Destination: USER-TASK Routing code: Weight:
Warranty : NO
REWCOPY Copyright (C) (&01) (&00). All rights reserved
REWE001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWE001 MU (&00) (&01) (&02) (&03) (&04) (&05)
Meaning
The management unit has reported an error.
(&00): Name of the management unit in charge
(&01)-(&05): Message text
Response
Please contact the service technician.
REWINFO
Destination: USER-TASK Routing code: Weight: 99
Warranty : YES
REWINFO (&00) (&01) (&02) (&03) (&04) (&05) (&06) (&07) (&08) (&09)
Meaning
Write results as warrented message into S variable stream SYSMSG.
REWLOAD
Destination: USER-TASK Routing code: Weight:
Warranty : NO
REWLOAD Program (&00), Version (&01) of (&02) loaded from file (&03)
REWM001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM001 SID already in use
Meaning
A BS2000 session with the specified session ID
cannot be opened because there already exists a
BS2000 session with this ID.
Response
Please contact the service technician.
REWM002
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM002 SID not in use
Meaning
There is no BS2000 session with the specified
session ID.
Response
Please contact the service technician.
REWM004
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM004 Service started successfully
REWM005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM005 Service stopped successfully
REWM006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM006 Service terminated abnormally
Meaning
The service terminated although the corresponding
BS2000 session has not been closed normally.
Response
Please contact the service technician.
REWM007
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM007 Permitted time expired
Meaning
The service has exceeded the time limit when executing
the command. Even if the service is still active, it
is considered as terminated.
Response
Please contact the service technician.
REWM008
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM008 Invalid access authorization
Meaning
BS2000 access was denied for security reasons. Most
likely caused by a faulty user ID, other causes are
possible.
Response
Please contact the service technician if the error
cause is unrecoverable.
REWM009
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM009 Service not started
Meaning
BS2000 access was denied due to a lack of resources.
Most likely caused by missing access to the default
pubset of the user ID, other causes are possible.
Response
Please contact the service technician if the error
cause is unrecoverable.
REWM010
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM010 Order not executed due to DMS error
Meaning
There was a DMS error while accessing the file.
The error cause has been sent to the management
unit as message text.
Response
Please contact the service technician if the error
cause is unrecoverable.
REWM011
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM011 Service busy
Meaning
The order could not be executed because it was
not accepted by the service within its time limit.
Response
Please contact the service technician.
REWM999
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWM999 Internal error
Meaning
Maybe, there is a memory shortage in the system.
Otherwise, the error cause has been sent to the
management unit as message text and it might be
also found in the BS2000 error logging file
$SYSWSA.SYSLOG.REWAS.<version>.ERROR
(depending on the setting in the parameter file
SYSPAR.REWAS.<version>).
Response
Please contact the service technician if the error
cause is unrecoverable.
REWSTRT
Destination: USER-TASK Routing code: Weight:
Warranty : NO
REWSTRT Procedure (&00), Version (&01) of (&02) started from file (&03)
REWS001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REWS001 Error calling RPC procedure file, reason (&00)
Meaning
(&00) : reason:
1: JSON syntax error
2: Parameter operand is longer than 20 characters
3: Parameter value is longer than 4096 characters
4: Parameter has been specified several times
5: Parameter operand is syntactically incorrect
6: Parameter "JSON.PAR" is reserved
7: Parameter "JSON.PROC-PAR" is reserved
8: Parameter "JSON.CMD" not found
9: Parameter "JSON.CMD" not of data type STRING
10: Parameter "JSON.CMD" value is empty string
Response
Please contact the service technician.
REW0001
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0001 Subsystem REWAS not supported on configuration (&00)
REW0002
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
REW0002 Error occurred during processing of file (&00)
Meaning
File contents could not be read.
REW0003
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
REW0003 Contents of file (&00) cannot be classified completely
Meaning
The file content does not correspond to the admissible values.
Response
Please correct the file contents.
REW0004
Destination: USER-TASK, CONSOLE Routing code: E Weight: 99
Warranty : NO
REW0004 The contents of file (&00), record (&01) was not accepted, reason (&02)
Meaning
In the subsystem-informationfile (&00) the contents of the record
with number (&01) could not be classified.
(&00): name of the subsystem-informationfile
(&01): serial number of the faulty record
(&02): reason:
1: invalid syntax
2: invalid key specified
3: invalid value specified
4: duplicate key specified
REW0005
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0005 MU (&00) REWAS READY ON (&01)
Meaning
The BS2000 system has been registered at the management unit.
(&00): Name of the management unit in charge
(&01): Name of the BS2000 system in the management network
REW0006
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0006 MU (&00) OFFLINE, REASON (&01)
Meaning
The connection to the management unit is interrupted.
(&00): Name of the unreachable management unit
(&01): Indication of the cause of the interruption
Selection of exit codes of the cURL program:
CURL 2: Failed to initialize.
CURL 6: Couldn't resolve host. The given remote host was not resolved.
CURL 7: Failed to connect to host.
CURL 18: Partial file. Only a part of the file was transferred.
CURL 23: Write error. Curl couldn't write data to a local filesystem
or similar.
CURL 26: Read error. Various reading problems.
CURL 27: Out of memory. A memory allocation request failed.
CURL 28: Operation timeout. The specified time-out period was reached
according to the conditions.
Note: In BS2000 the timeout for connection requests
is configured globally:
/BCTIMES CONN=<integer 5..32765>
/SHOW-BCAM-TIMER TIMER=*STD
CURL 35: SSL connect error. The SSL handshaking failed.
CURL 52: The server didn't reply anything, which here is considered an
error.
CURL 53: SSL crypto engine not found.
CURL 54: Cannot set SSL crypto engine as default.
CURL 55: Failed sending network data.
CURL 56: Failure in receiving network data.
CURL 58: Problem with the local certificate.
CURL 63: Maximum file size exceeded.
CURL 66: Failed to initialise SSL Engine.
CURL 78: The resource referenced in the URL does not exist.
CURL 79: An unspecified error occurred during the SSH session.
CURL 80: Failed to shut down the SSL connection.
Selection of http status codes supplied by the management unit:
HTTP 4xx: Client-Error
HTTP 400: Bad Request
HTTP 403: Forbidden
HTTP 5xx: Server-Error
HTTP 500: Internal Server Error
HTTP 503: Service Unavailable
HTTP 507: Insufficient Storage
REW0007
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0007 MU (&00) ONLINE
Meaning
The connection to the management unit is re-established.
(&00): Name of the recovered management unit
REW0008
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0008 Service (&00) trying to connect to control-LAN
Meaning
The REWAS-webserver tries to connect to the control-LAN.
REW0009
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0009 Service (&00) waiting for control-LAN established
Meaning
The REWAS-webserver waits for the availability of the control-LAN.
REW0010
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0010 REWAS waiting for MU online
Meaning
REWAS is waiting for reachability of the management unit.
The reachability may be affected by both network problems
and software problems of the management unit.
REW0011
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
REW0011 Hostname (&00) already registered in DNS directory
Meaning
The hostname is already registered in DNS directory by an instance
outside of a Server Unit and cannot be overwritten by the DNS entry
of the own Server Unit.
(&00): Hostname being in conflict
Response
Remove the concerned DNS entry from the DNS directory, otherwise
REWAS refuses any BS2000 administration by the Management Unit.
REW0012
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0012 MU (&00) SELECTED AS PARTNER; REASON (&01)
Meaning
REWAS selected the management unit for communication.
(&00): Name of the management unit in charge
(&01): Reason:
1 - no MU assigned by now
2 - the previous MU was disturbed
3 - the previous MU was outdated
4 - the previous MU was remote
REW0020
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
REW0020 REWAS: Interface error (&00) with return code (&03) reported from (&01)+(&02)
Meaning
In subsystem REWAS a system interface call returned with error.
In order to permit more detailed diagnosis, an entry has been
written into the SERSLOG file. REWAS takes appropriate actions to
continue processing.
(&00) : short identifier of the called function.
(&01) : module the called function is located.
(&02) : distance inside the module.
(&03) : return code of the erroneous function.
Response
Contact the system administrator or the person responsible for diagnosis.
REW0021
Destination: USER-TASK Routing code: Weight: 99
Warranty : NO
REW0021 REWAS: Internal error (&00) reported from (&01)+(&02)
Meaning
In subsystem REWAS an internal error occurred.
In order to permit more detailed diagnosis, an entry has been
written into the SERSLOG file. In a system with fault intolerance on,
a diagnostic dump will be offered.
(&00) : short identifier of the affected function.
(&01) : module the called function is located.
(&02) : distance inside the module.
Response
Contact the system administrator or the person responsible for diagnosis.
REW0022
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0022 Logging file opened (&00)
Meaning
The REWAS subsystem is in DEBUG mode
and has opened its logging file.
(&00) : Name of the logging file
REW0023
Destination: USER-TASK, CONSOLE Routing code: 9 Weight: 99
Warranty : NO
REW0023 Logging file closed (&00)
Meaning
The REWAS subsystem is in DEBUG mode
and has closed its logging file.
(&00) : Name of the logging file