Example in menu mode

CalI IMON	Part 1: Parking IMON is started once English is set as the task-wide language for messages and masks. IMON switches to menu mode once the program is loaded and [DUE] entered. /modify-msg-attributes task-language=e /start-imon % IMOLOAD Program 'IMON-TU', version 'V03.4' of 2021-02-22' loaded from fil e ':I29A:$TSOS.SYSLNK.IMON-BAS.034.TU' % IMOCOPY Copyright (C) Fujitsu Technology Solutions 2021 All Rights Reserved PLEASE ACKNOWLEDGE The welcome screen describes the menu items for the first two steps of the installation when the standard SCI or foreign SCI is used. File Edit Show View Options ------------------------------------------------------------------------------ IMON: Welcome screen ------------------------------------------------------------------------------ *** Welcome in Installation MONitor *** Use menu File: Open: Standard SCI to display standard SCI contents. Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel
Open SCI	In the Open submenu of the File menu you select 2 (Foreign SCI...) and confirm with[DUE]. File Edit Show View Options .......................................................... ------------------- : 2 1. Standard software configuration inventory : : 2. Foreign software configuration inventory ... : ------------------- : 3. Installation definition file ... : : 4. SOLIS2 delivery ... : *** : 5. Structure and installation information file ... : : : : F1=Help F12=Cancel : :........................................................: Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel The path name for the park SCI is entered in the “Foreign SCI” dialog box: $PARKSW1.SYS.IMON-PARK.SCI. The default catalog ID for the park ID PARKSW1 is the catalog ID of the home pubset in this example. File Edit Show View Options .......................................................... ------------------- : 2 1. Standard software configuration inventory : : 2. Foreign software configuration inventory ... : ------------------- : ................................................................. : : Foreign software configuration inventory : : : ------------------------------------------------------------- : : : SCI name: $parksw1.sys.imon-park.sci : : F : : :....: F1=Help F12=Cancel : :...............................................................: Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel As the park SCI does not yet exist, it was created the first time it was opened. It does not as yet contain any entries: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SCI: :I29A:$PARKSW1.SYS.IMON-PARK.SCI ------------------------------------------------------------------------------ Units 0 through 0 of 0 SU selection More: Unit name Version Corr state *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Define work file  ID	To define the work file ID, select 2 (IMON options) in the Options menu bar and execute the mask using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SCI: :I29A: : 2 1. Switch to SDF interface : ----------------------- : 2. IMON options ... : --------------------- :..............................: ough 0 of 0 SU selection More: Unit name Version Corr state *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The path name of the default work file ID is displayed in the dialog box with  :I29A:$SYSSAG. For parking, the work files are also to be created under the park ID with the WORK prefix in the example. The path name is therefore edited accordingly and is then :I29A:$PARKSW1.WORK. File Edit Show View Options ------------------------------------------------------------------------------ : IMON options : : ---------------------------------------------------------- : --------------- : Work file location: :I29A:$parksw1.work. : 0 of 0 : Reference file ...: : More: : :I29A:$TSOS.SYS.IMON.SCI.REF : : : : F1=Help F12=Cancel : :............................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Open SOLIS2 delivery	The delivery should then be opened: Option 1 (Open) is already preset in the File menu. The mask is executed using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ : 1 1. Open ... : IMON.SCI : 2. Close : --------------------------------------------- : *. Print documentation ... : Units 0 through 0 of 0 : 4. Save as ... : tion units selection More: : 5. Exit : Version Corr state :..............................: lation units selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Option 4 (SOLIS2 delivery) for opening the SOLIS2 delivery is preset. The mask is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : : ------------------------------------------------------ : ------------------- : 4 *. Standard software configuration inventory : gh 0 of 0 : *. Foreign software configuration inventory ... : More: : 3. Installation definition file ... : te : 4. SOLIS2 delivery ... : : 5. Structure and installation information file ... : : : : F1=Help F12=Cancel : :........................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The following delivery information is then queried in the “SOLIS2 delivery” dialog box that is opened: package name, user code, distribution medium (magnetic tape is preset), the VSN, and the MTC device type. The set work file ID is displayed again in the lower section of the mask. This dialog box is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : .............................................................................. : SOLIS2 delivery : : -------------------------------------------------------------------------- : : Package name.......: <package-name> : : User code..........: sol2p : : Distribution medium: 1 1. SOLIS2 volume 2. Library : : 3. Registered 4. Local volume : : Volume.....: ge6171 : : Device type: tape-c4 : : : : Documentation library: 1 1. Standard 2. Other : : Name: : : Work file location: :I29A:$SYSSAG. : : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF : : : : Supply unit selection 1 1.Manually (*BY-DIALOG) : : 2.Automatically (*BY-CONFIGURATION) : : F1=Help F12=Cancel : :............................................................................: Command ==> F1=Help F3=Exit F10=Menu F12=Cancel IMON then has all of the information needed to open the delivery on the data medium and it starts the processing operation, during which some messages are output to the screen: IMON instructs ARCHIVE to read the specified MTC and extract files that are needed for the subsequent installation (e.g. product movement file, IMON and SOLIS2 program libraries). The “IMON” jobs started for this purpose create or expand the documentation library and start a print job for the acknowledge form. You can switch back to IMON menu mode using [DUE]. % ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142557', VERSIO N '12.0C00' % ARC0033 ARCHIVE SUBTASK TSN '0183' GENERATED % ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142610', VERSIO N '12.0C00' % ARC0033 ARCHIVE SUBTASK TSN '0184' GENERATED % JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0185 % JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0186 %PLEASE ACKNOWLEDGE
Confirm supply units	Five supply units were found on the specified MTC. IMON offers these for further processing (they are already highlighted). To select all of these supply units, execute the selection using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 SU selection More: Unit name Version Corr state X EDT 17.0 D30 X OPENFT 12.1 C10 X OPENFT-CR 12.1 B10 X PERCON 02.9 C00 X SORT 08.0 A30 *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Select park	You must then switch to the Edit menu to install the units. Option 4 (Install) is already preset. You select the Park option by entering a “5” and confirming it with [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IM : 5 *. Search ... : er code: SOL2P ------: *. Add ... : -------------------- : *. Remove ... : ough 5 of 5 : 4. Install ... : More: : 5. Park ... : tatus X EDT : *. Generate installation definition file ... : X OPENF: *. Deinstall ... : X OPENF: *. Undo ... : X PERCO: *. Activate ... : X SORT : *. Check ... : : *. Request correction delivery ... : : *. Customer-Approved Install ... : :................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Specify target system	File Edit Show View Options ....................................................................... ------ : Park parameters : : ------------------------------------------------------------------- : ------ : Target system : 5 : BS2000 version : MM.N : : Standard pubset......: 1 1. Default 2. Other : : Catid: : : : : Save old files..........: 1 1. No 2. With LMS : : 3. With ARCHIVE 4. With MAREN : : VSN............: : : Device type....: : : MAREN location : *STD : : Update RMS depot........: 1 1. Yes 2. No : : Depot Location: *STD : : : : File location...........: :I29A:$PARKSW1 : : : : F1=Help F12=Cancel : : : :.....................................................................: ------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... MM.N – current version Input for this example Target system: The supply units are to be parked for an installation for BS2000 MM.N (preset). The supply units are to be parked on the home pubset (preset). Save old files: A “2” or “3” must be entered here to back up existing files that would be overwritten by the installation operation. Backup to an LMS library (option “2”) was selected for this example. The library will be created with the following name under the work file ID:  IMON.SAVE.LIB.<package name>.<customerID>  i.e. in this example :I29A:$PARKSW1.WORK.IMON.SAVE.LIB.10MAI10617.SOL2P Update RMS depot: The RMS depot is to be updated during the park operation (preset). The depot that is updated is the default RMS depot on the home pubset (preset). File location: The files are parked on the I29A home pubset under the ID PARKSW1 (preset by the work file ID). The mask is executed using these entries and [DUE]. File Edit Show View Options ....................................................................... ------ : Park parameters : : ------------------------------------------------------------------- : ------ : Target system : 5 : BS2000 version : MM.N : : Standard pubset......: 1 1. Default 2. Other : : Catid: : : : : Save old files..........: 2 1. No 2. With LMS : : 3. With ARCHIVE 4. With MAREN : : VSN............: : : Device type....: : : MAREN location : *STD : : Update RMS depot........: 1 1. Yes 2. No : : Depot Location: *STD : : : : File location...........: :I29A:$PARKSW1 : : : : F1=Help F12=Cancel : : : :.....................................................................: ------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... IMON has then queried all of the information needed to park the delivery and starts the processing operation during which some messages are output on the screen: The :I29A:$PARKSW1.WORK.<package-name>.APR101333272021.PE park procedure will be generated: five supply units were selected for parking various processing steps must be generated. The park procedure is then fully generated. It is started immediately and automatically.
IMON output	Job ':I29A:$PARKSW1.WORK.<package-name>.APR91450162021.PE' is being generated. '5' supply units have been selected Generation of :I29A:$ PARKSW1.WORK..APR91450162021.PE startet: Generation of FSTAT-RENAME commands... Generation of SAVE-FILES commands... Generation of RESERVE-FILE commands... Generation of IMPORT-FILE commands... Generation of RMS processing commands... Generation of ACTIVATE-UNIT commands for supply units: EDT 17.0 D30 OPENFT 12.1 C10 OPENFT-CR 12.1 B10 PERCON 02.9 C00 SORT 08.0 A30 Job ':I29A:$ PARKSW1.WORK.<package-name>.APR91450162021.PE' has been generated and entered PLEASE ACKNOWLEDGE The installation procedure runs asynchronously and outputs to the console messages relating to the processing steps executed and any errors that arose. The procedure sequence can be checked in the installation log. The SHOW-JOB-STATUS command can be used in the interactive task to check whether the started installation task (TSN 0216) is already finished. The procedure sequence can be checked in the installation log. IMON switches to menu mode once [DUE] is entered. As the installation procedure is still running asynchronously, the supply units to be parked are in an undefined state and are not displayed in this mask. If a subset of the supply units in the delivery were parked and not the complete set, this mask would display those supply units that were not selected.
Close SOLIS2 delivery	The SOLIS2 delivery is closed: Option 2 (Close) is entered in the File menu and confirmed with [DUE]. This concludes the parking operation. The parked supply components can be installed at any time and as often as necessary. The rest of the example shows how to install the supply units from the park ID.
Open SOLIS2 delivery	Part 2: Installing The delivery should be installed from the park ID once it is parked:  Option 1 (Open) is already preset in the File menu. The mask is executed using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ : 1 *. Open ... : name: <package-name> User code: SOL2P : 2. Close ... : --------------------------------------------- : 3. Print documentation ... : Units 0 through 0 of 0 : 4. Save as ... : selection : 5. Exit ... : Version Corr state :..............................: SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Option 4 (SOLIS2 delivery) for opening the SOLIS2 delivery is preset. The mask is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : : ------------------------------------------------------ : ------------------- : 4 *. Standard software configuration inventory : gh 0 of 0 : *. Foreign software configuration inventory ... : More: : 3. Installation definition file ... : te : 4. SOLIS2 delivery ... : : 5. Structure and installation information file ... : : : : F1=Help F12=Cancel : :........................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The following delivery information is then queried in the “SOLIS2 delivery” dialog box that is opened: package name, user code. “3” for registered delivery is entered in the distribution medium field. The set work file ID is displayed again in the lower section of the mask. This dialog box is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : .............................................................................. : SOLIS2 delivery : : -------------------------------------------------------------------------- : : Package name.......: <package-name> : : User code..........: sol2p : : Distribution medium: 3 1. SOLIS2 volume 2. Library : : 3. Registered 4. Local volume : : Volume.....: : : Device type: : : : : Documentation library: 1 1. Standard 2. Other : : Name: : : Work file location: :I29A:$SYSSAG. : : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF : : : : Supply unit selection 1 1.Manually (*BY-DIALOG) : : 2.Automatically (*BY-CONFIGURATION) : : F1=Help F12=Cancel : :............................................................................: Command ==> F1=Help F3=Exit F10=Menu F12=Cancel The 5 parked supply units are displayed with the status “Parked”: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 SU selection More: Unit name Vers Corr Park userid Install status EDT 17.0 D30 :I29A:$PARKSW1 Parked OPENFT 12.1 C10 :I29A:$PARKSW1 Parked OPENFT-CR 12.1 B10 :I29A:$PARKSW1 Parked PERCON 02.9 A10 :I29A:$PARKSW1 Parked SORT 08.0 A30 :I29A:$PARKSW1 Parked *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Confirm supply units	For the installation, the 5 supply units are selected by highlighting them. The selection is then confirmed with [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 SU selection More: Unit name Vers Corr Park userid Install status X EDT 17.0 D30 :I29A:$PARKSW1 Parked X OPENFT 12.1 C10 :I29A:$PARKSW1 Parked X OPENFT-CR 12.1 B10 :I29A:$PARKSW1 Parked X PERCON 02.9 A10 :I29A:$PARKSW1 Parked X SORT 08.0 A30 :I29A:$PARKSW1 Parked *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Select install	You must then switch to the Edit menu to install the units. Option 4 (Install) is already preset and needs only to be confirmed with [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IM : 5 *. Search ... : er code: SOL2P ------: *. Add ... : -------------------- : *. Remove ... : ough 5 of 5 : 4. Install ... : More: : 5. Park ... : tatus X EDT : *. Generate installation definition file ... : X OPENF: *. Deinstall ... : X OPENF: *. Undo ... : X PERCO: *. Activate ... : X SORT : *. Check ... : : *. Request correction delivery ... : : *. Customer-Approved Install ... : :................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Select parameter file	The following default installation parameters options are preset by IMON in the “IMON parameter file” dialog box. File Edit Show View Options ........................................................................ ----- : IMON Parameter file : : -------------------------------------------------------------------- : ----- : Parameter file ...: 2 1. None 2. Standard 3. Other : 5 : File name: :I29A:$TSOS.SYSPAR.IMON.LAST : : : : Save parameters...: 1 1. No 2. Standard 3. Other : : File name: : : : : F1=Help F12=Cancel : :......................................................................: *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Parameter file: IMON will use the default parameter file SYSPAR.IMON.LAST from the current location, when present, to preset specific installation parameters in the following dialog boxes (preset). Save parameters: No saving of the installation parameters will be performed (preset).
Specify target system	In the “Global installation parameters” dialog box, the version and the standard pubset are already correctly preset under Target system. Option “2” in the “Work file deleting” field retains the supply units to be installed under the park ID. This entry is the minimum required if a further installation is intended. File Edit Show View Options .............................................................................. : Global installation parameters : : -------------------------------------------------------------------------- : : Target system : : BS2000 version..........: MM.N : : Standard pubset.........: 1 1. Default 2. Other : : Save old files.............: 1 1. No 2. With LMS : : 3. With ARCHIVE 4. With MAREN : : VSN........: : : Device type: MAREN location: *STD : : Undo preparation...........: 2 1. Yes 2. No : : Placement mode.............: 1 1. Standard 2. Other : : Activation preparation mode: 1 1. Standard 2. Other : : Password file..............: 2 1. Yes 2. No : : File name....: : : Read password: C' ' : : Print log files............: 2 1. Yes 2. No : : Start......................: 1 1. Immediately 2. By user : : Configuration checks.......: 1 1. Yes 2. No : : Work file deleting.........: 2 1. Yes 2. No : : : : F1=Help F12=Cancel : :............................................................................: The remaining specifications in this dialog box and also the subsequent procedure depend on the installation type required (default or customer-specific). As the open park SCI is not the standard SCI for the target system, an additional query is output when generating the installation procedure (see  "Example with SDF statements "): The installation can be registered in the (foreign) SCI currently open or in the standard SCI of the home pubset. The installation is registered in the standard SCI (as in a direct installation on the home pubset) if you respond with “N”. The subsequent procedure up to creating and starting the installation procedure can be found in the relevant examples.
Terminate IMON	IMON is terminated by entering 5 (Exit) in the File menu and [DUE] (it can also be terminated via the [F3] function key). The  section “Multiple installation of parked software” shows a further installation on an imported pubset from the park ID.