ACTIVATE-OWN-ADDRESS / AVOAD: Activate own address

You use ACTIVATE-OWN-ADDRESS to activate an own address to a (VLAN) line.

The alias name AVOAD exists for ACTIVATE-OWN-ADDRESS to provide SNMP support.

BS2000 console	BS2000-SDF command	Command/ SOF file	SNMP management	Parameter service
x	x	x	x

List of valid command sources

ACTIVATE-OWN-ADDRESS / AVOAD

ADDRESS = *IP(...) / *IPV6(...)
	*IP(...)
		|		IP-ADDRESS = <text 7 .. 15>
	*IPV6(...)
		|		IPV6-ADDRESS = <text 9 .. 45>

ADDRESS=...
own address which is to be activated.
Activation of the address is logged with message BCA0572 for lines and with BCA0573 for VLAN lines.

ADDRESS=*IP(...)
own IP address which is to be activated.

IP-ADDRESS=<text 7..15> / <x-string 7..8>
Under IP-ADDRESS you specify the own IP address which is to be activated.
Syntax of the own IP address: <IPv4-address>.

ADDRESS=*IPV6(...)
own IPv6 address which is to be activated.

IPV6-ADDRESS=<text 9..45> / <c-string 9..45>
Under IPV6-ADDRESS you specify the own IPv6 address which is to be activated.
Syntax of the own IPv6 address: <IPv6-address>.

Command logging

Activation of an own address is reported with message BCA0572 for lines and BCA0573 for VLAN lines.
If processing is successful it is acknowledged with News BCA0670, otherwise with News BCA06C0.
A description of the error messages that may be issued during command processing is provided in the table below. 

Command return codes

(SC2)      SC1	Maincode	Bedeutung
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Error in command
0        1	BCA0768	Syntax error in command
2        0	BCA06C0	Command aborted
0       64	BCA079F	Address unknown
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      128	BCA0766	BCAM is not active