This chapter describes the hardware and software requirements for IMON, how IMON is supplied, and how you install it.
Hardware requirements
IMON V3.4 can be run on all servers which support BS2000 V21.0.
You need 9750, 9755, 9763, 8160, 3270 or equivalent data display terminals to output the FHS masks.
FHS masks are output in IMON
on the menu interface of IMON-BAS and IMON-SIC
for the SDF statements of IMON-BAS (dialog masks for requesting further input).
Software requirements
BS2000 V21.0 or higher
Optionally required:
SSCM (for dynamic activation)
ARCHIVE (for MAREN free tape assignment during backup)
EDT (for UNDO function and deinstallation)
IMON release units
The product IMON is made up of the three release units.
IMON-BAS, IMON-GPN, and IMON-SIC.
The IMON product is part of the basic configuration of BS2000.
Installation rules for IMON
The following installation IDs are possible for the IMON release units:
IMON-GPN must be installed under the TSOS user ID.
IMON-BAS can be installed under any user ID, the TSOS user ID is required for the release items SYSDAT.IMON-BAS.034.IDF and SYSPRC.IMON-BAS.034 only.
IMON-SIC can be installed under any user ID.
Providing POSIX-IMON functions
The procedure file SYSPRC.IMON-BAS.034 must be made available under the name
$TSOS.SYSPRC.IMON-BAS with USER-ACCESS=*ALL-USER.
To ensure that the POSIX-IMON functions are available in further installation processes, IMON must be registered in the POSIX system as follows.
Create an “in-file” with the following lines (the delivery includes a prepared in-file with the name
SYSDAT.IMON-BAS.034.POSIX) :[PackageInstallation] IMON-BAS;Y;034;;Register IMON with the following command:
/START-POSIX-INSTALLATION *FILE(FILE=<in-file>)Stop and restart the POSIX subsystem
Installation variants for IMON
Initial installation of IMON
IMON-BAS, IMON-GPN and IMON-SIC are part of the scope of supply for the basic configuration and are installed along with BS2000.
Correction installation of IMON
IMON already available in the system; the IMON and IMON-GPN subsystems are started.
All correction or delta release units of IMON can be installed using IMON and SOLIS2 as described in this manual.
- IMON-GPN V3.4A is required to run IMON V3.4A. IMON-GPN cannot be exchanged while BS2000 is running. After updating IMON-GPN, the BS2000 system must be reloaded before additional components are installed.
Supply components of the release unit IMON-BAS V3.4
File | Contents |
SINLIB.IMON-BAS.034 | Library for POSIX functions |
SYSDAT.IMON-BAS.034.IDF | Exception file for specific functions (GENERATE-IDF) |
SYSDAT.IMON-BAS.034.POSIX | In-file for registration in the POSIX system |
SYSFHS.IMON-SIC.034.D | Library for IMON-BAS masks (German) |
SYSFHS.IMON-SIC.034.E | Library for IMON-BAS masks (English) |
SYSLIB.IMON-BAS.034 | Library with the user macros for the various SHOW functions |
SYSLNK.IMON-BAS.034.TU | Load library for non-privileged IMON-BAS programs |
SYSLNK.IMON-BAS.034.TPR | Load library for privileged parts of IMON-BAS (for the /390 type) |
SKMLNK.IMON-BAS.034.TPR | Load library IMON-BAS (for the x86 type) |
SYSMES.IMON-BAS.034 | Complete message file |
SYSNRF.IMON-BAS.034 | Non-referenced symbol file |
SYSPAR.IMON-BAS.034 | Sample of an IMON parameter file |
SYSPRC.IMON-BAS.034 | Procedure file for provision of POSIX processing |
SYSREP.IMON-BAS.034 | File for system corrections (dummy item) |
SYSRMS.IMON-BAS.034 | RMS supply set |
SYSSDF.IMON-BAS.034 | Syntax file |
SYSSSC.IMON-BAS.034 | Subsystem declarations |
SYSSII.IMON-BAS.034 | IMON installation information |
Supply components of the release unit IMON-GPN V3.4
File | Contents |
SYSLIB.IMON-GPN.034 | Library containing the user macros (program interface) |
SYSLNK.IMON-GPN.034 | Load library IMON-GPN (for the /390 type) |
SKMLNK.IMON-GPN.034 | Load library IMON-GPN (for the x86 type) |
SYSMES.IMON-GPN.034 | Complete message file |
SYSRMS.IMON-GPN.034 | RMS supply set |
SYSSDF.IMON-GPN.034 | Syntax file |
SYSSII.IMON-GPN.034 | IMON installation information |
SYSSSC.IMON-GPN.034 | Subsystem declarations |
Supply components of the release unit for IMON-SIC V3.4
File | Contents |
SYSFHS.IMON-SIC.034.D | Library for IMON-SIC masks (German) |
SYSFHS.IMON-SIC.034.E | Library for IMON-SIC masks (English) |
SYSLIB.IMON-SIC.034 | Library containing the user macros (program interface) |
SYSLNK.IMON-SIC.034 | Load library for IMON-SIC |
SYSMES.IMON-SIC.034 | Complete message file |
SYSNRF.IMON-SIC.034 | Non-referenced symbol file |
SYSREP.IMON-GPN.034 | File for system corrections (dummy item) |
SYSRMS.IMON-SIC.034 | RMS supply set |
SYSSDF.IMON-SIC.034 | Syntax file |
SYSSII.IMON-SIC.034 | IMON installation information |
IMON subsystems
IMON’s tasks are carried out by three subsystems:
IMON-GPN subsystem (is started at STARTUP) for IMON-GPN’s tasks
IMON (TPR) subsystem for IMON-BAS’ tasks (is started when IMON-BAS is called using the START-IMON command)
IMON-ACT (TU) subsystem for IMON-BAS’ tasks (is started during the course of an installation procedure)