See also section "Local and remote IPv6, and IPv6 systems accessible via an IPv4 tunnel (LAN6#1)".
Setting options
/BCOPTION A-E-C=ON
/BCOPTION IPV6-AUTO-CONFIG=ON
Dynamic generation with BCIN commands
/BCIN LAN6#1,GEN=LOCAL,DEV=(LA00,LA01), -
/ PROFIL=(,(IPV6,IP),CSMACD),IPADR=6.1.0.1, -
/ LANADR=X'50C1D5000A00',ACT=NO
/BCIN L6#1#T01,GEN=NODE,ROUTE=LAN6#1,PROFIL=(TCP,IP), -
/ IPADR=6.1.0.2,ACT=NO
/BCIN L6#1#R22,GEN=REMOTE,TUNNEL-ROUTE=L6#1#T01,PROFIL=(TCP,IPV6), -
/ I6-ADDRESS='3FFE:1:1000:3000:52C1:D5FF:FE0D:0731',ACT=NO
Dynamic generation with CREATE commands
/CREATE-NODE NODE-NAME=LAN6#1
/CREATE-LINE LINE-NAME=LAN6#1, -
/ IP-ADDRESS=6.1.0.1, -
/ L2-PROTOCOL=*CSMACD(NODE-NAME=LAN6#1, -
/ WRITE-DEVICE=LA00,READ-DEVICE=LA01, -
/ LAN-ADDRESS=X'50C1D5000A00')
/CREATE-PROCESSOR PROCESSOR-NAME=L6#1#T01
/CREATE-ROUTE ROUTE-NAME=L6#1#T01, -
/ PATH=*NODE(NODE-NAME=LAN6#1, -
/ L3-PROTOCOL=*IP(IP-ADDRESS=6.1.0.2))
/CREATE-PROCESSOR PROCESSOR-NAME=L6#1#R22
/CREATE-ROUTE ROUTE-NAME=L6#1#R22, -
/ PATH=*VIA-TUNNEL(TUNNEL-ROUTE-NAME=L6#1#T01, -
/ L3-PROTOCOL=*IPV6( -
/ IPV6-ADDRESS='3FFE:1:1000:3000:52C1:D5FF:FE0D:0731'))
Entry in the processor file
L6#1#R01 IPV6 3FFE:1:1000:1000:52C1:D5FF:FE0E:2B01 L6#1#P11 IPV6 3FFE:1:1000:2000:52C1:D5FF:FE0C:080B L6#1#P02 IPV6 3FFE:1:1000:1000:52C1:D5FF:FE0E:2