BCIN: Initialize processor

BCIN on a processor

PROCESSOR = <processor-name 1 .. 8>
,INI = ONLY , ... / ALL, ... /
	ONLY, ...
		|		ACT = YES / NO / N / ONLY / ALL
		|		,CONFIGURATION = UPDATE / PRIMARY / NO
		|		,LINK-DOWN = KEEP-CONNECTION / DISCONNECT
	ALL, ...
		|		ACT = YES / NO / N / ONLY / ALL
		|		,CONFIGURATION = UPDATE / PRIMARY / NO
		|		,LINK-DOWN = KEEP-CONNECTION / DISCONNECT

PROCESSOR=<processor-name 1..8>
Name of the processor

INI=...
Specifies which objects are to be initiated in addition to the processor.

INI=ONLY,...
The operation is only performed for the specified processor.

INI=ALL
The operation is performed for all accessible objects.
INI=ALL is not valid for processors defined in the RDF, but without name specification.

ACT=...
Specifies which objects are to be activated.

ACT=YES
Only those objects which are defined by INI are activated.

ACT=NO / N
No activations whatsoever take place.

ACT=ONLY
Only the processor is activated.

ACT=ALL
Activation takes place for the specified processor and for all running processors that can be reached via that processor.
ACT=ALL is not valid for processors that have been defined in the RDF, but without name specifications.

CONFIGURATION=...
The operand specifies whether or not the network configuration for the processor can be modified using the routing protocol function. Specification is only possible for processors to which routes with the L3 profile IP, IPv6 or INTF exist.

CONFIGURATION=UPDATE
Route modifications resulting from routing protocol functions lead to modifications to the BCAM routing tables and remain effective for this BCAM session.

CONFIGURATION=PRIMARY
Route modifications resulting from routing protocol functions are to be canceled. The original configuration information is used again.

CONFIGURATION=NO
Route modifications resulting from routing protocol functions are not permitted.

LINK-DOWN=...
The operand specifies whether or not the transport connections assigned to the route are shut down in the event of a route failure.

LINK-DOWN=KEEP-CONNECTION
In the event of a route failure, the transport connections assigned to this route are not shut down.

LINK-DOWN=DISCONNECT
In the event of a route failure, all transport connections assigned to this route are shut down.

Command logging

For reasons of compatibility, positive acknowledgments are supplied in news BCA0763, and negative acknowledgments in news BCA0762, followed by the message NBR0740. In addition, for positive acknowledgments, the messages BCA083F and BCA0620 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
2        0	BCA0621	Startup aborted
2        0	BCA0777	DMS-GETKY interface used for RDF
0        1	BCA0768	Syntax error in command
0        1	BCA077A	Definition of the route to computer invalid
0       64	BCA08E5	Object is unknown
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active