BCIN: Initialize route

You use a BCIN command for a route to start a route and the associated processor.

BCIN to a route

ROUTE = <rout-name 1 .. 8>

,ACT = YES / NO

,CONFIGURATION = UPDATE / PRIMARY / NO

,LINK-DOWN = KEEP-CONNECTION / DISCONNECT

ROUTE=<rout-name 1..8>
Name of the route

ACT=...
Specifies which objects are activated.

ACT=YES
The route and its processor are activated.

ACT=NO
No activations whatsoever take place.

CONFIGURATION=...
The operand specifies whether or not the network configuration for the processor is to be modified using the routing protocol function. The specification is only possible for the processor to which routes with the L3 profile IP, IPv6 or INTF exist.

CONFIGURATION=UPDATE
Route modifications resulting from routing protocol functions lead to modifications to the BCAM routing tables and remain effective for this BCAM session.

CONFIGURATION=PRIMARY
Route modifications resulting from routing protocol functions are to be canceled. The original configuration information is used again.

CONFIGURATION=NO
Route modifications resulting from routing protocol functions are not permitted.

LINK-DOWN=...
The operand specifies whether or not the transport connections assigned to the route are shut down in the event of a route failure.

LINK-DOWN=KEEP-CONNECTION
In the event of a route failure, the transport connections assigned to this route are not shut down.

LINK-DOWN=DISCONNECT
In the event of a route failure, all transport connections assigned to this route are shut down. 

Command logging

For reasons of compatibility, positive acknowledgments are supplied in news BCA0763, and negative acknowledgments in news BCA0762, followed by the message NBR0740. In addition, for positive acknowledgments, the messages BCA083F, BCA083E and BCA0620 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
2        0	BCA0621	Startup aborted
2        0	BCA0777	DMS-GETKY interface used for RDF
0        1	BCA0768	Syntax error in command
0        1	BCA077A	Definition of the route to computer invalid
0       64	BCA08E5	Object is unknown
0       64	BCA0998	Configuration error at device ... of the line ...
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active