Message texts part1

EDTCOPY	Copyright (C) (&00) (&01) All Rights Reserved
EDTLOAD	Program ’(&00)’, Version ’(&01)’ of ’(&02)’ loaded from file ’(&03)’
EDTSTRT	Procedure ’(&00)’, Version ’(&01)’ of ’(&02)’ started from file ’(&03)’
EDT0001	(&00) STARTED
	Meaning EDT was started.
EDT0002	(&00) RESTARTED IN COMPATIBILITY MODE Meaning A statement changing the operation mode was given. EDT was restarted in compatibility mode.
EDT0003	(&00) RESTARTED IN UNICODE MODE Meaning A statement changing the operation mode was given. EDT was restarted in Unicode mode.
EDT0100	TESTMODE: NO SYNTAX ERROR Meaning Test mode is set. There was no syntactical error. The statements have not been processed. Error switch: not set.
EDT0110	TESTMODE: SYNTAX CANNOT BE TESTED Meaning Test mode is set. The statement has not been processed. But its syntax can only be tested at run time. Possible reasons: indirect operands, operands in variables or user statements. Error switch: not set.
EDT0120	TESTMODE: CHARACTER(S) SKIPPED Meaning Test mode is set. The syntax check in line mode skipped one or more characters. A strict syntax check with the option SECURITY=HIGH would possibly find an error. Error switch: not set. Response See your EDT manual for the correct syntax of the statement. Correction to the therein described form will ensure processing in following EDT versions. The support of this statement is not guaranteed.

EDT0160 EDT0170	FILE ’(&00)’ WRITTEN MEMBER ’(&00)’ IN LIBRARY ’(&01)’ REPLACED AND WRITTEN Meaning The old content of the library element was replaced.
EDT0171	FILE ’(&00)’ REPLACED AND WRITTEN Meaning The old content of the file was replaced.
EDT0172	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ CREATED AND WRITTEN Meaning The library element was created and written.
EDT0173	FILE ’(&00)’ CREATED AND WRITTEN Meaning The file was created and written.
EDT0178	FILE ’(&00)’ CLOSED
EDT0190	WORK FILE (&00) EMPTY
EDT0193	WORK FILE (&00) CLEARED
EDT0196	UFS FILE ’(&00)’ REPLACED AND WRITTEN

	Meaning The old content of the POSIX file was replaced.
EDT0197	UFS FILE ’(&00)’ CREATED AND WRITTEN Meaning The POSIX file was created and written.
EDT0200	CCS CHANGED TO ’(&00)’ Meaning By reading or opening a file or library element with the attribute (&00) EDT uses this Coded Character Set. Error switch: not set.
EDT0210	ELEMENT(S) ADDED TO S-VARIABLE ’(&00)’ Meaning The SDF-P list variable (&00) has been extended by appending or prefixing one or more elements to the list.

EDT0211	/FREE-VARIABLE COMMAND PROCESSED FOR S-VARIABLE ’(&00)’ Meaning The contents of the SDF-P variable (&00) have been destroyed. In the given statement @SETLIST with operand MODE=NEW the specified range did not contain any line or column.
EDT0227	ISAM FILE ’(&00)’ CREATED AND OPENED IN WORK FILE (&01) Meaning The ISAM file was created and opened in actual work file.
EDT0228	ISAM FILE ’(&00)’ REPLACED AND OPENED IN WORK FILE (&01) Meaning The old content of the ISAM file was deleted, then the file was opened in actual work file.
EDT0229	ISAM FILE ’(&00)’ OPENED IN WORK FILE (&01) Meaning The ISAM file was opened in actual work file.
EDT0230	FILE ’(&00)’ OPENED IN CURRENT WORK FILE (&01) Meaning The file was opened in actual work file.
EDT0231	FILE ’(&00)’ CREATED AND OPENED IN CURRENT WORK FILE (&01) Meaning The file was created and opened in actual work file.
EDT0232	FILE ’(&00)’ REPLACED AND OPENED IN WORK FILE (&01) Meaning The old content of the file was deleted, then the file was opened in actual work file.
EDT0235	FILE ’(&00)’ WRITTEN AND CLOSED Meaning The file was written and closed.
EDT0236	FILE ’(&00)’ CLOSED UNCHANGED Meaning The file was closed unchanged.
EDT0237	UFS FILE ’(&00)’ OPENED Meaning The POSIX file was opened in actual work file.

EDT0238	UFS FILE ’(&00)’ CREATED AND OPENED Meaning The POSIX file was created and opened in actual work file.
EDT0239	UFS FILE ’(&00)’ REPLACED AND OPENED Meaning The old content of the POSIX file was deleted, then the file was opened in actual work file.
EDT0240	UFS FILE ’(&00)’ CLOSED Meaning The POSIX file was written and closed.
EDT0241	UFS FILE ’(&00)’ CLOSED UNCHANGED Meaning The POSIX file was closed unchanged.
EDT0242	FILE ’(&00)’ COPIED Meaning The file was copied into the actual work file.
EDT0243	UFS FILE ’(&00)’ COPIED Meaning The POSIX file was copied into the actual work file.
EDT0244	ALLOW WRITE ACCESS FOR READ ONLY FILE? REPLY (Y=YES; N=NO) Meaning This query is issued following a @OPEN, @WRITE, @XOPEN or @XWRITE statement if the POSIX file is read only and the current user id is TSOS. Response Y: the file will be overwritten/opened for writing N: the file will not be overwritten/opened for writing.
EDT0258	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ OPENED Meaning The library element was opened in actual work file.
EDT0259	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ CREATED AND OPENED Meaning The library element was created and opened in actual work file.

EDT0264	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ WRITTEN AND CLOSED Meaning The library element was written and closed.
EDT0265	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ CLOSED UNCHANGED Meaning The library element was closed unchanged.
EDT0266	WORK FILE EMPTY: MEMBER ’(&00)’ CLOSED UNCHANGED Meaning The work file specified in the CLOSE or WRITE statement is empty. The member (&00) has been closed but not written back.
EDT0268	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ OPENED FOR REPLACEMENT Meaning The library element was opened in actual work file, the old content was not read.
EDT0274	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ COPIED Meaning The library element was copied into the actual work file.
EDT0281	/DELETE-FILE COMMAND PROCESSED FOR FILE ’(&00)’ Meaning The file has been erased from catalog.
EDT0282	DELETE PROCESSED FOR MEMBER ’(&00)’ Meaning The element has been deleted from library.
EDT0283	UFS FILE ’(&00)’ DELETED Meaning The POSIX file has been removed from its directory.
EDT0285	SDF: SYNTAX TESTED. (&00) ERROR(S) IN RANGE Meaning At the processing of statement @SDFTEST (&00) errors have been detected. Error switch: not set.
EDT0290	ALL LINES ARE DIFFERENT Meaning All lines to be compared are different. Error switch: EDT.

EDT0291	ALL LINES ARE EQUAL Meaning All lines to be compared are equal. Error switch: not set.
EDT0292	COPY BUFFER CLEARED Meaning Acknowledgement following an ’*’ in the mark column.
EDT0293	FILE NOT WRITTEN Meaning N has been specified in response to an OVERWRITE inquiry.
EDT0294	MAXIMUM LINE NUMBER Meaning The screen cannot be completely filled with empty lines after the last used line, as not enough line numbers are available.
EDT0295	OLD COPY BUFFER CLEARED, NEW COPY BUFFER FILLED Meaning An R statement code is followed by a C or M statement code. The copy buffer created by means of R statement code(s) has been cleared.
EDT0296	OVERWRITE FILE? REPLY (Y=YES; N=NO) Meaning This query is issued following a @WRITE or a @SAVE statement if the file already exists. Response Y: the file will be overwritten N: the file will not be overwritten.
EDT0297	COMPARE RESULT IN WORK FILE (&00) Meaning The result of a successfully processed @COMPARE statement (format 2) is output to work file (&00). Error switch: EDT.
EDT0298	ERASE ALL JOB VARIABLES ’(&00)’? REPLY (Y=YES; N=NO) Meaning This query is issued following a @ERAJV statement, if the name was specified partially qualified or in wildcard syntax and this refers to more than one job variable. Response Y: all job variables concerned will be erased from the catalog. N: the statement will be aborted and no job variable will be erased.

EDT0299

JOB VARIABLES NOT ERASED

Meaning
Message EDT0298 (ERASE ALL JOB VARIABLES?) was answered with N.

EDT0300

(&00)

Meaning
Following a @TMODE statement, the task attributes are displayed
from left to right in this order:

TSN	- task sequence number
USER ID	- user ID in the /LOGON command
ACCOUNT	- account number of the task
CPU TIME	- CPU time used for the task
DATE	- date (YYYY-MM-DD)
TIME	- time (HH:MM:SS)
STATEMENT SYMBOL	- actual statement symbol
TERMINAL	- type of terminal.

EDT0610

BUFFER SIZE UNCHANGED

Meaning
The buffer for output to the screen could not be changed by EDT.
Error switch: not set.

EDT0650

UNABLE TO SUPPORT NATIONAL TERMINAL. STANDARD WILL BE USED

Meaning
The connected DSS is a national 7-bit terminal, but EDT can only support
it with standard functions. Possible reasons:

• The DSS has been generated with wrong parameters or a variant has been
  used EDT cannot support yet.

• There is problem at XHCS or VTSU.

Response
Try to generate the DSS in a different way.

EDT0651

CCS ’(&00)’ CANNOT BE SET. STANDARD WILL BE USED

Meaning
At EDT initialisation, the character set (&00) shall be made the actual character set. As this
is not possible with the current operation mode, the 7 bit standard EDF03IRV is used
instead.

EDT0900

EDITED FILE(S) NOT SAVED!

Meaning
A @HALT (or another) statement has been entered in order to terminate EDT, but some
data have not yet been saved.
EDT will output a list of work files whose data have not yet been saved.

EDT0901	NO MATCH IN RANGE Meaning No match exists for the search string in the specified range when processing an @ON statement. Error switch: EDT. If this error occurs while an EDT procedure (@DO or @INPUT) is being processed, and logging by means of the PRINT operand has not been activated, this message is not displayed and the EDT error switch is not set.
EDT0902	FILE (&00) VERSION (&01) Meaning Possible reasons: The file (&00) has been specified in a write access statement with the version number ’*’ or the actual version number: The new actual version number after writing is (&01). The file (&00) has been specified in a read access statement with the version number ’*’ or a wrong version number: The correct version number is (&01).
EDT0903	FILE ’(&00)’ IS IN THE CATALOG, FCBTYPE = (&01) Meaning The file (&00) ist already in the catalog, its access method is (&01).
EDT0904	TERMINATE EDT? REPLY (Y=YES; N=NO) Meaning Inquiry whether EDT is to be terminated. Response Y: EDT will be terminated N: EDT will not be terminated.
EDT0905	EDITED MEMBER TO BE ADDED? REPLY (Y=YES; N=NO) Meaning Before returning control to LMS, EDT inquires whether the edited work file is to be saved by LMS.
EDT0906	REPEAT ATTEMPT? REPLY (Y=YES; N=NO) Meaning If there is not enough virtual memory space to process the statement the statement can be repeated after appropriate measures have been taken. Response Y: The attempt will be repeated. N: The statement will be aborted.

EDT0907	NO WORK FILES USED Meaning A @DROP ALL statement has been issued by the user but no work files are currently used.
EDT0909	AUTOSAVE ABORTED. ERASE SAVING FILES? REPLY (Y=YES; N=NO) Meaning The writing of the backup files could not be performed. Possible reasons are a virtual address space shortage or an unexpected DMS error. The automatic saving is switched off. Response Y: existing saving files will be erased. N: existing saving files will not be erased.
EDT0910	’@RENUMBER’: LINES WILL BE LOST Meaning A @RENUMBER statement has been entered in order to renumber the lines. If EDT renumbers in the asked way, the maximum line number (9999.9999) would be reached and the rest of the file would be deleted. Response Get information about the number of lines in the work file by entering the statement @LIMIT before asking to renumber.
EDT0911	CONTINUE PROCESSING? REPLY (Y=YES; N=NO) Meaning At the processing of a statement an error has been detected. EDT inquires whether it should continue processing. Response Y: Processing of the statement will be continued. N: The statement will be aborted.
EDT0912	INTERRUPTION NOT POSSIBLE Meaning The K2-key has been pushed during a non-interruptable procedure. It is not possible to change to system mode at the moment.
EDT0913	/INFORM-PROG TO BE SIMULATED? REPLY (Y=YES; N=NO) Meaning The command /INFORM-PROGRAM cannot be performed in a non-interruptable procedure. EDT asks if an action should be performed. Response Y: EDT treats like /INFORM-PROGRAM has been given. N: The program will be continued.

EDT0914	RECORD SIZE > 256. ONLY 256 CHARACTERS WILL BE WRITTEN Meaning Only 256 characters are written for each record, the rest of the records becomes undefined.
EDT0915	CONVERT TO FILE CCS (&00)? REPLY (Y=YES; N=NO) Meaning The work file’s Coded Character Set is different from that of the file to be written to. Response Y: convert to file’s character set before writing. N: use work file’s character set for writing.
EDT0990	(&00) Meaning (&00): Message from test routine.
EDT0999	(&00) Meaning (&00): Message from external routine.
EDT1137	SPECIFIED WORK FILE IGNORED IN CONJUNCTION WITH ’SPLIT’ Meaning In the @PAR statement a work file has been specified as the first operand. The actions initiated by the @PAR statement are to be performed only with regard to the specified work file, but the effect of the operand SPLIT is global.

EDT1150 EDT1151 EDT1174

NAME OF PLAM LIBRARY MEMBER TRUNCATED AFTER 64 CHARACTERS VERSION OF PLAM LIBRARY MEMBER TRUNCATED AFTER 24 CHARACTERS FILE ATTRIBUTES IGNORED Meaning By means of the @WRITE statement (format 2) an internal work file is written back to the associated external BS2000 file. File attributes cannot be defined by means of the @WRITE statement, as they have already been defined for the external file. The specified file attributes are ignored.

EDT1180

CODE ATTRIBUTE IGNORED Meaning By means of the XWRITE statement the actual work file is written back to the UFS file opened before by means of XOPEN. The CODE attribute was ignored, as there is already one defined for that file. By asking to write the file with MODE=UPDATE that attribute cannot be changed. Error switch: not set.

	Response A change of the code can be performed in the following way: Write back the work file with MODE=REPLACE und requested CODE-Operand and then close the file by issuing @CLOSE NOWRITE.
EDT1181	CODE OPERAND IGNORED Meaning A POSIX file, a not existing DMS file or a not existing library element shall be written using @WRITE CODE=*FILE. For POSIX files the code set defined with @PAR CODE is used, for other files the code set of actual work file.
EDT1190 EDT1226	WORK FILE (&00) IS EMPTY. COPY OPERATION NOT PERFORMED SPECIFIED FCBTYPE IGNORED: ’(&00)’ IS ASSUMED Meaning The FCB type specified in the @OPEN or @WRITE statement (format 2) does not match the catalog entry. The specified type is ignored and the FCBTYPE (&00) is taken over from the catalog.
EDT1227	CCS ATTRIBUTE CANNOT BE SET Meaning The file has been created or updated, but the CCS attribute cannot be set, as the access to file catalog or library catalog returned an error. Error switch: EDT, DMS.
EDT1243	FILE ’(&00)’ TO BE COPIED IS EMPTY Meaning The DMS file to be copied into the actual work file is empty. Error switch: EDT.
EDT1244 EDT1245	FILE ’(&00)’ EMPTY JOB VARIABLE IS EMPTY Meaning An attempt has been made to get the value of a job variable by a @GETJV statement, but the entire job variable is empty. Error switch: EDT.
EDT1246	UFS FILE ’(&00)’ TO BE COPIED IS EMPTY Meaning The POSIX file to be copied into the actual work file is empty. Error switch: EDT.

EDT1247	MEMBER ’(&00)’ IN LIBRARY ’(&01)’ TO BE COPIED IS EMPTY Meaning The library element to be copied into the actual work file is empty. Error switch: EDT.
EDT1248	EMPHASIS INCOMPLETE IN SOME LINES Meaning When the lines containing the search string are displayed on the screen after an @ON statement, not all matches are emphasized, as the insertion of screen control characters makes one or more lines too long. Error switch: EDT.
EDT1253	(SOME) RECORD(S) TRUNCATED Meaning Records that are too long are truncated when being read into the internal work file (in Unicode Mode after 32768, otherwise after 256 characters). Error switch: EDT.
EDT1254	NO MARKS SET FOR FILE TO BE PROCESSED IN REAL MODE Meaning No marks can be set for files processed in real mode (statement @OPEN). Error switch: EDT.
EDT1901	ISAM FILE. ’@GET’ STATEMENT PROCESSED Meaning A @READ statement has been entered for an ISAM file. EDT automatically processes a @GET statement. Error switch: EDT.
EDT1902	SAM FILE. ’@READ’ STATEMENT PROCESSED Meaning A @GET statement has been entered for a SAM file. EDT automatically processes a @READ statement. Error switch: EDT.
EDT1903	INPUT TRUNCATED Meaning In Unicode mode, a line exceeds the maximum length (32768 characters) during tabulator expansion. The line will be truncated. In compatibility mode, when reading data in line mode or the element of a list variable, more than 256 characters are read. The input will be truncated. Error switch: EDT.

EDT1904	SOME LINES > 256 Meaning Some lines read by means of a @GET or @READ statement are longer than 256 bytes. The lines concerned are truncated after 256 characters. Error switch: EDT.
EDT1905	INPUT TOO LONG. CORRECT INPUT Meaning The following conditions cause a termination error when reading: input for a @CREATE...READ statement >256 bytes, or input >284 subsequent to a @PRINT statement and input request *+-0, or input of a statement with indirect operands and the sum of characters of operation string and the length of the string variable exceeds 256. Error switch: not set.
EDT1906	TOO MANY NAMES. LIST INCOMPLETE Meaning The 15 pages provided for FSTAT are not sufficient to accommodate all the file names, or the 8 pages provided for STAJV are not sufficient to accommodate all the names of job variables, or the 8 pages provided for CMD are not sufficient to accommodate all the lines to be output to the buffer. The list (of names) is not complete. Error switch: EDT.
EDT1907	MODULE CANNOT BE UNLOADED Meaning The module specified in the @RUN statement or in the @UNLOAD statement could not be unloaded. Either an incorrect module name has been specified or the module is not loaded. Error switch: EDT.
EDT1936	MODIFIED LINE > 256 CHARACTERS Meaning An edited line became too long as a result of modification. This error can be caused by an @ON, @PREFIX, @SUFFIX, @COL or @CREATE statement. Moreover, an extended line containing formal operands may have become too long in a procedure. The line is truncated after 256 characters. In a @SETJV statement, when the extended string for the value of a job variable became too long, only the first 256 characters are taken over as the value. Error switch: EDT.
EDT1937	MODIFIED LINE > 32768 CHARACTERS Meaning A work file line would become too long as a result of modification with an @ON statement. The line will remain unchanged. Error switch: EDT.

EDT1938	MODIFIED LINE > 32768 CHARACTERS Meaning A @DO procedure line would become too long as a result of parameter replacement. The line will be truncated. Error switch: EDT.
EDT2169	WORK FILE (&00) IS EMPTY. WRITE OPERATION NOT PERFORMED Meaning The statement @WRITE (format 2) or @XWRITE could not be performed, for the work file (&00) is empty. Error switch: not set.
EDT2266	WORK FILE IS EMPTY: MEMBER ’(&00)’ CLOSED UNCHANGED Meaning As the work file specified in the @CLOSE or @WRITE statement (format 2) is empty, the member (&00) has been closed but not saved.
EDT2267	LINE TRUNCATED AFTER (&00) CHARACTERS Meaning As the input record in F mode is longer than the LIMIT specified in the @PAR statement, it is truncated. (&00): maximum permissible record length.
EDT2301	COPY BUFFER OVERFLOW Meaning The copy buffer cannot hold more than 256 line numbers.
EDT2400	LINE TRUNCATED AFTER 32768 CHARACTERS Meaning A @CREATE or @SETJV statement, a J statement code or a data input with tabulator expansion results in a work file line with more than 32768 characters. The line will be truncated after 32768 charcters. Error switch: EDT.
EDT2401	LINE TRUNCATED AFTER 2048 BYTES Meaning The prompt string to be displayed for @CREATE statement (format 3 or 4) is too long. It is truncated after 2048 bytes. Error switch: EDT.

EDT2402	OUTPUT TRUNCATED AFTER (&00) CHARACTERS Meaning The prompt string to be output for statement @CREATE (format 3 or 4) is too long. It is truncated after (&00) characters. Error switch: EDT. Response Shorten string.
EDT2403	OUTPUT TRUNCATED AFTER 4096 BYTES Meaning The string to be assigned to a S variable is too long. It is truncated after 4096 bytes. Error switch: EDT.
EDT2404	NOT ENOUGH LINES FOR HEX MODE Meaning On a split screen there are less lines in the work window than would be needed for diplaying a line in hexadecimal mode. Error switch: EDT. Response Enlarge the work window (@PAR SPLIT).
EDT2405	LINE TRUNCATED DURING AUTOSAVE Meaning Whe a work file is saved using @AUTOSAVE, a line is longer than the maximum record line of the saving file. The line will be truncated. Error switch: EDT.
EDT2406	MAXIMUM LINE NUMBER Meaning The given statement was processed correctly, but the new actual line can not be the last line of the work file incremented with the actual increment, because the maximum line number (9999.9999) would be exceeded. The new actual line will become the last line of the work file. Error switch: EDT.
EDT2407	OUTPUT OF SYSTEM COMMAND TRUNCATED Meaning The output of the operating system command issued via @SYSTEM is too long, it will be truncated. Error switch: EDT.

EDT2408	LOGGING TERMINATED Meaning The output media specified in @LOG cannot be written to. Logging will be switched off. Error switch: EDT.
EDT2409	CPU TIME SPECIFIED AT EDT START EXCEEDED Meaning The CPU time specified at EDT start has been exceeded. EDT will be continued. Error switch: EDT.
EDT2900	A KEY WAS ZERO AND HAS BEEN SET TO 0.0001 Meaning A key with the value 0 has been detected during processing of a @GET or @READ statement (with the KEY function). The line number in the work file is set to 0.0001 for this line. Error switch: EDT.
EDT2901	CHECK LINE LENGTH Meaning The line length check is active (@CHECK or @TABS) and the line read or created by tabulator expansion is longer than specified in the CHECK statement or operand. The line will be created as specified. Error switch: EDT.
EDT2902	CHECK TAB COLUMNS Meaning The CHECK function was specified in the @TABS statement. CHECK detected that the line which has just been entered with tabs causes reverse positioning, i.e. text was overwritten. Error switch: EDT. Response Check the line, as it probably contains an error.
EDT2903	FILE IS EMPTY Meaning Possible error cause: An empty file on disk is accessed by means of a @READ, @GET, @INPUT or @ELIM statement. A @SETLIST statement has been specified in an empty work file. A work file specified in a @COMPARE statement is empty. Error switch: EDT.

EDT2904	MAXIMUM LINE NUMBER WHEN PROCESSING ’@RENUMBER’. SOME LINES ARE LOST Meaning The maximum permissible line number (9999.9999) has been reached during processing of a @RENUMBER statement. EDT does not permit duplicate line numbers in a work file. The rest of the file has been erased. Error switch: EDT.
EDT3002	OPERAND ERROR Meaning The statement contains a syntax error. Error switch: EDT. Response Correct and re-enter the statement.
EDT3003	’(’ MISSING Meaning Error switch: EDT. Response Insert the missing bracket and re-enter the statement.
EDT3004	’)’ MISSING Meaning Error switch: EDT. Response Insert the missing bracket and re-enter the statement.
EDT3040	NAME INVALID OR MISSING Meaning The string contains more than 8 characters or does not fullfill the syntax of the operand or is missing. Error switch: EDT. Response Correct and re-enter the statement.
EDT3050	INVALID SYSLST-NUMMER Meaning The SYSLST number issued in the statement @LOG is invalid. Only values between 1 and 99 are valid. Error switch: EDT. Response Correct and re-enter the statement.

EDT3065	NUMBER OF LINES OR ’OFF’ OR ’O’ EXPECTED Meaning The operand SPLIT of the @PAR statement must contain either the number of lines of the second window and the name of the work file to be displayed in the second window, or OFF or O in order to set the screen back to one window. Error switch: EDT. Response Correct and re-enter the statement.
EDT3066	WRONG COLUMN NUMBER Meaning A wrong column number has been specified in the @SETF statement. Error switch: EDT. Response Correct and re-enter the statement.
EDT3068	POSITION INVALID OR MISSING Meaning The specification of POSITION in the @SETF statement is mandatory. The statement could not be processed. Response Correct and re-enter the statement.
EDT3069	STRING TO BE INSERTED IS MISSING Meaning The statement has not been processed because the string to be inserted is missing. Response Correct and re-enter the statement.
EDT3070	’EDIT-LONG’ EXPECTED Meaning The operand specified in the @PAR statement is wrong. Correct form of the operand: @PAR EDIT-LONG = ... . Response Correct and re-enter the statement.

EDT3071	’ON’, ’OFF’ OR ’O’ EXPECTED Meaning The operand specification in the @PAR statement contains an error, ON, OFF or O is missing after an equals sign. Error switch: EDT. Response Correct and re-enter the statement.
EDT3072	NUMBER INVALID OR MISSING Meaning The format of the specified numeric value is incorrect, or the value has not been specified at all. Error switch: EDT. Response Correct and re-enter the statement.
EDT3073	TARGET POSITION IS INVALID OR MISSING Meaning The statement has not been processed because the target position in the COPY statement is missing or invalid. Response Correct and re-enter the statement.
EDT3074	’KEEP’ OPERAND EXPECTED IN ’COPY’ STATEMENT Meaning The COPY statement has not been processed because the operand KEEP is missing. Response Correct and re-enter the statement.
EDT3075	RECORD RANGE CANNOT BE SPECIFIED Meaning The statement has not been processed because no record range can be specified in the statement. Response Correct and re-enter the statement.
EDT3076	’COPY KEEP’ PERMISSIBLE ONLY FOR ISAM FILES Meaning The KEEP operand in the COPY statement can only be specified for ISAM files. The statement has not been processed.

EDT3077	OPERAND ’STRUCTURE=’ INCORRECT Meaning In the @PAR statement the symbol for STRUCTURE is either missing or not given in single quotes. Error switch: EDT. Response Correct and re-enter the statement.
EDT3078	SPECIFIED NUMBER INVALID (VALID RANGE: 1..256) Meaning The specified value for LIMIT in the @PAR statement or the factor n in the repetition statement # is not within the permissible range. Error switch: EDT. Response Correct and re-enter the statement.
EDT3079	COLUMN ’0’ NOT PERMISSIBLE Meaning The statement has not been processed because ’0’ cannot be specified as a column number. Response Correct and re-enter the statement.
EDT3080	SPECIFIED COLUMN INVALID, OR ’:’ MISSING IN COLUMN RANGE Meaning The character ’:’ is missing in the specified column range, or the specified range is invalid. Error switch: EDT. Response Correct and re-enter the statement.
EDT3081	LINE NUMBER > 9999.9999 Meaning The specified line number is too high. The maximum permissible line number is 9999.9999. Error switch: EDT. Response Correct and re-enter the statement.
EDT3082	LINE NUMBER 0 INVALID Meaning Line number 0 or increment 0 cannot be specified. Error switch: EDT.

	Response Correct and re-enter the statement.
EDT3085	’(&00)’ NOT POSSIBLE FOR PLAM ELEMENT TYPE ’(&01)’ Meaning Library elements of the type R, C, H, L, U, F or corresponding free type cannot be used with the statements @COPY, @OPEN, @WRITE or @INPUT. Error switch: EDT. Response Correct and re-enter the statement.
EDT3086	INVALID PLAM TYPE Meaning The PLAM type specified in the statement is invalid. Valid PLAM types: S, M, J, P, D, X, R, C, H, L, U, F and equal free typenames. A free typename must not start with $ or SYS and consists of 2 to 8 characters.
EDT3087	INVALID JOB VARIABLE NAME Meaning The string used to specify a job variable name is incompatible with the syntax of a job variable name, or the job variable name in a @SETJV or @GETJV statement was not fully qualified, or it was an invalid request by an @ERAJV statement. Error switch: EDT. Response Correct and re-enter statement.
EDT3088	INVALID NAME OF S-VARIABLE Meaning The string used to specify a SDF-P variable in a @GETVAR or @SETVAR statement is incompatible with the syntax of a SDF-P variable. Error switch: EDT. Response Correct and re-enter the statement.
EDT3089	INVALID NAME OF UFS FILE Meaning A string used for specifying the name of a UFS file did not follow the syntax of a file name in the POSIX file system or one of the directories issued does not exist. Error switch: EDT. Response Correct and re-enter the statement.

EDT3093	INVALID STRUCTURED NAME OR STRUCTURED NAME MISSING Meaning The string contains more than 30 characters or does not fulfil the syntax of the operand or is missing. Error switch: EDT. Response Correct and re-enter the statement.
EDT3100	WORK FILE IS EMPTY. STATEMENT NOT PROCESSED Meaning The statement refers to a line number which cannot be found as the work file is empty.
EDT3101	INVALID STATEMENT Meaning No valid EDT statement has been recognized. Error switch: EDT. Response Correct and re-enter the statement.
EDT3106	SPECIFIED WORK FILE INVALID (VALID RANGE: 0..9) Response Correct and re-enter the statement.
EDT3110	EQUAL SIGN EXPECTED. STATEMENT NOT PROCESSED Meaning Error switch: EDT. Response Correct and re-enter the statement.
EDT3111	’TYPE’ OPERAND IS MISSING OR INVALID Meaning The TYPE operand has been specified without a valid operand value. Error switch: EDT. Response Correct and re-enter the statement.

EDT3112	’TYPE’ OPERAND ALREADY DEFINED Meaning An attempt was made to specify the TYPE operand a second time. Error switch: EDT. Response Correct and re-enter the statement.
EDT3116	’CODE’ OPERAND MISSING OR INVALID Meaning The CODE operand has been specified without a valid operand value. Error switch: EDT. Response Correct and re-enter the statement.
EDT3117	’MODE’ OPERAND MISSING OR INVALID Meaning The MODE operand has been specified without a valid operand value. Error switch: EDT. Response Correct and re-enter the statement.
EDT3118	’MODE’ OPERAND ALREADY DEFINED Meaning An attempt was made to specify the MODE operand a second time. Error switch: EDT. Response Correct and re-enter the statement.
EDT3119	WORK FILE ALREADY DEFINED Meaning In the OPEN or WRITE statement, an attempt was made to define the work file a second time. Response Correct and re-enter the statement.
EDT3120	FILE NAME ALREADY DEFINED Meaning In the OPEN or WRITE statement, an attempt was made to define the file name a second time. Response Correct and re-enter the statement.

EDT3121	LIBRARY NAME MISSING OR FORMAT OF SPECIFIED LIBRARY NAME INVALID Meaning Error switch: EDT. Response Correct and re-enter the statement.
EDT3122	FILE NAME MISSING OR FORMAT OF SPECIFIED FILE NAME INVALID Meaning Error switch: EDT. Response Correct and re-enter the statement.
EDT3123	NO VALID NAME OF PLAM MEMBER Meaning When processing a PLAM library, no valid member name has been specified. Error switch: EDT. Response Correct and re-enter the statement.
EDT3124	VERSION NUMBER MISSING OR INVALID Meaning The version number of a PLAM library member has not been specified or the specified version number contains invalid characters. Error switch: EDT. Response Correct and re-enter the statement.
EDT3125	’OPEN REAL’ PERMISSIBLE ONLY FOR ISAM FILES Meaning It is not possible to process the specified file in OPEN REAL mode because that mode is permitted only for ISAM files. Response Process the specified file in virtual memory.
EDT3126	FILE ATTRIBUTES CANNOT BE SPECIFIED Meaning It is not possible to specify file attributes in the relevant statement, therefore the statement has not been processed.

EDT3127	NAME OF WORK FILE IS INVALID OR MISSING Meaning No name has been specified for the work file, or the specified name is invalid. Error switch: EDT. Response Correct and re-enter the statement.
EDT3128	PLAM LIBRARY NAME INVALID OR MISSING Meaning Error switch: EDT. Response Correct and re-enter the statement.
EDT3129	NO FILE ATTRIBUTES CAN BE DEFINED FOR PLAM LIBRARIES Meaning When processing a PLAM library an attempt was made to define the file attribute FCBTYPE=ISAM or SAM. The statement has not been processed. Response Correct and re-enter the statement.
EDT3132	PLAM TYPE IS MISSING OR INVALID Meaning The TYPE of the PLAM member has not been specified in the statement, or the specification is invalid. Error switch: EDT. Response Correct and re-enter the statement.
EDT3133	PLAM VERSION SPECIFICATION INVALID Meaning Error switch: EDT. Response Correct the version specification and re-enter the statement.
EDT3134	’*STD’ EXPECTED Meaning When processing a PLAM library, ’*’ has been specified for the type or the version. Response Replace ’*’ by ’*STD’ and re-enter the statement.

EDT3135	MODUL NAME MISSING Meaning The @UNLOAD statement has not been processed for the name of the modul has not been specified. Response Correct and re-enter the statement.
EDT3136	’INCREMENT=0’ NOT PERMISSIBLE Meaning The specification INCREMENT=0 in the @PAR statement is not permitted. The statement has not been processed. Response Correct and re-enter the statement.
EDT3138	ONLY ONE CHARACTER POSSIBLE AS SYMBOL Meaning More than one character has been specified as a symbol. Error switch: EDT. Response Correct and re-enter the statement.
EDT3170	SYNTAX ERROR IN LINE NUMBER Meaning The operand which is supposed to be a line number is syntactically incorrect. Error switch: EDT. Response Correct and re-enter the statement.
EDT3172	MODULE NAME TOO LONG Meaning The modul name specified in an @UNLOAD statement was longer than 8 characters (compatible format) or longer than 32 characters (new format). Error switch: EDT. Response Correct and re-enter the statement.
EDT3173	NUMBER OF WORK FILE FOR COMPARE OPERATION MISSING OR INVALID Meaning Error switch: EDT. Response Correct and re-enter the statement.

EDT3174	NAME TOO LONG Meaning A string used for specifying a file or jobvariable name consists of more characters than allowed by the system (fully qualified: 54, with wildcards: 80). Error switch: EDT. Response Correct and re-enter the statement.
EDT3175	SYNTAX ERROR IN SPECIFIED RANGE Meaning Error switch: EDT. Response Correct and re-enter the statement.
EDT3176	STATEMENT SYMBOL INVALID OR TOO LONG Meaning The statement symbol in the @USE statement must be specified within single quotes and must consist of exactly one character. Response Correct and re-enter the statement.
EDT3177	ENTRY NAME TOO LONG Meaning The entry name is longer than the permissible maximum of 8 characters (compatible format) or 32 characters (new format). Error switch: EDT. Response Correct and re-enter the statement.
EDT3178	LIBRARY NAME TOO LONG Meaning The library name is longer than the permissible maximum of 54 characters. Error switch: EDT. Response Correct and re-enter the statement.