Example for the output of X.25 address parameters (Windows systems)
|
Example for the output of X.25 address parameters (Linux)
ftshwptn mchx25 -pa
NAME = mchx25
TYPE = X.25 [FarSync] ID = 0
DTE = 123456789012345
NSAP = 4300000000012345678901
AFI = 43
IDI = 123
DSP = 45678901
CUD = 03010100
CLASS = 2/2 WSIZE = 7 PSIZE = 4096
CUG = 9999 THPUTCL = 192000 REVCHRG = NO
IF = 0 SPARE-IF = 1,2
Explanation
NAME
Name of the partner list entry.
TYPE
Address type
X.25 [FarSync] X.25 address for the FarSync X.25 transport system.
TCP/IP IPv4 or IPv6 address for TCP/IP-RFC1006 transport system.
HOST/TNS Host or TNS name.
ID
Index of the address extension. Only used for diagnosis purposes.
DTE
DTE address of the partner system.
NSAP
NSAP address of the partner system. If the NSAP is specified as an OSI network address, then it is followed by the individual values for AFI, IDI and DSP.
AFI
Authority and format Identifier of the NSAP.
IDI
Initial domain identifier of the NSAP.
DSP
Domain-specific part of the NSAP.
CUD
User data for the X.25 connection setup.
CLASS
Transport protocol class.
WSIZE
Window size.
PSIZE
Packet size.
CUG
Closed user group.
THPUTCL
Throughput class.
REVCHRG
Reverse charging.
IF
Local line on the FarSync X.25 card that is used to set up the connection.
SPARE-IF
Alternative line and list with alternative lines on the FarSync X.25 card, via which a further connection setup is initiated as an alternative in case of a failed connection setup.