Messages for administration commands and measurement data recording

20	openFT already started Meaning: openFT can only be started once in each instance. Measure: Terminate openFT if necessary.
21	Request must be canceled without FORCE option first Meaning: Before the FORCE option is used, the command must be called without the FORCE option. Measure: Issue the command without the FORCE option first.
29	Maximum number of key pairs exceeded Measure: Before a new key pair set can be created, an older key pair set must be deleted.
30	Warning: last key pair deleted Meaning: The last key pair set has been deleted. Without a key pair set, encrypted transfer, authentication and data integrity checking are not possible. Measure: Create a new key pair set.
31	No key pair available Meaning: All transfers are carried out without encryption. Measure: Create a new key pair set, if necessary.
32	Last key pair must not be deleted

33	The public key files could not be updated Meaning: The contents of the syspkf file could not be fully updated. Possible reasons: The syspkf file is locked. There is not enough disk space to allow the file to be created. Measure: Take the appropriate action depending on the cause of the error: Unlock the file. Allocate disk space or have your system administrator do it. Update the key with ftupdk.
34	Command only permissible for FT, FTAC or ADM administrator Meaning: Only the FT, FTAC or ADM administrator is permitted to use the command. Measure: Have the command executed by the FT, FTAC or ADM administrator.
35	Command only permissible for FT administrator Meaning: Only the FT administrator is permitted to use the command. Measure: Have the command executed by the FT administrator.
36	User not authorized for other user IDs Meaning: The user is not authorized to use a different user ID in the command. Measure: Specify your own ID, or have the command executed by the FT or FTAC administrator.
37	Key reference unknown Meaning: The specified key reference is unknown. Measure: Repeat the command with an existing key reference.
38	Request <Request id> is in the termination phase and can no longer be canceled

39	openFT not active Meaning: openFT is not started. Measure: Start openFT, if necessary.
40	Config user ID unknown or not enough space Meaning: The Config user ID of the current instance is unknown or the disk space allocated is insufficient to allow creation of the request file, the file for storing trace data, or the key files. Measure: Either create the Config user ID or increase its disk space allocation or have your system administrator do it.
41 42 43	Specified file is not a valid trace file openFT could not be started Partner with same attribute <attribute> already exists in partner list Meaning: There is already a partner entry with the same attribute <attribute> in the partner list. Measure: The attribute <attribute> in partner entries must be unique. Correct the command accordingly and try again.
44	Maximum number of partners exceeded Meaning: The partner list already contains the maximum permissible number of partner entries. Measure: Delete partners that are no longer required.
45	No partner found in partner list Meaning: A partner for the specified selection could not be found in the partner list. Measure: Check if the specified partner name or address was correct. If necessary, repeat the command using the correct name or address.

46	Modification of partner protocol type not possible Meaning: The protocol type of the partner entry cannot be changed subsequently. Measure: Delete the partner from the partner list, if necessary, and enter it again with a new protocol type.
47	Request <Request id> not found Meaning: The request with the transfer ID <Request id> could not be found. Measure: Specify the existing transfer ID and repeat the command.
48 49 57 58 59	Active requests could not yet be deleted CCS name ’<1>’ unknown Inbound requests cannot be modified The ADM trap server configuration is invalid monitoring is not active Meaning: The command is only supported if monitoring is activated. Measure: Ask the FT administrator to activate monitoring in the operating parameters and repeat the command.
60	File could not be created <2> Meaning: The command was not executed because the local file could not be created. Measure: Check the directory and access rights. Repeat the command.
61	Higher-level directory not found Meaning: The local file could not be created because the specified path does not exist. Measure: Create or correct the path for the file and repeat the command.

62	File already exists Meaning: The command was not executed because the specified file already exists. Measure: Either delete the existing file or choose a different name and repeat the command.
63	Resulting file name too long Meaning: The filename has the wrong syntax or is too long. Specifying a partially qualified filename may be the cause of the error. Measure: Repeat the command using the correct syntax.
64	File locked to prevent multiple access Meaning: The command was not executed because the file is already locked by another process. Measure: Repeat the command later.
65	File not found Meaning: The command was not executed because the specified file was not found. Measure: Correct the file name and repeat the command.
66	Not enough space for file Meaning: The command was not executed because the permitted storage space on the local volume is exhausted. Measure: Take appropriate measures depending on the cause of the error. Delete any files that are no longer required or Request the system administrator to assign more storage space.

67	Syntax error in resulting file name Meaning: The file cannot be accessed because the absolute file name has become too long, for instance. Measure: Shorten the path or the file name. Repeat the command.
68	Access to file denied<2> Meaning: The command was not executed because the file only permits certain access modes (e.g. read-only). Measure: Correct the file name or the file protection attributes. Repeat the command.
69	Error accessing file<2> Meaning: <2>: DMS error Measure: Take appropriate measures depending on the error code.
70	Configuration data invalid Meaning: The configuration data is syntactically or semantically incorrect and can therefore not be imported. Measure: Correct the error on the basis of the additional diagnostic output and then repeat import of the configuration data.
71	Import of configuration data not possible while remote administration server is started Meaning: The changes to the configuration data are so extensive that they can only be imported when the remote administration server has been terminated. Measure: Terminate openFT using the ftstop command and then attempt to import the configuration data again.
73	Command aborted Meaning: The user has cancelled the command.

74	Command only permissible for ADM administrator on a remote administration server Meaning: The command is only permitted for the ADM administrator. Measure: Have the ADM administrator execute the command if necessary.
77	Not possible to change transport system access. Cause: <1> Meaning: The operating mode with and without CMX could not be changed using the ftmodo command. Possible causes could be: openFT is started CMX not installed On Windows systems, the cause "CMX not installed" can also occur if PCMX is installed but the installed version of PCMX is too old. Please refer to the release notice for openFT (Windows) for information on the minimum required version of PCMX-32.
78	Interval too short since last log file change Meaning: Log file cannot be changed at present because the timestamp-dependent name part does not differ from the name part of the current log file. Measure: Wait for a short time and repeat the command (if necessary).