ACTIVATE-VLAN-LINE / AVVLLN: Activate VLAN line

You use the ACTIVATE-VLAN-LINE command to activate a VLAN line.

The alias name AVVLLN exists for ACTIVATE-VLAN-LINE in order to provide SNMP support.

BS2000 console	BS2000 SDF command	Command/ SOF file	SNMP management	Parameter service
x	x	x	x

List of valid command sources

ACTIVATE-VLAN-LINE / AVVLLN                                                      

LINE-NAME = <composed-name 1..8>

,SLOW-POLL = *UNCHANGED / *ON / *OFF

LINE-NAME=<composed-name 1..8>
Name of the line that is to be activated.

SLOW-POLL=...
This operand specifies the SLOW-POLL behavior of the line.
SLOW-POLL=*ON results in automatic reactivation after line failure.

SLOW-POLL=*UNCHANGED
The SLOW-POLL setting of the line remains unchanged.

SLOW-POLL=*ON
SLOW-POLL is activated on the line.

SLOW-POLL=*OFF
SLOW-POLL is deactivated on the line.

Command logging

If processing is successful it is acknowledged with News BCA067B, otherwise with News BCA06CB.
A description of the error messages that may be issued during command processing is provided in the table below. 

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Error in command
2        0	BCA05BB	Link aggregation not active
2        0	BCA05DB	VLAN device not active
2        0	BCA06CB	VLAN line activation aborted
0        1	BCA0768	Syntax error in command
0       64	BCA07AA	VLAN line name not found
0       64	BCA0767	Command is being processed
0      128	BCA0760	A command is being executed for the line
0      128	BCA0814	BCAM is terminating abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active

Example

Activate VLAN line:

/ACTIVATE-VLAN-LINE LINE-NAME=L#VLAN#1