Command return codes for file transfer and file management

The command return codes listed in the table below may occur in connection with file transfer and file management. They apply to the following commands

CREATE-REMOTE-DIR
DELETE-REMOTE-DIR
DELETE-REMOTE-FILE
GET-REMOTE-FILES
MODIFY-FILE-ATTRIBUTES
MODIFY-REMOTE-DIR-ATTR
MODIFY-REMOTE-FILE-ATTRIBUTES
TRANSFER-FILE
TRANSFER-FILE-SYNCHRONOUS

(SC2)	SC1	Maincode	Meaning
0	0	FTR0000	Request accepted. The request ID is present as an insert in the SYSOUT message.
0	0	CMD0001	The file transfer request has been successfully completed. Follow-up processing has been started for both the local system and the remote system, as requested, provided no error occurred. Local errors are indicated a message.
20	64	FTR0020	The command was not executed. Send file unknown.
35	128	FTR0035	File locked to prevent multiple access. The send file or the receive file is already locked by another process to prevent it from being updated simultaneously.
41	128	FTR0041	Request queue full.
108	128	FTR0108	Remote system not accessible.
32	32	CMD0221	Request rejected. Internal error. Job variable not accessible.
33	32	CMD0221	Request rejected. Internal error.
34	32	FTR0802	Warning: Job variable contents inconsistent.
35	64	FTR0803	Request rejected. Follow-up processing could not be started. Incorrect specifications for the admission to perform follow-up processing (processing admission).
865	32	FTR0865	Not all files transferred successfully.
36	32	CMD0221	Request rejected. Request data inconsistent.
82	32	CMD0221	Internal error. Job variable not accessible.
83	32	CMD0221	Internal error.
84	32	CMD0221	Internal error. Current instance incompatible.
85	32	CMD0221	Internal error. The command could not be executed because openFT code could not be loaded.
86	32	CMD0221	Writing of log records no more possible. Process terminated.
87	32	CMD0221	No space left on device for internal files.
88	32	CMD0221	Error during ops generation.
89	32	CMD0221	Error in key file '>>1<<'.
90	32	CMD0221	Internal error. Set / release file-locks not possible.
94	32	CMD0221	Protocol stack '>>1<<' not installed.
95	32	CMD0221	FTAC subsystem not available.
231	32	CMD0221	openFT panic >>1<<. Abnormal termination.
2	0	FTR2014	No file attribute changes requested.
15	64	FTR2015	openFT is not authorized to execute requests for this user.
16	64	FTR2016	The specified directory is not empty.
17	64	FTR2017	File attributes do not match request parameters.
18	64	FTR2018	Attributes could not be modified.
19	64	FTR2019	File could not be created.
21	64	FTR2021	CCS name unknown.
22	64	FTR2022	Higher-level directory not found.
23	64	FTR2023	The command was not executed. Receive file already exists.
24	64	FTR2024	Transfer of file generation groups not supported.
25	64	FTR2025	Error accessing. DMS error, possibly the transfer ID.
26	64	FTR2026	Resulting file name too long. The relative file name was specified in the transfer request. The absolute file name completed by openFT is longer than permitted.
27	64	FTR2027	No file name specified. Request ID present as insert in the SYSOUT message.
28	64	FTR2028	Invalid management password.
29	128	FTR2029	The volume for either the send file or the receive file is not mounted.
30	64	FTR2030	Home directory not found.
31	64	FTR2031	Renaming not possible.
128	32	FTR2032	The command was not (fully) executed. Not enough space.
33	64	FTR2033	The command was not executed. The owner of the file is unknown in the system.
34	64	FTR2034	Invalid file password.
36	64	FTR2036	Retention period of file not yet expired.
37	64	FTR2037	File is read only.
38	64	FTR2038	File structure not supported.
39	64	FTR2039	Syntax error in resulting file name.
42	64	FTR2042	Extension of file not possible for transparent transfer.
43	64	FTR2043	Access to file denied.
44	64	FTR2044	Follow-up processing exceeds length limit.
45	64	FTR2045	Processing admission invalid.
46	64	FTR2046	Local transfer admission invalid.
47	64	FTR2047	Request rejected by local FTAC.
48	64	FTR2048	The function is not available for the selected protocol.
49	64	FTR2049	Remote follow-up processing not supported.
50	64	FTR2050	Data integrity check not supported.
51	64	FTR2051	User data encryption not possible for this request.
70	64	FTR2070	openFT is no longer authorized to execute requests for this user.
71	64	FTR2071	User data encryption not installed.
72	64	FTR2072	The FT request was canceled because, for example, the command CANCEL-FILE-TRANSFER was specified, or the time specified in TRANSFER-FILE has been reached.
73	64	FTR2073	Encryption error.
74	64	FTR2074	Request rejected. The file could not be created.
75	64	FTR2075	Higher-level directory no longer found.
76	64	FTR2076	Request rejected. I/O error. Receive file may have been deleted.
77	128	FTR2077	File now locked to prevent multiple access The command was not executed because the send file or the receive file is already locked by another process so that it cannot be simultaneously updated.
78	128	FTR2078	Request rejected. the volume for either the send file or the receive file is not available.
79	64	FTR2079	File no longer found. The local send or receive file can no longer be accessed because, for example, it was deleted during an interruption of the openFT system.
80	64	FTR2080	Home directory no longer found.
81	128	FTR2081	The command was not executed (any further) executed. Not enough space.
82	64	FTR2082	File owner no longer known.
83	64	FTR2083	Request rejected. Pre-/postprocessing error.
84	64	FTR2084	Request rejected. An exit code for pre-/postprocessing is returned.
85	64	FTR2085	Request rejected. File password no longer valid.
86	64	FTR2086	File is now read only.
87	64	FTR2087	Request rejected. File structure error. Request ID is present as an insert in the SYSOUT message.
88	128	FTR2088	NDMS error. The request was rejected because the partner system currently does not have the resources available to accept requests.
89	64	FTR2089	The restart attempts were unsuccessful, for example, a pre-/postprocessing command could not be completed before the termination of openFT.
90	64	FTR2090	Error in file transfer completion. An error occurred during the final phase of the file transfer. If it was a long transfer, the recipient is advised to check if the file has still been transferred correctly. However, error follow-up processing will be started if it was specified.
2	0	FTR2091	Requests only partially completed; ’n’ of ’m’ files were transferred. In the case of a synchronous send request with wildcards, not all files were successfully transferred.
92	64	FTR2092	Access to 'file' no longer permissible. The command was not executed because either the send file or the receive file only permits certain access modes (e.g. read only) or because a directory was specified as either the source or destination of a file transfer.
93	128	FTR2093	FTAM error ’error_code’.
94	64	FTR2094	Retention period of file not yet expired.
95	64	FTR2095	Extension of file not possible for transparent transfer.
96	64	FTR2096	File structure not supported.
109	64	FTR2109	Connection setup rejected by local transport system.
110	64	FTR2110	Data integrity check indicates an error.
111	64	FTR2111	Encryption/data integrity check not possible. Encryption switched off.
112	64	FTR2112	Data integrity check not supported by partner.
113	64	FTR2113	Request rejected. User data encryption not possible for this request.
114	64	FTR2114	Identification of local system rejected by remote system.
115	64	FTR2115	Interrupted by remote system.
116	64	FTR2116	The local application is not defined in the transport system.
117	64	FTR2117	Local application not available.
118	64	FTR2118	Authentication of local system failed.
119	64	FTR2119	Local system unknown in remote system.
120	64	FTR2120	Remote system unknown.
121	64	FTR2121	Authentication of partner failed.
122	64	FTR2122	FT session rejected or disconnected. Reason ’error’.
123	64	FTR2123	OSS call error.
124	128	FTR2124	No free connection.
125	128	FTR2125	Request rejected. Connection lost.
126	64	FTR2126	Transport system error. Error code ’error_code’
127	128	FTR2127	No data traffic within ’n’ seconds.
129	64	FTR2129	No further files will be transferred.
140	64	FTR2140	Remote system: openFT is not authorized to execute requests for this user.
141	64	FTR2141	Remote system: Directory is not empty.
142	64	FTR2142	Remote system: File attributes do not match the request parameters.
143	64	FTR2143	Remote system: Attributes could not be modified.
144	64	FTR2144	Remote system: File/directory could not be created.
145	64	FTR2145	Remote system: CCS name unknown or not supported.
146	64	FTR2146	Remote system: Higher-level directory not found.
147	64	FTR2147	Remote system: File/directory already exists.
148	64	FTR2148	Remote system: Transfer of file generation groups not supported.
149	64	FTR2149	Remote system: Access error . DMS error, possibly the transfer ID. The FT system continues to run after output of the message
150	64	FTR2150	Request rejected. Remote system: Resulting file name too long.
151	128	FTR2151	Remote system: File locked to prevent multiple access.
152	64	FTR2152	Remote system: No file or directory name specified.
153	64	FTR2153	Remote system: Invalid management password.
154	128	FTR2154	Remote system: File/directory not available.
155	64	FTR2155	Remote system: File/directory not found. On deletion, the return code SC2=1 and SC1=0 is output, otherwise SC2=155 and SC1=64.
156	64	FTR2156	Remote system: Home directory not found.
157	64	FTR2157	Remote system: Renaming not possible.
158	128	FTR2158	The command was not executed (any further). Remote system: Not enough space.
159	64	FTR2159	Remote system: File owner unknown.
160	64	FTR2160	Remote system: Invalid file password.
161	64	FTR2161	Remote system: Retention period of file not yet expired.
162	64	FTR2162	Remote system: File/directory is read only.
163	64	FTR2163	Remote system: File structure not supported.
164	64	FTR2164	Request rejected. Remote system: Syntax error in resulting file name.
165	64	FTR2165	Remote system: Transparent file transfer not supported
166	64	FTR2166	Remote system: Extension of file not possible for transparent transfer.
167	64	FTR2167	Remote system: Access to denied.
168	64	FTR2168	Remote system: Follow-up processing exceeds length limit.
169	64	FTR2169	Request rejected. Remote system: Transfer admission invalid. Transfer admission incorrect or insufficient FTAC authorizations.
170	64	FTR2170	Request rejected. Remote system: Function not supported.
171	64	FTR2171	Remote system: Processing admission invalid.
172	128	FTR2172	Remote system: Request queue full.
174	64	FTR2174	No files corresponding to specified pattern found.
195	64	FTR2195	Remote system: openFT is not longer authorized to execute requests for this user.
196	64	FTR2196	The request has been canceled in the remote system.
197	64	FTR2197	Request rejected. Remote system: File/directory could not be created.
198	64	FTR2198	Remote system: Higher-level directory no longer found.
199	64	FTR2199	Remote system: I/O error, e.g. DMS error, possibly the transfer ID. The file was deleted during transfer.
200	128	FTR2200	Remote system: File now locked to prevent multiple access.
201	128	FTR2201	Request rejected. Remote system: File/directory no longer available.
202	64	FTR2202	Remote system: File/directory no longer found.
203	64	FTR2203	Remote system: Home directory no longer found.
204	128	FTR2204	The command was not executed (any further). Remote system: File/directory gets no more space.
205	64	FTR2205	Remote system: File owner no longer known.
206	64	FTR2206	Request rejected. Remote system: Pre-/postprocessing error.
207	64	FTR2207	Request rejected. Remote system: Exit code is returned during pre-/postprocessing.
208	64	FTR2208	Request rejected. Remote system: File password no longer valid.
209	64	FTR2209	Remote system: File/directory is now read only.
210	64	FTR2210	Request rejected. Remote system: File structure error.
211	128	FTR2211	Remote system: NDMS error.
212	64	FTR2212	Recovery failed.
213	128	FTR2213	Remote system: Resource bottleneck.
214	64	FTR2214	Remote system: Access to ’file’ is no longer permissible.
215	128	FTR2215	FTAM error.
216	64	FTR2216	Remote system: File structure not supported.
217	64	FTR2217	Remote system: Retention period of file not yet ex.
218	64	FTR2218	Remote system: Extension of file not possible for transparent transfer.
2	0	FTR2225	Information output canceled.
226	64	FTR2226	Job variable contents inconsistent.
227	64	FTR2227	Job variable not in use by openFT.
228	64	FTR2228	Job variable not found
SC1/2 = Subcodes 1/2 in decimal notation