PEACOPY

Destination: USER-TASK Routing code: Weight:

Warranty : NO

PEALOAD

Destination: USER-TASK Routing code: Weight:

Warranty : NO

PEALOAD Program '(&00)' Version '(&01)' of '(&02)' loaded

PEASTRT

Destination: USER-TASK Routing code: Weight:

Warranty : NO

PEASTRT Program '(&00)' Version '(&01)' of '(&02)' started

PEA1000

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA1000 SDF CANNOT BE LOADED

Meaning

SDF cannot be dynamically loaded as a P1 subprogram.
PAMCONV is terminated with an error.

Response

Contact the system administrator.

PEA1001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA1001 NO OR INVALID SDF SYNTAX FILE SPECIFIED

Meaning

An error was detected when reading with SDF for the first time.
Possible errors:
- the PAMCONV program has not been specified in the SDF syntax file
- the version of the SDF syntax file is incorrect
- no SDF syntax file is available.
PAMCONV is terminated with an error.

Response

Contact the system administrator.

PEA1002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA1002 PROGRAM ERROR X'(&00)' IN MODULE '(&01)'

Meaning

An internal error was detected during program execution.
(&00): program error code.
(&01): internal program module name.

Response

Contact the system administrator; gather diagnostic material and
pass it on to the system diagnostics staff.

PEA1003

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA1003 STATEMENT READ ERROR. SDF RETURN CODE: X'(&00)'

Meaning

An error was detected when reading a statement with SDF.
Possible errors:
- a command was entered instead of a statement
- the entered PAMCONV statement is not contained in the system syntax
file.
PAMCONV is terminated with an error.
(&00): SDF return code (hexadecimal).

Response

Check the procedure and contact the system administrator if necessary.

PEA2001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2001 ERROR IN (&00) MACRO. ERROR CODE X'(&01)'

Meaning

An error occurred when using a system macro.
PAMCONV is terminated with an error.
(&00): name of the macro.
(&01): error code of the macro.

Response

Determine the precise nature of the error by reference to the BS2000
manual 'Executive Macros' and take the appropriate remedial action.

PEA2002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2002 DMS ERROR X'(&01)' IN (&00) MACRO, FILE '(&02)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)

Meaning

DMS error X'(&01)' occurred when using system macro (&00) for file (&02).
The run is terminated with an error.
For more detailed information on the DMS error code enter SDF command
/HELP-MSG in system mode or consult the BS2000 manual 'System Messages'
or one of the DMS manuals.
(&00): name of the macro.
(&01): DMS error code.
(&02): file name.

Response

Take appropriate action in accordance with the DMS error code.

PEA2003

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2003 PARTIALLY QUALIFIED VALUE SPECIFICATION FOR 'FROM-FILE' OPERAND MUST BE COMBINED WITH PARTIALLY QUALIFIED VALUE SPECIFICATION FOR 'TO-FILE' OPERAND

Meaning

If a partially qualified file name is specified in the FROM-FILE operand,
the file name in the TO-FILE operand must also be partially qualified,
or vice versa.
The run is terminated with an error.

Response

Check the FROM-FILE and TO-FILE operands, make the appropriate
correction(s) and repeat the run.

PEA2004

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2004 VALUES SPECIFIED FOR 'FROM-FILE' AND 'TO-FILE' ARE NOT COMPATIBLE

Meaning

The wildcard syntax of the operands FROM-FILE and TO-FILE violates
the prescribed rules.

Response

Make the appropriate correction(s) to the operands and repeat the run.

PEA2005

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2005 NO FILE SATISFIES SELECTION CRITERIA SPECIFIED IN 'FROM-FILE' OPERAND

Meaning

The run is terminated with an error.

Response

Make the appropriate correction(s) to the FROM-FILE operand and repeat
the run.

PEA2006

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2006 ERROR IN PATH NAME SPECIFIED IN 'FROM-FILE' OPERAND

Meaning

The path name specified in the FROM-FILE operand does not comply
with BS2000 conventions.
The run is terminated with an error.

Response

Make the appropriate correction(s) to the FROM-FILE operand and repeat
the run.

PEA2007

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2007 OPERAND 'VOLUME' INVALID OR VOLUME NOT AVAILABLE

Meaning

The volume serial number(s) specified in the VOLUME operand is or
are invalid or currently not available.
The run is terminated with an error.

Response

Specify or make available the correct VSN(s) and then repeat
the run.

PEA2008

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2008 OPERAND 'DEVICE' INVALID OR MISSING

Meaning

The run is terminated with an error.

Response

Specify the correct device type and repeat the run.

PEA2009

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2009 SAME FILE SPECIFIED FOR SOURCE FILE AND TARGET FILE

Meaning

No conversion is possible if the source file and the target file
are identical.
The run is terminated with an error.

Response

Make the appropriate correction(s) to the FROM-FILE and TO-FILE
operands and repeat the run.

PEA2010

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2010 ERROR IN '(&00)'-MACRO, ERROR CODE X'(&01)'. PAMCONV IS TERMINATED WITH AN ERROR.

Meaning

The file to be modified is currently in use.

Response

retry later.

PEA2011

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2011 BLKCTRL = DATA4K ONLY ALLOWED FOR ISAM FILE.

PEA2100

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2100 NO TFT ENTRY FOUND FOR 'FROM-FILE'. LINK NAME: '(&00)'

Meaning

The source file was assigned via the file link name (&00), but
no corresponding TFT entry was found.
The run is terminated with an error.

Response

Check the file link name used.

PEA2101

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2101 'FROM-FILE' DOES NOT EXIST OR IS EMPTY. SOURCE FILE: '(&00)'

Meaning

The run is terminated with an error.

PEA2102

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2102 NO TFT ENTRY FOUND FOR 'TO-FILE'. LINK NAME: '(&00)'

Meaning

The target file was assigned via the file link name (&00), but
no corresponding TFT entry was found.
The run is terminated with an error.
(&00): file link name.

Response

Check the file link name used.

PEA2103

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2103 'TO-FILE' ALREADY EXISTS. TARGET FILE: '(&00)'

Meaning

The specified target file already exists.
The run is terminated with an error.

Response

Either rename or delete the file or control overwriting of the target
file by specifying the operand REPLACE-OLD-FILES=YES or =DIALOG.

PEA2105

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2105 DMS ERROR X'(&01)' IN FILE '(&00)'. IN SYSTEM MODE: /HELP-MSG DMS(&01)

Meaning

While processing the specified file the PAMCONV program detected an
unrecoverable DMS error.
If the status byte is not equal to zero, PAMCONV then displays message
PEA2106.
For more detailed information on the DMS error code enter the SDF
command /HELP-MSG in system mode or consult the BS2000 manual
'System Messages' or one of the DMS manuals.
The run is terminated with an error.
(&00): file name.
(&01): DMS error code.

Response

Take appropriate remedial action in accordance with the DMS error code.

PEA2106

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2106 STATUS BYTE: SDB=(&00); OSB=(&01); EXFB=(&02)

Meaning

This message accompanies message PEA2105 and provides additional
information on device byte SDB, sense byte OSB and flag byte EXFB.
It is displayed only if (&00), (&01) and (&02) are not equal to zero.
The run is terminated with an error.
(&00): standard device byte SDB.
(&01): operational status byte OSB.
(&02): executive flag byte EXFB.

PEA2107

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2107 FILE OPEN ERROR X'(&01)' FOR FILE '(&00)'. IN SYSTEM MODE /HELP-MSG DMS(&01)

Meaning

The run is terminated with an error.
For more detailed information on the DMS error code enter the SDF
command /HELP-MSG in system mode or consult the BS2000 manual 'System
Messages' or one of the DMS manuals.
(&00): file name.
(&01): DMS error code.

Response

Take appropriate remedial action in accordance with the DMS error code.

PEA2108

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2108 FILE OPEN ERROR: BLKSIZE=0. FILE: '(&00)'

Meaning

The value 0 is not permitted for the BLKSIZE specification.
The run is terminated with an error.

Response

Check the file attributes and make the appropriate correction(s); then
repeat the run.

PEA2109

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2109 FILE OPEN ERROR: 'BLKSIZE' FOR DISK FILES NOT EQUAL TO STANDARD BLOCK SIZE. FILE: '(&00)'

Meaning

In the case of disk files, the block size must be the standard block
size or a multiple thereof.
The run is terminated with an error.

Response

Check the file attributes and make the appropriate correction(s); then
repeat the run.

PEA2110

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2110 FILE OPEN ERROR: '(&00)' FROM CATALOG DOES NOT MATCH TFT ENTRY. FILE: '(&01)'

Meaning

The run is terminated with an error.
(&00): file attribute, e.g. FCBTYPE, BLKSIZE, RECFORM.
(&01): file name.

Response

Check the TFT entry and make the appropriate correction(s); then
repeat the run.

PEA2111

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2111 FILE OPEN ERROR: RECSIZE VALUE IS GREATER THAN MAXIMUM POSSIBLE 'RECSIZE'. FILE: '(&00)'

Meaning

When opening the file it was discovered that the current RECSIZE value is
greater than the maximum length permitted by PAMCONV.
The run is terminated with an error.

Response

Check the RECSIZE specification and make the appropriate correction(s);
then repeat the run.

PEA2112

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2112 FILE OPEN ERROR: NO 'RECFORM' SPECIFIED FOR DISK FILES. FILE ('&00)'

Meaning

The run is terminated with an error.

Response

Check the RECFORM specification and make the appropriate correction(s);
then repeat the run.

PEA2113

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2113 FILE OPEN ERROR: 'RECSIZE' MUST BE SPECIFIED WITH RECFORM=F. FILE: '(&00)'

Meaning

The run is terminated with an error.

Response

Check the RECFORM and RECSIZE specifications and make the appropriate
correction(s); then repeat the run.

PEA2114

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2114 FILE OPEN ERROR: NO BTAM FILE SUPPORT. FILE: '(&00)'

Meaning

FCBTYPE=BTAM was detected when opening the specified file. PAMCONV
does not support the processing of BTAM files.
The run is terminated with an error.

PEA2115

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2115 FILE OPEN ERROR: INVALID COMBINATION OF 'BLKCTRL' AND 'FCBTYPE'. FILE: '(&00)'

Meaning

When opening the file it was discovered that the value of the BLKCTRL
information does not match the specified conversion direction of the
FCBTYPE of the file.
The run is terminated with an error.
(&00): file name.

Response

Check the BLKCTRL information or the conversion direction and make the
appropriate correction(s); then repeat the run.

PEA2116

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2116 CONVERSION OF SOURCE FILE TO TARGET FILE ABORTED BY USER. SOURCE FILE: '(&00)', TARGET FILE '(&01)'

Meaning

This message is displayed following message PEA3000 and the response
OVERWRITE=Y, and provides information on the abortion of the conversion
run.
The run is terminated with an error.

PEA2117

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2117 FORMAT OF TAPE FILE DOES NOT MATCH THAT OF PAMCONV INTERMEDIATE TAPE FILE. FILE: '(&00)'

Meaning

During file processing it was discovered that the file format does
not meet PAMCONV requirements.
Possible errors:
- the file attributes do not match the intermediate file attributes
requested by PAMCONV
- there is no user label
- the user label does not match the user label format requested
by PAMCONV.
The run is terminated with an error.
(&00): file name.

Response

Check the tape file to see why it cannot be processed using PAMCONV
and make the appropriate correction(s); then repeat the run.

PEA2118

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2118 FILE CLOSE ERROR X'(&01)' FOR FILE '(&00)'. IN SYSTEM MODE /HELP-MSG DMS(&01)

Meaning

DMS error code (&01) was returned on closing the specified file.
The run is terminated with an error.
For more detailed information on the DMS error code enter the SDF command
/HELP-MSG in system mode or consult the BS2000 manual 'System Messages'
or one of the DMS manuals.
(&00): file name.
(&01): DMS error code.

Response

Take the appropriate remedial action in accordance with the DMS error
code.

PEA2119

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2119 AUTOMATIC PROCESSING OF FILE GENERATION GROUP (FGG) NOT POSSIBLE. FGG: '(&00)'

Meaning

File generation group (&00) was specified in the FROM-FILE operand.
The run is terminated with an error.
(&00): name of the file generation group.

Response

An individual file generation can be processed by specifying either
the fully qualified file name of the file generation or a link
name.

PEA2120

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2120 FILE OPEN ERROR: VALUE FOR TO-FILE-BLKSIZE OR TO-FILE-BLKCTRL NOT POSSIBLE. SOURCE FILE: '(&00)'

Response

Change the value of TO-FILE-BLKSIZE or TO-FILE-BLKCTRL and try it again.

PEA2122

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2122 FILE OPEN ERROR: NO INTERN CHANGE OF THE VALUE BLKSIZE WHEN IT IS HIGHER AS (STD,1) BY PAM-FILE WITH BLKCTRL=DATA.

Response

Change the value of TO-FILE-BLKSIZE and try it again.

PEA2123

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2123 TO-FILE-BLKCTRL=NK4 NOT PERMITTED WITH DIRECTION=NONKEY-TO-KEY.

PEA2124

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2124 TO-FILE-BLKCTRL=NK4 NOT POSSIBLE BY PAM-FILE WITH BLKCTRL=DATA AND BLKSIZE GREATER (STD,1).

PEA2125

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2125 WARNING: INTERN BLOCKING UP OF A PAM FILE.

PEA2126

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2126 TO-FILE-BLKCTRL=NK4 ONLY POSSIBLE FOR ISAM FILE.

PEA2201

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2201 SOURCE FILE AND TARGET FILE ON TAPE NOT SUPPORTED BY PAMCONV. SOURCE FILE: '(&00)', TARGET FILE: '(&01)'

Meaning

The run is terminated with an error.

Response

Check the source file and target file specifications and make the
appropriate correction(s); then repeat the run.

PEA2202

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2202 FILE ALREADY EXISTS IN DESIRED FORM. FILE: '(&00)'

Meaning

The run is terminated with an error.

PEA2203

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2203 WLRERR ERROR IN BLOCK NUMBER: '(&01)'. FILE '(&00)'

Meaning

The run is terminated with an error.
(&00): file name.
(&01): logical block number.

Response

Check the file and correct it, if possible.

PEA2204

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2204 INPUT RECORD LENGTH GREATER THAN MAXIMUM POSSIBLE LENGTH FOR INPUT RECORD NUMBER: '(&01)'. FILE '(&00)'

Meaning

The run is terminated with an error.
Possible errors:
a) The record length is greater than the maximum value specified for the
input RECSIZE.
b) During conversion to non-key format a severe incompatibility was
detected in the SAM file (record longer than BLKSIZE-16).
(&00): file name.
(&01): record number of the input record in question.

Response

a) Check the RECSIZE specification and correct it as appropriate.
b) Assign the file a larger block size.
Repeat the run.

PEA2205

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2205 INPUT RECORD LENGTH GREATER THAN MAXIMUM POSSIBLE LENGTH FOR OUTPUT TO INTERMEDIATE TAPE FILE, INPUT RECORD NUMBER: '(&01)'. FILE: '(&00)'

Meaning

Maximum possible record length = 32764 bytes or, if the input record
format is F, 32760 bytes.
The run is terminated with an error.
(&00): file name.
(&01): record number of the input record in question.

Response

If possible, shorten the record length or attempt conversion via the
intermediate disk file.

PEA2206

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2206 DIFFERENT BLOCK FORMAT DETECTED FOR BLOCK NUMBER '(&01)'. FILE: '(&00)'

Meaning

During processing of file (&00) it was discovered that the block
format of the specified logical block is different from that of
the previous blocks.
The run is terminated with an error.
(&00): file name.
(&01): logical block number of the block in question.

Response

Check the block formats of the file.

PEA2207

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2207 FILE FORMAT COULD NOT BE ASCERTAINED. FILE: '(&00)'

Meaning

The run is terminated with an error.

Response

Check the file for errors.

PEA2209

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2209 CONVERSION OF 'LMR LIBRARY' NOT POSSIBLE. SOURCE FILE: '(&00)'

Meaning

LMR libraries cannot be converted using PAMCONV.
The run is terminated with an error.

Response

Conversion to a PLAM library is possible with the aid of LMS.

PEA2210

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2210 USER PART OF PAM KEY NOT EQUAL TO 0. SOURCE FILE: '(&00)'

Meaning

The source file, and therefore also the application, uses the PAM key.
Conversion using the CONVERT-FILE statement would result in data
being lost.
The run is terminated with an error.

Response

Convert the application accordingly.

PEA2211

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2211 COMBINATION OF INPUT- WITH OUTPUT-BLKSIZE BY PAM-FILE WITH BLKCTRL=DATA NOT POSSIBLE.

Response

Change the value of TO-FILE-BLKSIZE and try it again.

PEA2212

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2212 COMBINATION OF BLKCTRL=DATA AND DIRECTION=NONKEY-TO-KEY NOT POSSIBLE FOR PAM-FILE.

Response

Change the direction to KEY-TO-NONKEY and try it again.

PEA2213

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2213 PAM-FILE WITH BLKCTRL=DATA HAS NOT THE RIGHT FORMAT.

Meaning

The block control fields in a logical block do not have the required
content.

Response

By increasing the blocking factor with PAMCONV
the block control fields are properly supplied.

PEA2214

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2214 PAM-FILE WITH BLKCTRL=DATA AND BLKSIZE GREATER (STD,8) NOT POSSIBLE TO CONVERT.

PEA2215

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2215 MAXIMAL BLKSIZE OF A NK-PHASE IS (STD,2).

PEA2216

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2216 MAXIMAL BLKSIZE OF A KEY-PHASE IS (STD,1).

PEA2217

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2217 CONVERSION OF 'PLAM-LIBRARY' WITH BLKSIZE > 1 NOT POSSIBLE. TARGET FILE: '(&00)'

Meaning

Only PLAM-libraries with BLKSIZE=(STD,1) can be converted with PAMCONV.
The target file has BLKSIZE greater 1.

Response

Conversion is possible with the aid of LMS.

PEA2218

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2218 CONVERSION OF 'PLAM-LIBRARY' WITH BLKSIZE > 1 NOT POSSIBLE.

Meaning

Only PLAM-libraries with BLKSIZE=(STD,1) can be converted with PAMCONV.
Source- and target file have BLKSIZE greater 1.

Response

Conversion is possible with the aid of LMS.

PEA2219

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2219 CONVERSION OF 'PLAM-LIBRARY' WITH BLKSIZE > 1 NOT POSSIBLE. SOURCE FILE: '(&00)'

Meaning

Only PLAM-libraries with BLKSIZE=(STD,1) can be converted with PAMCONV.
The source file has BLKSIZE greater 1.

Response

Conversion is possible with the aid of LMS.

PEA2220

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2220 Input file '(&00)' is too large. Conversion is aborted

Meaning

PAMCONV does not support files:
- greater than 4TB

PEA2300

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA2300 MSG7 ERROR X'(&00)' WHEN DISPLAYING MESSAGE PEA(&01)

Meaning

The run is terminated with an error.
(&00): MSG7 error code.
(&01): PAMCONV message number.

Response

Determine the precise nature of the macro error with the aid of the
BS2000 manual 'Executive Macros' and take the appropriate remedial
action.

PEA3000

Destination: USER-TASK Routing code: Weight: 98

Warranty : NO

PEA3000 TARGET FILE '(&00)' ALREADY EXISTS. OVERWRITE FILE? REPLY (Y=YES; N=NO)

Meaning

This message is displayed if the target file already exists and the
operand REPLACE-OLD-FILES=DIALOG was specified. Further processing of
the target file depends on whether Y or N is entered.

Response

Y: the target file is overwritten.
N: the target file remains unchanged and the run is terminated with
an error.

PEA3001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3001 (&01)/(&00) PAMCONV RESUMED AFTER SWITCH TO SYSTEM MODE

Meaning

The CHANGE-TO-SYSTEM-MODE statement was used to switch to system mode.
This message is displayed once PAMCONV processing has been resumed by
means of /RESUME-PROGRAM.
(&00): CPU time (ss.nnnn).
(&01): time of day (hh:mm:ss).

PEA3002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3002 PROGRAM-ERROR DURING THE TRANSFER OF THE PROTECTION-ATTRIBUTES (PROTECTION=SAME). INTERNAL ERROR-CODE: '(&00)'.

Meaning

Possible Error-codes:
-  Wrong Opcode for the Module PEASAME             : '0000000B'
-  Userid of Source-file has no $                  : '0000000D'
-  No point at the end of the userid (Source-file) : '0000000E'
-  Userid of Target-file has no $                  : '0000000F'
-  No point at the end of the userid (Target-file) : '00000010'

Response

Check the wrong situation and repeat the run.

PEA3003

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3003 FSTAT-ERROR X'(&00)' WITH FUNCTION: PROTECTION=SAME.

Meaning

During the transfer of the protection attributes the DMS-error X'(&00)'
(FSTAT-Macro) occurred.

Response

Determine the precise nature of the error by reference to the
BS2000 manual 'Executive Macros' and take the appropriate remedial
action.

PEA3004

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3004 IT WAS NOT POSSIBLE TO TRANSFER ALL PROTECTION ATTRIBUTES. DMS-ERROR X'(&00)'.

Meaning

DMS-Error x'(&00)' occurred when using the system macro CATAL.

Response

Determine the precise nature of the error by reference to the BS2000
manual 'DMS Macros' and take the appropriate remedial action.

PEA3005

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3005 ERROR DURING THE TRANSFER OF THE ACL-ENTRIES. ERRORCODE: X'(&00)'.

Meaning

After using the macros CREFACL/DELFACL (to transfer the ACL-Entries) the
errorcode X'(&00)' occurred.

Response

Determine the precise nature of the error by reference to the BS2000
manual 'SECOS' and take the appropriate remedial action.

PEA3006

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3006 ERROR DURING THE TRANSFER OF THE CODED-CHARACTER-SET. DMS-CODE: X'(&00)'.

Meaning

DMS-error X'(&00)' occurred when using the system macro CATAL.

Response

Determine the precise nature of the error by reference to the BS2000
manual 'Executive Macros' and take the appropriate remedial action.

PEA3007

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3007 WARNING: PROTECTION=SAME WAS NOT EXECUTED, BECAUSE THE TARGET-FILE HAS A FOREIGN USERID.

Meaning

It is not possible to transfer protection attributes to files with
a foreign userid.

Response

Check the wrong situation and repeat the run.

PEA3008

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3008 WARNING: THE FUNCTION FILE-DISPOSAL HAS NOT BEEN EXECUTED. SOURCE- AND TARGET-FILE ARE STILL PRESENT.

Meaning

There has been an error with the SAME-function. The protection-attributes
could not be (completely) transferred. In this case PAMCONV works like
FILE-DISPOSAL=KEEP.

Response

Now the caller has the possibility to transfer the protection-attributes
step by step from the source-file to the target-file.

PEA3009

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3009 WARNING: SAME-FUNCTION NOT EXECUTED, TARGET-FILE IS FILE-GENERATION-GROUP.

PEA3010

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3010 WARNING: SAME-FUNCTION NOT EXECUTED, TARGET-FILE IS A TEMPORARY-FILE.

PEA3011

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3011 WARNING: REQUESTED WORKING-AREA FOR THE SAME-FUNCTION COULD NOT BE RELEASED (RELEASE-MEMORY-ERROR).

PEA3012

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA3012 WARNING: READ/WRITE/EXEC-PASSWORDS ARE ONLY TRANSFERRED WITH PRIVILEGE TSOS.

PEA4000

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA4000 WARNING: INFORMATION '(&00)' ON USER PART OF PAM KEY LOST DURING CONVERSION. FILE: '(&01)'

Meaning

(&00): user part of the PAM key (hexadecimal).
(&01): file name.

PEA4001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA4001 WARNING: SECONDARY KEY INFORMATION LOST DURING CONVERSION. FILE: '(&00)'

PEA5000

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5000 CONVERSION TO NON-KEY FORMAT COMPLETED. SOURCE FILE: '(&00)'; TARGET FILE: '(&01)'

PEA5001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5001 CONVERSION FROM NON-KEY TO KEY FORMAT COMPLETED. SOURCE FILE: '(&00)'; TARGET FILE: '(&01)'

PEA5002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5002 CONVERSION FROM KEY TO NON-KEY FORMAT COMPLETED. SOURCE FILE '(&00)' REPLACED BY TARGET FILE WITH SAME NAME

Meaning

This message confirms successful execution of a conversion step
with specification of the operand FILE-DISPOSAL=REPLACE.
- Conversion of source file (&00) in key format to target file (&01)
in non-key format was successful.
- The source file has been successfully deleted.
- The target file has been successfully recataloged under the
name of the source file.

PEA5003

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5003 CONVERSION FROM NON-KEY TO KEY FORMAT COMPLETED. SOURCE FILE '(&00)' REPLACED BY TARGET FILE WITH SAME NAME

Meaning

This message confirms successful execution of a conversion step
with specification of the operand FILE-DISPOSAL=REPLACE.
- Conversion of source file (&00) in non-key format to target file (&01)
in key format was successful.
- The source file has been successfully deleted.
- The target file has been successfully recataloged under the
name of the source file.

PEA5004

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5004 CONVERSION FROM KEY TO NON-KEY FORMAT COMPLETED. SOURCE FILE '(&00)' REPLACED BY TARGET FILE

Meaning

This message confirms successful execution of a conversion step
with specification of the operand FILE-DISPOSAL=INPLACE.
- Conversion of source file (&00) in key format to target file (&01)
in non-key format was successful.
- The target file has been successfully copied to the source file.
- The target file has been successfully deleted.

PEA5005

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5005 CONVERSION FROM NON-KEY TO KEY FORMAT COMPLETED. SOURCE FILE '(&00)' REPLACED BY TARGET FILE

Meaning

This message confirms successful execution of a conversion step
with specification of the operand FILE-DISPOSAL=INPLACE.
- Conversion of source file (&00) in non-key format to target file (&01)
in key format was successful.
- The target file has been successfully copied to the source file.
- The target file has been successfully deleted.

PEA5006

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5006 SOURCE FILE WRITTEN TO INTERMEDIATE FILE. SOURCE FILE: '(&00)'; INTERMEDIATE FILE: '(&01)'

Meaning

This message serves simply to inform the user that source file (&00)
has been written to intermediate file (&01).

PEA5007

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5007 INTERMEDIATE FILE WRITTEN TO TARGET FILE. INTERMEDIATE FILE: '(&00)'; TARGET FILE: '(&01)'

Meaning

This message serves simply to inform the user that intermediate file (&00)
has been written to source file (&01).

PEA5008

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA5008 TO-FILE-BLKSIZE=STD AND TO-FILE-BLKCTRL=NK4 NOT POSSIBLE.

Response

change the values.

PEA7000

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA7000 (&03)/(&02) PAMCONV VERSION (&00) STARTED IN BS2000 V(&01)

Meaning

(&00): PAMCONV version (Vnn.nAnn).
(&01): BS2000 version (nn.n).
(&02): CPU time (ss.nnnn).
(&03): time of day (hh:mm:ss).

PEA7001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA7001 PLEASE ENTER PAMCONV STATEMENTS

Meaning

Request to enter statements via SDF.

PEA7002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA7002 (&01)/(&00) PAMCONV TERMINATED NORMALLY

Meaning

(&00): CPU time (ss.nnnn).
(&01): time of day (hh:mm:ss).

PEA7003

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA7003 (&01)/(&00) PAMCONV TERMINATED ABNORMALLY

Meaning

Errors have occurred during the PAMCONV run. In procedures a branch
is made to the next /STEP command.
(&00): CPU time (ss.nnnn).
(&01): time of day (hh:mm:ss).

Response

Check the trace listing and files used.

PEA8000

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8000 %CURRENT LOGGING OPTIONS

PEA8001

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8001 % INFORMATION : (&00)

PEA8002

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8002 % OUTPUT : (&00)

PEA8010

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8010 % CURRENT CONVERT-FILE DEFAULTS

PEA8011

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8011 % DIRECTION : (&00)

PEA8012

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8012 % SELECT : (&00)

PEA8013

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8013 % CREATION-DATE : (&00)

PEA8014

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8014 % FROM : (&00)

PEA8015

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8015 % TO : (&00)

PEA8016

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8016 % LAST-ACCESS-DATE : (&00)

PEA8017

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8017 % SIZE : (&00)

PEA8018

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8018 % ACCESS-METHOD : (&00)

PEA8019

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8019 % REPLACE-OLD-FILES : (&00)

PEA8020

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8020 % FILE-DISPOSAL : (&00)

PEA8021

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8021 % DEVICE-FOR-TEMPFILE : (&00)

PEA8022

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8022 % VOLUME : (&00)

PEA8023

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8023 % DEVICE-TYP : (&00)

PEA8024

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8024 % (&00)

PEA8025

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8025 % TO-FILE-BLKSIZE : (&00)

Meaning

none.

Response

none.

PEA8026

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8026 % TO-FILE-BLKCTRL : (&00)

Meaning

none.

Response

none.

PEA8027

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8027 % BLKCTRL : (&00)

Meaning

Response

PEA8028

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8028 % BLKSIZE : (&00)

PEA8029

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8029 % PROTECTION : (&00)

PEA8103

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8103 % --------------------------------------------------------------------------- -------------------------

PEA8104

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8104 % (&00) FILE(S) LISTED

PEA8105

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8105 %

PEA8120

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8120 % CLASSIFY-FILE (&00) DIRECTION = (&01)

PEA8121

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8121 % FILENAME ! PAM- !FCB-! CONVER-! INCOMPATIBILITIES !

PEA8122

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8122 % ! PAGES !TYPE! TIBLE ! !

PEA8123

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8123 % (&00) !(&01)!(&02)! (&03) !(&04)!

PEA8125

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8125 % FILENAME ! CONVER- !

PEA8126

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8126 % ! TIBLE !

PEA8127

Destination: USER-TASK Routing code: Weight: 99

Warranty : NO

PEA8127 % (&00) ! (&01) !