Operating System BS2000 OS DX V1.0 (en)

&pagelevel(3)&pagelevel

Change administration parameters for tape devices

Component:	SPOOL
Functional area:	Controlling spoolout job
Domain:	SPOOL-PRINT-ADMINISTRATION
Privileges:	OPERATING PRINT-SERVICE-ADMINISTRATION
Routing code:	S

Function

The MODIFY-TAPE-OUTPUT-STATUS command changes the administration parameters for the specified tape devices.
If the default value *UNCHANGED is specified then no changes are made to the initial value of the parameter in question.

Format

MODIFY-TAPE-OUTPUT-STATUS

UNIT = list-poss(8): <alphanum-name 2..2> / <alphanum-name 4..4>
,DESTINATION = UNCHANGED / NONE / ADD(...) / REMOVE(...) /
				list-poss(16): <alphanum-name 1..8> / *CENTRAL
	*ADD(...)
		\|	DESTINATION-LIST = list-poss(16): *CENTRAL / <alphanum-name 1..8>
	*REMOVE(...)
		\|	DESTINATION-LIST = list-poss(16): *CENTRAL / <alphanum-name 1..8>
,FORM-NAME = UNCHANGED / ALL / STD / EXCEPT(...) / ADD(...) / REMOVE(...) /
				list-poss(16): <alphanum-name 1..6>
	*EXCEPT(...)
		\|	FORMS-LIST = list-poss(16): <alphanum-name 1..6>
	*ADD(...)
		\|	FORMS-LIST = list-poss(16): <alphanum-name 1..6>
	*REMOVE(...)
		\|	FORMS-LIST = list-poss(15): <alphanum-name 1..6>
,FORMS-OVERLAY = UNCHANGED / ALL / NONE / ONLY / EXCEPT(...) / ADD(...) / *REMOVE(...) /
list-poss(16): <alphanum-name 2..2>
	*EXCEPT(...)
		\|	FORMS-OVERLAY-LIST = list-poss(16): <alphanum-name 2..2>
	*ADD(...)
		\|	FORMS-OVERLAY-LIST = list-poss(16): <alphanum-name 2..2>
	*REMOVE(...)
		\|	FORMS-OVERLAY-LIST = list-poss(15): <alphanum-name 2..2>
,USER-IDENTIFICATION = UNCHANGED / ALL / EXCEPT(...) / ADD(...) / *REMOVE(...) /
list-poss(16): <name 1..8>
	*EXCEPT(...)
		\|	USER-IDENT-LIST = list-poss(16): <name 1..8>
	*ADD(...)
		\|	USER-IDENT-LIST = list-poss(16): <name 1..8>
	*REMOVE(...)
		\|	USER-IDENT-LIST = list-poss(15): <name 1..8>
,SPOOLOUT-CLASS = UNCHANGED / ALL / EXCEPT(...) / ADD(...) / *REMOVE(...) /
list-poss(16): <integer 1..255>
	*EXCEPT(...)
		\|	SPOOLOUT-CLASS-LIST = list-poss(16): <integer 1..255>
	*ADD(...)
		\|	SPOOLOUT-CLASS-LIST = list-poss(16): <integer 1..255>
	*REMOVE(...)
		\|	SPOOLOUT-CLASS-LIST = list-poss(15): <integer 1..255>
,SPOOLOUT-NAME = UNCHANGED / ALL / EXCEPT(...) / ADD(...) / *REMOVE(...) /
list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
	*EXCEPT(...)
		\|	SPOOLOUT-NAME-LIST = list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
	*ADD(...)
		\|	SPOOLOUT-NAME-LIST = list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
	*REMOVE(...)
		\|	SPOOLOUT-NAME-LIST = list-poss(15): <alphanum-name 1..8> / <c-string 1..8 with-low>
,ACCOUNT = UNCHANGED / ALL / EXCEPT(...) / ADD(...) / *REMOVE(...) /
list-poss(16): <alphanum-name 1..8>
	*EXCEPT(...)
		\|	ACCOUNT-LIST = list-poss(16): <alphanum-name 1..8>
	*ADD(...)
		\|	ACCOUNT-LIST = list-poss(16): <alphanum-name 1..8>
	*REMOVE(...)
		\|	ACCOUNT-LIST = list-poss(15): <alphanum-name 1..8>
,ROTATION = UNCHANGED / ANY / NO / YES
,TWO-UP-PROCESSING = UNCHANGED / ANY / YES / NO / MODE-1 / MODE-2
,FORMS-OVERLAY-BUFFER = UNCHANGED / ANY / ONLY / NO / *RANGE(...)
	*RANGE(...)
		\|	LOW = *UNCHANGED / <integer 0..32767>
		\|	,HIGH = *UNCHANGED / <integer 0..32767>
,PRIORITY = UNCHANGED / ALL / *RANGE(...)
	*RANGE(...)
		\|	FROM = *UNCHANGED / <integer 30..255>
		\|	,TO = *UNCHANGED / <integer 30..255>
,CHARACTER-SET-NUMBER = UNCHANGED / ALL / ONE / RANGE(...)
	*RANGE(...)
		\|	LOW = *UNCHANGED / <integer 1..32767>
		\|	,HIGH = *UNCHANGED / <integer 1..32767>
,SPOOLOUT-TYPE = UNCHANGED / ALL / HP-PRINTER / PRINTER /
PAGE-PRINTER / BUFFER-LINE-PRINTER / *LIST(...)
	*LIST(...)
		\|	SELECTION-TYPE = MAY / MUST
		\|	,DEVICE-TYPE = list-poss(8): HP-PRINTER / LP-PRINTER / *LP48-PRINTER /
		\|			LP65-PRINTER / HP90-PRINTER / *LP-EMULATED-PRINTER /
		\|			2090-APA-PRINTER / 2050-APA-PRINTER / 2090-TWIN-PRINTER / PCL-PRINTER
,REVISION-NUMBER = *ANY / <integer 1..255>

Operands

UNIT = list-poss(8): <alphanum-name 2..2> / <alphanum-name 4..4>
Mnemonic device names of the tape devices whose assignment parameters are to be modified for waiting spoolout jobs.

DESTINATION =
Defines the device pools for which the spoolout jobs which can be processed on the specified tape devices are intended.

DESTINATION = *NONE
The list of local pools is cleared, i.e. spoolout jobs for local device pools are no longer processed on the specified tape devices.

DESTINATION = *ADD(...)
Device pools which are to be added to an existing list of local pools for which the spoolout jobs which can be processed on the specified tape devices are intended.

DESTINATION-LIST = list-poss(16): *CENTRAL / <alphanum-name 1..8>
List of local device pools to be added.

DESTINATION = *REMOVE(...)
Local device pools which are to be removed from an existing list of pools for which the spoolout jobs which can be processed on the specified tape devices are intended.

DESTINATION-LIST = list-poss(16): *CENTRAL / <alphanum-name 1..8>
List of local device pools to be removed.

DESTINATION = list-poss(16): <alphanum-name 1..8> / *CENTRAL
List of local device pools for which the spoolout jobs which can be processed on the specified tape devices are intended.

FORM-NAME =
Names of the forms with which spoolout jobs can be processed on the specified tape devices.

FORM-NAME = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the form used.

FORM-NAME = *STD
Only spoolout jobs with FORM=*STD can be processed on the specified tape devices.

FORM-NAME = *EXCEPT(...)
Forms with which spoolout jobs cannot be processed on the specified tape devices.

FORMS-LIST = list-poss(16): <alphanum-name 2..2>
List of excluded forms.

FORM-NAME = *ADD(...)
Forms to be added to an existing list of forms with which spoolout jobs can be processed on the specified tape devices.

FORMS-LIST = list-poss(16): <alphanum-name 1..6>
List of forms to be added.

FORM-NAME = *REMOVE(...)
Forms which are to be removed from an existing list of forms with which spoolout jobs can be processed on the specified tape devices.

FORMS-LIST = list-poss(15): <alphanum-name 1..6>
List of forms to be removed.

FORM-NAME = list-poss(16): <alphanum-name 1..6>
List of forms with which spoolout jobs can be processed on the specified tape devices.
If there is already a (positive) list of forms for the specified tape devices it is replaced by this new list.

FORMS-OVERLAY =
Film overlays with which spoolout jobs can be processed on the specified tape devices.

FORMS-OVERLAY = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the film overlays specified.

FORMS-OVERLAY = *NONE
Only spoolout jobs which do not use film overlays can be processed on the specified tape devices.

FORMS-OVERLAY = *ONLY
Only spoolout jobs which use (any) film overlay can be processed on the specified devices.

FORMS-OVERLAY = *EXCEPT(...)
Film overlays with which spoolout jobs cannot be processed on the specified tape devices.

FORMS-OVERLAY-LIST = list-poss(16): <alphanum-name 2..2>
List of excluded film overlays.

FORMS-OVERLAY = *ADD(...)
Film overlays to be added to an existing list with which spoolout jobs can be processed on the specified tape devices.

FORMS-OVERLAY-LIST = list-poss(16): <alphanum-name 2..2>
List of film overlays to be added.

FORMS-OVERLAY = *REMOVE(...)
Film overlays which are to be removed from an existing list with which spoolout jobs can be processed on the specified tape devices.

FORMS-OVERLAY-LIST = list-poss(15): <alphanum-name 2..2>
List of film overlays to be removed.

FORMS-OVERLAY = list-poss(16): <alphanum-name 2..2>
List of film overlays with which spoolout jobs can be processed on the specified tape devices.

USER-IDENTIFICATION =
User IDs under which spoolout jobs can be processed on the specified tape devices.

USER-IDENTIFICATION = *ALL
Spoolout jobs can be processed on the specified tape devices under all user IDs.

USER-IDENTIFICATION = *EXCEPT(...)
User IDs under which spoolout jobs cannot be processed on the specified tape devices.

USER-IDENT-LIST = list-poss(16): <name 1..8>
List of excluded user IDs.

USER-IDENTIFICATION = *ADD(...)
User IDs to be added to an existing list of user IDs under which spoolout jobs can be processed on the specified tape devices.

USER-IDENT-LIST = list-poss(16): <name 1..8>
List of user IDs to be added.

USER-IDENTIFICATION = *REMOVE(...)
User IDs which are to be removed from an existing list of user IDs under which spoolout jobs can be processed on the specified tape devices.

USER-IDENT-LIST = list-poss(15): <name 1..8>
List of user IDs to be removed.

USER-IDENTIFICATION = list-poss(16): <name 1..8>
List of user IDs under which spoolout jobs can be processed on the specified tape devices.If there is already a (positive) list of user IDs for the specified tape devices, it is replaced by this new list.

SPOOLOUT-CLASS =
Spoolout classes from which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-CLASS = *ALL
Spoolout jobs from all spoolout classes can be processed on the specified tape devices.

SPOOLOUT-CLASS = *EXCEPT(...)
Spoolout classes from which spoolout jobs cannot be processed on the specified tape devices.

SPOOLOUT-CLASS-LIST = list-poss(16): <integer 1..255>
List of excluded spoolout classes.

SPOOLOUT-CLASS = *ADD(...)
Spoolout classes to be added to an existing list of spoolout classes from which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-CLASS-LIST = list-poss(16): <integer 1..255>
List of spoolout classes to be added.

SPOOLOUT-CLASS = *REMOVE(...)
Spoolout classes to be removed from an existing list of spoolout classes from which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-CLASS-LIST = list-poss(15): <integer 1..255>
List of spoolout classes to be removed.

SPOOLOUT-CLASS = list-poss(16): <name 1..8>
List of spoolout classes from which spoolout jobs can be processed on the specified tape devices.
If there is already a (positive) list of spoolout classes for the specified tape devices, it is replaced by this new list.

SPOOLOUT-NAME =
Job names under which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-NAME = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the job name.

SPOOLOUT-NAME = *EXCEPT(...)
Job names under which spoolout jobs cannot be processed on the specified tape devices.

SPOOLOUT-NAME-LIST = list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
List of excluded job names.

SPOOLOUT-NAME = *ADD(...)
Job names to be added to an existing list of job names under which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-NAME-LIST = list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
List of job names to be added.

SPOOLOUT-NAME = *REMOVE(...)
Job names which are to be removed from an existing list of job names under which spoolout jobs can be processed on the specified tape devices.

SPOOLOUT-NAME-LIST = list-poss(15): <alphanum-name 1..8> / <c-string 1..8 with-low>
List of job names to be removed.

SPOOLOUT-NAME = list-poss(16): <alphanum-name 1..8> / <c-string 1..8 with-low>
List of job names under which spoolout jobs can be processed on the specified floppy disk devices.
If there is already a (positive) list of job names for the specified tape devices it is replaced by this new list.

ACCOUNT =
Account numbers with which spoolout jobs can be processed on the specified tape devices.

ACCOUNT = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the account number.

ACCOUNT = *EXCEPT(...)
Account numbers under which spoolout jobs cannot be processed on the specified tape devices.

ACCOUNT-LIST = list-poss(16): <alphanum-name 1..8>
List of excluded account numbers.

ACCOUNT = *ADD(...)
Account numbers to be added to an existing list of account numbers under which spoolout jobs can be processed on the specified tape devices.

ACCOUNT-LIST = list-poss(16): <alphanum-name 1..8>
List of account numbers to be added.

ACCOUNT = *REMOVE(...)
Account numbers which are to be removed from an existing list of account numbers under which spoolout jobs can be processed on the specified tape devices.

ACCOUNT-LIST = list-poss(15): <alphanum-name 1..8>
List of account numbers to be removed.

ACCOUNT = list-poss(16): <name 1..8>
List of account numbers under which spoolout jobs can be processed on the specified tape devices.
If there is already a (positive) list of account numbers for the specified tape devices it is replaced by this new list.

ROTATION =
Indicates whether spoolout jobs which require the page rotation module can be processed on the specified tape devices.

ROTATION = *ANY
Spoolout jobs can be output on the specified tape devices whether they require the page rotation module or not.

ROTATION = *NO
Only spoolout jobs which do not require the page rotation module can be processed on the specified tape devices.

ROTATION = *YES
Only spoolout jobs which require the page rotation module can be processed on the specified tape devices.

TWO-UP-PROCESSING = *UNCHANGED / *ANY / *YES / *NO / *MODE-1 / *MODE-2
Specifies 'TWO-UP' processing for the specified HP90 (2090, 2140) printers (see the “SPOOL” manual [43]).

FORMS-OVERLAY-BUFFER =
Indicates whether spoolout jobs which use an FOB overlay can be processed on the specified tape devices.

FORMS-OVERLAY-BUFFER = *ANY
Spoolout jobs with and without FOB overlays can be processed on the specified tape devices.

FORMS-OVERLAY-BUFFER = *ONLY
Only spoolout jobs which require an FOB overlay can be processed on the specified tape devices.

FORMS-OVERLAY-BUFFER = *RANGE(...)
Only spoolout jobs with FOB overlays which lie within the specified size range can be processed on the specified tape devices.

LOW = *UNCHANGED / <integer 0..32767>
Lower limit of the range.

HIGH = *UNCHANGED / <integer 0..32767>
Upper limit of the range.

PRIORITY =
Priorities with which spoolout jobs can be processed on the specified tape devices.

PRIORITY = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of their priority.

PRIORITY = *RANGE(...)
Spoolout jobs with priorities within this range can be processed on the specified tape devices.

FROM = *UNCHANGED / <integer 30..255>
Lower limit of the range.

TO = *UNCHANGED / <integer 30..255>
Upper limit of the range.

CHARACTER-SET-NUMBER =
Spoolout jobs can be processed on the specified tape devices according to the number of character sets required.

CHARACTER-SET-NUMBER = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the number of character sets required.

CHARACTER-SET-NUMBER = *ONE
Only spoolout jobs which require no more than one character set can be processed on the specified tape devices.

CHARACTER-SET-NUMBER = *RANGE(...)
Spoolout jobs with a number of required character sets which falls within the range can be processed on the specified tape devices.

LOW = *UNCHANGED / <integer 1..32767>
Lower limit of the range.

HIGH = *UNCHANGED / <integer 1..32767>
Upper limit of the range.

SPOOLOUT-TYPE =
Spoolout jobs for certain types of output device can be processed on the specified tape devices.

SPOOLOUT-TYPE = *ALL
Spoolout jobs can be processed on the specified tape devices irrespective of the type of output device for which they were created.

SPOOLOUT-TYPE = *HP-PRINTER
Only spoolout jobs for printers of type 3351/3353 can be processed on the specified tape devices.

SPOOLOUT-TYPE = *PRINTER
Only spoolout jobs for printers can be processed on the specified tape devices.

SPOOLOUT-TYPE = *PAGE-PRINTER
Only spoolout jobs for laser printers can be processed on the specified tape devices.

SPOOLOUT-TYPE = *BUFFER-LINE-PRINTER
Only spoolout jobs for line printers with loadable buffers (3337, 3338, 3339, 3348, 3349) can be processed on the specified tape devices.

SPOOLOUT-TYPE = *LIST(...)
Spoolout jobs for the specified list of device types can be processed on the specified tape devices.

SELECTION-TYPE = *MAY / *MUST
The selection of spoolout jobs

is restricted to those which at least may be output on one of the specified device types (*MAY)
is restricted to those which must be output on one of the specified device types and may not be output on any device type than the ones specified (*MUST).

DEVICE-TYPE = list-poss(8): *HP-PRINTER / *LP-PRINTER / *LP48-PRINTER / *LP65-PRINTER /
*HP90-PRINTER / *LP-EMULATED-PRINTER / *2090-APA-PRINTER / *2050-APA-PRINTER /
*2090-TWIN-PRINTER / *PCL-PRINTER
List of device types. For the symbolic names see the “SPOOL” manual [42].

REVISION-NUMBER = *ANY / <integer 1..255>
The number given must match the current revision number.

Return codes

(SC2)	SC1	Maincode	Meaning
	0	CMD0001	No error
2	0	SCP0915	Element to be deleted not found
2	0	SCP0954	Only first 100 pools activated for the device
	1	CMD0202	Syntax error
	1	SCP0973	Semantic error
	32	SCP0974	System error. Command rejected
	64	SCP0975	No authorization for command
	64	SCP0976	Invalid operand value

Your Browser is not longer supported

Please use Google Chrome, Mozilla Firefox or Microsoft Edge to view the page correctly

MODIFY-TAPE-OUTPUT-STATUS

Function

Format

Operands

Return codes