This section contains measurement results for the performance of the x86 server SE300B when connected to an ETERNUS DX 440 S2 storage system via FC.
The following configuration was used to make the measurements:
SU300B-80F server with 1,200 RPF in native mode.
Connection of the x86 server to the storage system via 6 FC connections each with a performance of 8 Gbit. The various volumes and LUNs were each accessible over three paths here.
The ETERNUS DX440 S2 storage system with a 96-GB cache and physical disks each with a capacity of 450 GB and operating at 15,000 rpm
16 volumes on disks of the type D3435 with data format NK2 with low mutual interference (1-2 volumes each on a RAID group RAID 1/0(3+3)).
All the tasks performed only synchronous IOs.