BCSET Change trace length | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
TRACE=(LENGTH=(...))
The trace lengths are changed.
LENGTH=(...)
The maximum lengths for data to be traced are changed.
LENGTH=(PORT,...)
The action is executed for the port trace identified with LINE. If LINE is not specified, the action is executed for all ports.
I=<integer 1..3840>
Trace lengths to be set for input.
Default: 132
O=<integer 1..3840>
Trace lengths to be set for output.
Default: 132
LINE=...
LINE specifies the port traces (DCM.BCAM.PORT.<line-name> or DCM.PORT.V-PORT.<line-name>) for which the maximum length is changed.
LINE= *all
The maximum length is changed for all port traces.
LINE=<line-name 1..8>
Identifies the selected port trace.
LENGTH=(TRANS,...)
The action is executed for the traces DCM.BCAM.TRANS, DCM.BCAM.LOC, and DCM.BCAM.LOOPBACK.
I=<integer 1..3840>
Trace length to be set for input.
Default: 64
O=<integer 1..3840>
Trace length to be set for output.
Default: 64
LENGTH=(VLAN-DEVICE,...)
The action is executed for the port trace defined with DEVICE. If DEVICE is not specified, the action is executed for all ports.
I=<integer 1..3840>
Trace length to be set for input.
Default: 132
O=<integer 1..3840>
Trace length to be set for output.
Default: 132
DEVICE=...
DEVICE specifies the port traces (DCM.BCAM.G-PORT.<device-name>) for which the maximum length is changed.
DEVICE= *all
The maximum length is changed for all port traces.
DEVICE=<device-name 1..8>
Identifies the selected port trace.
LENGTH=(VLAN-LINE,...)
The action is executed for the port trace defined with LINE. If LINE is not specified, the action is executed for all ports.
I=<integer 1..3840>
Trace length to be set for input.
Default: 132
O=<integer 1..3840>
Trace length to be set for output.
Default: 132
LINE=...
LINE specifies the port traces (DCM.BCAM.V-PORT.<line-name>) for which the maximum length is changed.
LINE= *all
The maximum length is changed for all port traces.
LINE=<line-name 1..8>
Identifies the selected port trace.