Outputs

Error messages and logging messages, as well as the concluding success messages are routed to the same output destination as the information on inconsistencies, i.e. to the destination output(s) specified by TEXT-OUTPUT.
In interactive mode, the success message and the logging messages are also output to SYSOUT if TEXT-OUTPUT=*SYSLST.

If the information on inconsistencies is not output in text form (TEXT-OUTPUT=*NONE), the error messages, the message relating to the start of the function, and the concluding success message are output to SYSOUT.

1. In interactive mode: Table of the SF pubsets to be converted to volume sets from the ADD-VOLUME-SET operand with the specified logical attributes.
   This table is output to SYSOUT regardless of the TEXT-OUTPUT operand.

   Refer to mask 12 in section "Outputs to screen masks" for format details.
   This mask provides the user with the option of canceling the function by making an appropriate entry in the footer.

2. Table of the SF pubsets to be converted to volume sets from the ADD-VOLUME-SET operand with specification of the disk format and specified logical attributes.

   Refer to mask 13 in section "Outputs to screen masks" for format details.
   This mask provides the user with the option of canceling the function by making an appropriate entry in the footer.

3. Logging messages:

   • Message indicating that the function or task executing the function has been started

   • Progress log: message that the GUARDS/FACS/SRPM/CMS conversion has been started

   • Result message of the consistency check: The result message is always output to SYSOUT in interactive mode, independent of the TEXT-OUTPUT operand.

   • In special cases, or in the event of termination on error, further messages may be issued first.

4. The following takes place in the event of an error:

   • The illegal files, name conflicts, over-long names, guard condition errors are listed as for CHECK-NAME-CONSISTENCY (see section “Outputs”).

     Refer to masks 2-11 in section "Outputs to screen masks" for format details.

   • If there are files in one of the pubsets that have been converted to S1 and S1-MIGRATED-FILES=*ALLOWED is not specified, an error message is issued. (One message for each pubset affected).

Outputs in simulation mode

1. Result message after syntax check

2. Table of the SF pubsets to be converted to volume sets from the ADD-VOLUME-SET operand with the specified logical attributes.
   Refer to mask 12 in section "Outputs to screen masks" for format details.