffer busy condition was detected.
  3600  The IO-configuration is not supported or a logical error
        was detected.
  PARE  Parameter error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0025

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0025   ERROR DURING SVP FUNCTION READ ACTIVE IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0001  The IORSF end was exceeded.
  1103  The start sector number exceeded the maximum sector of the
        IORSF file.
  3000  IORSF file access error.
  PARE  Parameter error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0030

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0030   ERROR DURING THE SVP FUNCTION READ HARDWARE STORAGE AREA

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  0020  OK, information delivered.
  0040  Hardware error.
  4040  Error during open or read of the HSA.
  41F0  The HSA-file is not open.
  50F0  The end of HSA-file was exceeded.
  06F0  The SVP function is not executable on this configuration.
       
  PARE  Parameter error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0034

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0034   ERROR DURING SVP FUNCTION VARY CPU ONLINE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  1101  The CPU belongs to another configuration.
  1102  The CPU was already "online".
  0400  Hardware error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0035

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0035   ERROR DURING SVP FUNCTION CPU OFFLINE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  1101  The CPU belongs to another configuration.
  1102  The CPU was already "offline".
  1103  The CPU is last online CPU.
  0400  Hardware error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0036

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0036   ERROR DURING THE SVP FUNCTION START CPU

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The SIGP instruction was completed with condition code 1.
  CC=2  The SIGP instruction was completed with condition code 2.
  CC=3  The SIGP instruction was completed with condition code 3.

HSV0037

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0037   ERROR DURING THE SVP FUNCTION STOP CPU

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The SIGP instruction was completed with condition code 1.
  CC=2  The SIGP instruction was completed with condition code 2.
  CC=3  The SIGP instruction was completed with condition code 3.

HSV0041

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0041   ERROR DURING THE SVP FUNCTION GET IPL DEVICE LIST

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  GERR  The DIAGNOSE instruction could not be executed because
        of a global error.

HSV0042

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0042   ERROR DURING THE SVP FUNCTION MODIFY IPL DEVICE LIST

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  GERR  The DIAGNOSE instruction could not be executed because
        of a global error.

HSV0048

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0048   ERROR DURING SVP FUNCTION GET NUMBER OF CPUS

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0400  Hardware error.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0049

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0049   ERROR DURING SVP FUNCTION NOTIFY CPU OFFLINE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0400  Hardware error.
  0401  Wrong CPU.
  BUSY  The DIAGNOSE instruction was completed with condition code 2
        or the SVP driver is busy.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0050

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0050   ERROR DURING THE SVP FUNCTION DIAGNOSE SDAP READ IO-UNIT FROM IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0301  The caller has no authorization for this function.
  1104  The specified unit type is unknown.
  1105  The specified I/O unit does not exist in IORSF.
  BUSY  The DIAGNOSE instruction was completed with condition code 1
        or 2.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0051

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0051   ERROR DURING THE SVP FUNCTION DIAGNOSE SDAP ADD IO-UNIT TO IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0301  The caller has no authorization for this function.
  0421  Insufficient hardware space to store control information.
  1103  No empty area to store specified I/O unit.
  1104  The specified unit type is unknown.
  1105  The specified I/O unit does not exist or already exist.
  1106  Effective byte length is wrong.
  1107  No unit to which specified i/0 unit can be connected.
  1108  Condition for replacing or adding an I/O unit is not met.
  1109  Replacement code or unit type not supported by hardware.
  BUSY  The DIAGNOSE instruction was completed with condition code 1
        or 2.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0052

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0052   ERROR DURING THE SVP FUNCTION DIAGNOSE SDAP DELETE IO-UNIT FROM IORSF

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  FFxx  Hardware error.
  0300  Command not supported.
  0301  The caller has no authorization for this function.
  0421  Insufficient hardware space to store control information.
  1103  No empty area to store specified I/O unit.
  1104  The specified unit type is unknown.
  1105  The specified I/O unit does not exist.
  1106  Effective byte length is wrong.
  1107  A lower-level unit is connected to specified I/O unit.
  1108  Condition for replacing or deleting an I/O unit is not met.
  1109  Replacement code or unit type not supported by hardware.
  BUSY  The DIAGNOSE instruction was completed with condition code 1
        or 2.
  NSUP  The DIAGNOSE instruction was completed with condition code 3.
  TOUT  The DIAGNOSE instruction was not terminated with a service
        signal interrupt during the waiting time.

HSV0062

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0062   ERROR DURING THE SVP FUNCTION DIAGNOSE RSC DR-CONTROL

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The DIAGNOSE instruction was completed with condition code 1.
  CC=2  The DIAGNOSE instruction was completed with condition code 2.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0063

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0063   ERROR DURING THE SVP FUNCTION DIAGNOSE RSC DR-RESPONSE

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The DIAGNOSE instruction was completed with condition code 1.
  CC=2  The DIAGNOSE instruction was completed with condition code 2.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0064

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0064   ERROR DURING THE SVP FUNCTION DIAGNOSE READ FIRMWARE-INFO

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The DIAGNOSE instruction was completed with condition code 1.
  CC=2  The DIAGNOSE instruction was completed with condition code 2.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0069

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0069   ERROR DURING THE SVP FUNCTION DIAGNOSE DEFINE MEMORY DOMAINS

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The DIAGNOSE instruction was completed with condition code 1.
  CC=2  The DIAGNOSE instruction was completed with condition code 2.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0070

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0070   ERROR DURING THE SVP FUNCTION DIAGNOSE WRITE VM DATA

Meaning

During the function an error was reported by the SVP.
The returncode has the following meaning:
  BUSY  The SVP driver is busy.
  NSUP  The function is not supported.
  CC=1  The DIAGNOSE instruction was completed with condition code 1.
  CC=2  The DIAGNOSE instruction was completed with condition code 2.
  CC=3  The DIAGNOSE instruction was completed with condition code 3.

HSV0999

Destination: CONSOLE               Routing code: * (main console)    Weight: 99

Warranty   : NO

HSV0999   FUNCTION NO LONGER SUPPORTED BY SVP.

Meaning

The called function is no longer supported by the SVP.