Destination: USER-TASK Routing code: Weight: 20
Warranty : NO
NDICOPY Copyright (C) (&01) (&00). All rights reserved
NDILOAD
Destination: USER-TASK Routing code: Weight: 20
Warranty : NO
NDILOAD Program '(&00)', Version '(&01)' of '(&02)' loaded from file '(&03)'
NDIREVI
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
NDIREVI COMP=NDIMF, VER=024, DATE=2022-04-29
Meaning
NDI0500 - NDI0549: IOC, responsible IOCNTRL
NDI0580 - NDI0599: IOTRACE, responsible IOCNTRL
NDI0600 - NDI0649: NDIINIT, responsible IOCNTRL
NDI0700 - NDI0899: IOC-CMD, responsible IOCNTRL
NDI0500
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0500 ERROR IN DJCTRL
NDI0501
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0501 SAME PATHS TO DIFFERENT PDT ENTRIES
NDI0502
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0502 BOURSE ERROR
NDI0503
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0503 IOC NOT AVAILABLE. RESTART NOT POSSIBLE
NDI0504
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0504 ERROR IN KAI HANDLING
NDI0505
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0505 ERROR WHILE SCHEDULING CONTINGENCY
NDI0510
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0510 INVALID CCB ADDRESS
NDI0511
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0511 INVALID HDV
NDI0512
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0512 INVALID DEVICE ACCESS IN MAIN
NDI0513
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0513 INVALID DEVICE ACCESS IN DEREND
NDI0514
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0514 WAIT CALLER IS NOT EXCP CALLER
NDI0520
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0520 $RETMEM-ERROR DETECTED BY NDICIODP.
Meaning
In the module NDICIODP an error was detected for return memory.
NDI0530
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0530 $NBCREA-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for bourse-creation.
NDI0531
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0531 $CREAT-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for task-creation.
NDI0532
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0532 THE TASK HAS CROSSED THE RESTARTLIMIT.
Meaning
For the task an restart-routine was declared via #ENER. If this restart-
routine was entered, a restartcounter will be incremented by one.
If the restartcounter has crossed the restartlimit, the task will be
terminated.
NDI0533
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0533 $ENER-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for the declaration of the
restart-routine via $ENER.
NDI0534
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0534 $NBRORD-ERROR DETECTED BY NDIAMPR
Meaning
In the module NDIAMPR an error was detected for receive an order from
an orderbourse.
NDI0535
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0535 $NBSORD-ERROR DETECTED BY NDIAMPR
Meaning
In the module NDIAMPR an error was detected for send an order to an
orderbourse.
NDI0536
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0536 $NBSSIG-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for send an signal to the
bourse.
NDI0537
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0537 $NBREPLY-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for a request-reply at the
order-bourse.
NDI0538
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0538 $GETMEM-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for the request of memory.
NDI0539
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0539 $RETMEM-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for the return of memmory.
NDI0540
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0540 $DARMGT-ERROR DETECTED BY NDIAMPR.
Meaning
In the module NDIAMPR an error was detected for establish or release an
device-access-right (DAR).
NDI0541
Destination: CONSOLE Routing code: G Weight: 99
Warranty : YES
NDI0541 ATTENTION INTERRUPT LIMIT FOR DEVICE '(&00)' EXCEEDED.
Meaning
Too many attention interrupts received for device (&00).
Response
Switch off device (&00) and call maintenance.
NDI0550
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0550 IOCONF PARAMETER SERVICE: (&00) INSTRUCTIONS READ, (&01) INSTRUCTIONS IGNORED DUE TO ERRORS.
Meaning
(&00) instructions were received and handled by the IOCONF parameter
service, (&01) instructions were ignored because of a syntactical error
or because of invalid params. Up to 10 of these instructions will be
showed by the following NDI0551-messages.
Response
None. For the next Startup correct your param-file.
NDI0551
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0551 (&00) ERROR IN THE FOLLOWING INSTRUCTION: (&01)
Meaning
The IOCONF parameter service detected an error in this instruction.
The instruction is ignored.
Response
Correct the instruction for the next STARTUP.
NDI0580
Destination: CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0580 SYSTEM ERROR IN IOTRACE.
Response
Take dump for error analysis.
NDI0581
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0581 ERROR DURING SYSTEM CALL. IOTRACE ABORTED. DIAGNOSTIC INFORMATION: '(&00)'
Meaning
(&00): Diagnostic information
(Interface name, function id, returncode, call id)
Response
Contact system administrator.
NDI0582
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0582 ERROR WHEN ACCESSING IOTRACE MODULE LIBRARY
Meaning
An error occurred when DSSM attempted to access the IOTRACE module
library.
Possible reasons :
- library does not exist
- library is read-protected
- incorrect version of the subsystem
Response
Install IOTRACE module library with correct version.
Library must not be read-protected.
NDI0583
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0583 IOTRACE > (&00)
Meaning
An IOTRACE information is issued.
(&00) : Self explaining, language-independent text
NDI0600
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0600 FOUND DEVICE TYPE '(&00)' OF DEVICE '(&01)' INCOMPATIBLE WITH DEVICE TYPE IN SYSTEM TABLES
Meaning
The physical device, which has the same device address as the device
with mnemonic (&01) in the device table, is found to have device
type (&00). This device type is incompatible with the corresponding
device type in the device table.
Response
Check, whether the correct BS2000 file was selected for STARTUP.
NDI0601
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0601 VOLUMES ON '(&00)' (PATH '(&01)') AND '(&02)' (PATH '(&03)') BOTH HAVE THE SAME VSN. POSSIBLY INCORRECT PATH DEFINITION
Meaning
Due to the BS2000 configuration tables, path (&01) belongs to device
(&00) and path (&03) belongs to device (&02).
This may be not correct, since the volume labels read via both paths
are identical.
Response
Check, whether the correct BS2000 file was selected for STARTUP.
If the configuration tables are correct, disable the access to one
of the equally labelled volumes.
NDI0602
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0602 INCONSISTENT SUBCHANNEL NUMBERS. SYSTEM TABLES ASSIGN VALUE '(&00)', IOCF ASSIGNS VALUE '(&01)' TO DEVICE '(&02)'
Meaning
For the device with mnemonic (&02), the subchannel number (&00) in
the BS2000 configuration tables does not agree with the subchannel
number (&01) in the IOCF.
Response
Check, whether the correct BS2000 file and the correct IOCF were
selected for STARTUP.
NDI0603
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0603 CHANNEL PATH WITH ID '(&00)' FOR DEVICE '(&01)' NOT IN SYSTEM TABLES
Meaning
According to the IOCF, the device with the mnemonic (&01) is attached
to the channel with the number (&00). This attachment has however
not been defined in the BS2000 configuration tables.
Response
Check, whether the correct BS2000 file and the correct IOCF were
selected for startup.
NDI0604
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0604 NO AVAILABLE PATH TO DEVICE '(&00)' IN SYSTEM TABLES
Meaning
There is no path for the device with mnemonic (&00) in the BS2000
configuration tables matching a path for this device in the IOCF.
Response
Check, whether the correct BS2000 file and the correct IOCF were
selected for startup.
NDI0605
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0605 CHANNEL TYPE DEFINED FOR DEVICE '(&00)' DIFFERS FROM CHANNEL TYPE INDICATED BY THE DCS
Meaning
The device with mnemonic &00 is attached to a channel, of which the type
defined in the configuration cards does not agree with the channel type
indicated by the DCS in the subchannel of this device.
NDI0606
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0606 CHANNEL TYPE DEFINED FOR CHANNEL '(&00)' INCOMPATIBLE WITH TYPE OF CPU OR DIFFERENT FROM CHANNEL TYPE INDICATED BY HARDWARE
Meaning
The type of the channel with the mnemonic &00 that was defined in the
configuration cards is not allowed for the actual CPU type or does
not agree with the channel type that is indicated by the hardware for this
channel.
NDI0607
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0607 EXPDT-VERSION (&00) IS INCOMPATIBLE TO BS2-SYSTEM-VERSION (&01).
Response
Take dump for error analysis.
NDI0608
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0608 EXPDT IS GENERATED FOR CPU-LINE (&00). ACTUAL CPU-LINE IS (&01).
Response
Take dump for error analysis.
NDI0609
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0609 NDIGDAT NOT FOUND IN EOLDTAB.
Response
Take dump for error analysis.
NDI0610
Destination: CONSOLE Routing code: * (main console) Weight: 99
Warranty : NO
NDI0610 DIAGNOSIS COULD NOT BE EXECUTED.
Response
Take dump for error analysis.
NDI0700
Destination: USER-TASK, CONSOLE Routing code: R Weight: 99
Warranty : NO
NDI0700 IO INTERRUPT PARAMETERS MODIFIED
Meaning
IO interrupt parameters have been modified with the command
"MODIFY-IO-PARAMETER".
NDI0701
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
NDI0701 SYNTAX ERROR IN COMMAND '(&00)'. COMMAND REJECTED
NDI0702
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0702 SYNTAX ERROR IN OPERAND '(&00)'
NDI0703
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0703 EXECUTION ERROR AT COMMAND '(&00)'
NDI0704
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
NDI0704 CHANGE OF IO-CPU DETERMINATIONS FAILED. RC='(&00)'
NDI0705
Destination: USER-TASK Routing code: Weight: 70
Warranty : NO
NDI0705 IO-CPU INFORMATION FAILED. RC='(&00)'
NDI0706
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0706 OPERAND '(&00)' NOT SUPPORTED FOR THIS SERVER TYPE
NDI0707
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0707 MODIFICATION OF IO PARAMETERS NOT POSSIBLE AT THE MOMENT
Meaning
A change of the IO parameters is not possible, as a previous
modification is not yet completed.
NDI0708
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0708 COMMAND NOT SUPPORTED
NDI0710
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0710 INVALID OPERAND '(&00)'
NDI0711
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0711 MNEMONIC '(&00)' NOT FOUND
NDI0712
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0712 NO DEVICE AT CONTROLLER '(&00)'
NDI0713
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0713 MEMORY REQUEST FAILED
NDI0714
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0714 FAST-DPAV IS NOT SUPPORTED IN THIS SYSTEM
NDI0715
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0715 INVALID DEVICE RANGE
NDI0716
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0716 INVALID OPERAND COMBINATION
NDI0717
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0717 NO ACCORDING '(&00)' INFORMATIONS EXIST
NDI0718
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0718 '(&00)' VALUE OF '(&01)' '(&02)' MODIFIED (&03)
NDI0720
Destination: USER-TASK Routing code: Weight: 50
Warranty : NO
NDI0720 SUSPEND-IO REQUEST FOR HA-ID '(&00)' ACCEPTED. TSN OF THE EXECUTING TASK: '(&01)'
Meaning
The SUSPEND-IO command was accepted and started. The execution is under
control of the specified task. Further messages to the progress of the
request will be sent to console.
NDI0722
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0722 SUBSYSTEM SHC-OSD NOT AVAILABLE
Meaning
The function to get the device mnemonics belonging to the HA-ID can not
be performed. The required subsystem SHC-OSD is not active.
Response
Start subsystem SHC-OSD.
NDI0723
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0723 SHC-OSD CALL TO GET DEVICES FOR HA-ID '(&00)' RETURNS '(&01)'
Meaning
The call to the subsystem SHC-OSD to get the devices to the specified
HA-ID failed. (&01) gives a reason or contains the 8 hex-character
error information from SHC-OSD for this call.
NDI0724
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0724 MEMORY-REQUEST RETURNS ERROR
NDI0725
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0725 CREATION OF SYSTEM TASK RETURNS ERROR '&00'
NDI0726
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0726 TOO MANY SUSPEND-IO-REQUESTS AT A TIME
NDI0727
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0727 SUSPEND-IO REQUEST FOR THIS HA-ID ALREADY EXISTS
NDI0728
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0728 HA-ID IS UNKNOWN
NDI0729
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0729 Remote-Copy not active (Source-MN = '(&00)', Target-MN = '(&01)')
NDI0730
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0730 INTERNAL ERROR
NDI0731
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0731 Target-Disks not attached (Source-MN = '(&00)', Target-MN = '(&01)')
NDI0732
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0732 Device Information ($NDIGIN) for disk with mnemonic '(&00)' returns error '(&01)'
NDI0733
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0733 Mismatch of Remote-Copy types for disks '(&00)' and '(&01)'
NDI0750
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0750 Internal error in the VM communication
NDI0751
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0751 Internal error in the bourse handling
NDI0752
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0752 Not all expected VM systems did respond within waiting time
NDI0753
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0753 Modification of IO options completed at VM system '(&00)'
NDI0754
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0754 Modification of IO options at VM system '(&00)' terminated with error
NDI0755
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0755 Modification of IO options not supported at VM system '(&00)'
NDI0756
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0756 VM communication not supported on this system
NDI0757
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0757 VM communication for IO options not supported by '(&00)' VM systems
NDI0758
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0758 VM not privileged for global call
NDI0759
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0759 Internal error in the VM communication
NDI0760
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0760 No IO options are modified
NDI0761
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0761 IO option for FAST-DPAV is set for all devices
NDI0762
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0762 No further VM systems are running
NDI0780
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0780 /SUSPEND-IO for HA-ID '(&00)' successfully completed
NDI0781
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0781 IO-lock of HA-ID '(&00)' removed. IO resume on '(&01)'-disks
NDI0790
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0790 /SUSPEND-IO for HA-ID '(&00)' terminated with error
NDI0791
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0791 Switch of disks for HA-ID '(&00)' to target failed. ('(&01)')
Meaning
The remount of the disks of the storage-cluster with the specified HA-ID
on the target disks failed. (&01) gives more details of the problem.
NDI0792
Destination: USER-TASK, CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0792 SUSPEND-IO for HA-ID '(&00)' failed. ('(&01)')
NDI0794
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0794 Console-Message to SUSPEND-IO request for HA-ID '(&00)' is not possible ('(&01)')
Meaning
The message NDI0799 to continue a SUSPEND-IO request for the specified
HA-ID could not be sent to console. The request is aborted.
NDI0795
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0795 Target disk of HA-ID '(&00)' is already in use.('(&01)')
NDI0797
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0797 IO-REQUESTS FOR HA-ID '(&00)' SUSPENDED. WAITING FOR RESUME... REPLY (R(ESUME))
Meaning
According to a SUSPEND-IO request for the specified HA-ID IO access
to all related disks is locked. A switch to target disks is possible
now. After reply of the message IO access will be readmitted.
NDI0798
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0798 INVALID REPLY '(&00)'. REPLY IS IGNORED
NDI0799
Destination: CONSOLE Routing code: G Weight: 99
Warranty : NO
NDI0799 IO-REQUESTS FOR HA-ID '(&00)' SUSPENDED. WAITING FOR RESUME... REPLY (*TA=ON TARGET, *SO=ON SOURCE)
Meaning
According to a SUSPEND-IO request for the specified HA-ID IO access
to all related disks is locked. A switch to target disks is possible
now. After reply of the message IO access will be readmitted -
depending on the reply - on the target disks or as before on the
source disks.
NDI0800
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0800 INTERNAL ERROR ON EXECUTION OF THE COMMAND 'SHOW-FC-INFORMATION'
NDI0801
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0801 OPERAND ERROR IN COMMAND 'SHOW-FC-INFORMATION'
NDI0802
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0802 NO MATCHING DATA EXIST
NDI0803
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0803 MEMORY REQUEST FAILED
NDI0804
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0804 ERROR ON CONFIGURATION REQUEST
NDI0805
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0805 ERROR ON PORT-WWPN REQUEST
NDI0806
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0806 ERROR ON CREATING S VARIABLES
NDI0807
Destination: USER-TASK Routing code: Weight:
Warranty : NO
NDI0807 ERROR IN OBTAINING THE IO DATA