After adding a new proxy or changing the configuration of an existing proxy in the Management Console, you must save and activate the configuration to bring the configuration into effect. To obtain information on outstanding activities you can use the todo topics feature (see Todo topics ).
The following description also applies if you are running the BeanConnect proxy in a cluster.
The necessary steps depend on the changes you have made.
If data such as the LU name or control point name has been modified for the openUTM-LU62 Gateway and the communication service then the configuration must be saved and the components must be restarted. Only then do the changes take effect.
The configuration must be saved and the proxy container must be restarted to bring the changes into effect if you have
changed the settings for communication with the resource adapter (see Configuring the BeanConnect resource adapter ).
created, modified or deleted an inbound user, an inbound message endpoint, an outbound service or an outbound communication endpoint.
Select one of the following commands from the context menu of the proxy:
If the proxy is running: Save/Restart – Save & Restart Proxy
If the proxy is not running: Save/Restart – Save and then start the proxy with Start Proxy.
The steps listed below are necessary and sufficient if you have added or deleted an EIS partner or changed its configuration. Activation of the new configuration cannot be carried out while the proxy is running. Therefore, proceed as follows after you have finished the configuration activities:
Select Save/Restart – Save from the context menu of the proxy.
The newly defined configuration is saved and new configuration files are generated for all EIS partners of the proxy.
If the proxy is running, stop it by selecting Stop Proxy from the context menu of the proxy. All proxy components are stopped.
Select Update Configuration from the context menu of the proxy to activate the new configuration.
Start the proxy by selecting Start Proxy from the context menu of the proxy. The proxy and proxy components are started with the changed configuration.
It may be necessary to enter the new configuration data for the EIS partner in the EIS partner