You use the MODIFY-VLAN-LINE command to modify options and/or attributes of a VLAN line dynamically.
The alias name MDVLLN exists for the MODIFY-VLAN-LINE command in order to provide SNMP support.
BS2000 console | BS2000 SDF command | Command/SOF file | SNMP management | Parameter service |
x | x | x |
List of valid command sources
MODIFY-VLAN-LINE / MDVLLN | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
LINE-NAME=<composed-name 1..8>
Current name of the line that is to be modified.
NEW-LINE-NAME=...
New name of the VLAN line.
The line-name can only be changed if the line is deactivated.
NEW-LINE-NAME=*SAME
The name of the VLAN line remains unchanged.
NEW-LINE-NAME=<composed-name 1..8>
New name of the VLAN line.
SLOW-POLL=...
The SLOW-POLL option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
SLOW-POLL=*UNCHANGED
The setting for the SLOW-POLL option remains unchanged.
SLOW-POLL=*ON
The SLOW-POLL option is activated.
SLOW-POLL=*OFF
The SLOW-POLL option is deactivated.
BROADCAST=...
The BROADCAST option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
BROADCAST=*UNCHANGED
The setting for the BROADCAST option remains unchanged.
BROADCAST=*ON
The BROADCAST option is activated.
BROADCAST=*OFF
The BROADCAST option is deactivated.
MULTICAST=...
The MULTICAST option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
MULTICAST=*UNCHANGED
The setting for the MULTICAST option remains unchanged.
MULTICAST=*ON
The MULTICAST option is activated.
MULTICAST=*OFF
The MULTICAST option is deactivated.
AUTO-ROUTE-SWITCHING=...
The AUTO-ROUTE-SWITCHING option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
AUTO-ROUTE-SWITCHING=*UNCHANGED
The setting for the AUTO-ROUTE-SWITCHING option remains unchanged.
AUTO-ROUTE-SWITCHING=*ON
The AUTO-ROUTE-SWITCHING option is activated.
AUTO-ROUTE-SWITCHING=*OFF
The AUTO-ROUTE-SWITCHING option is deactivated.
ROUTE-RESWITCHING=...
The ROUTE-RESWITCHING option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
ROUTE-RESWITCHING=*UNCHANGED
The setting for the ROUTE-RESWITCHING option remains unchanged.
ROUTE-RESWITCHING=*ON
The ROUTE-RESWITCHING option is activated.
ROUTE-RESWITCHING=*OFF
The ROUTE-RESWITCHING option is deactivated.
IPV6-VLAN-AUTO-CONF=...
The IPV6-VLAN-AUTO-CONF option is modified.
You cannot change this option unless the LAN protocol CSMACD is running on the line.
IPV6-VLAN-AUTO-CONF=*UNCHANGED
The setting for the IPV6-VLAN-AUTO-CONF option remains unchanged.
IPV6-VLAN-AUTO-CONF=*ON
The IPV6-VLAN-AUTO-CONF option is activated.
IPV6-VLAN-AUTO-CONF=*OFF
The IPV6-VLAN-AUTO-CONF option is deactivated.
DUP-ADDR-DETECTION=...
This parameter is used to set Duplicate Address Detection on a line-specific basis.Comment:
If the VLAN line is in a redundant relationship with other VLAN lines, the settings for Duplicate Address Detection for IPv6 are also adjusted accordingly for these VLAN lines.
DUP-ADDR-DETECTION= * UNCHANGED
The previous setting remains unchanged.
Default: Duplicate Address Detection is performed, and the Transmit number is set to 1.
DUP-ADDR-DETECTION=*ON(...)
Duplicate Address Detection is performed.
TRANSMIT-NUMBER=<integer 1..10>
The number of Transmits is set.
TRANSMIT-NUMBER=*STD
The number of Transmits is set to the default value 1.
DUP-ADDR-DETECTION=*OFF
Duplicate Address Detection is not performed.
DUP-ADDR-DETECTION=*STD
Duplicate Address Detection is performed using the default setting.
ADDR-CONFLICT-DETECT=...
This parameter is used to set IP Address Conflict Detection on a line-specific basis.Comment:
If the VLAN line is in a redundant relationship with other VLAN lines, the settings for Duplicate Address Detection for IP are also adjusted accordingly for these VLAN lines.
ADDR-CONFLICT-DETECT= * UNCHANGED
The current setting is not changed.
Default: IP Address Conflict Detection is performed and the transmit number is 3.
ADDR-CONFLICT-DETECT=*ON(...)
IP Address Conflict Detection is performed.
TRANSMIT-NUMBER=<integer 1..10>
The number of transmits is set.
TRANSMIT-NUMBER=*STD
The number of transmits is set to the default value 3.
ADDR-CONFLICT-DETECT=*OFF
IP Address Conflict Detection is not performed.
ADDR-CONFLICT-DETECT=*STD
IP Address Conflict Detection is performed with the default setting.
TIMEOUT-PROCESSING=...
Specifies whether a VLAN line is maintained or deactivated following a timeout on this line when line supervision is active (LINE-SUPERVISION in the BCOPTION / MODIFY-BCAM-OPTIONS command).
You cannot change this option unless the LAN protocol CSMACD is running on the line.
TIMEOUT-PROCESSING=*UNCHANGED
The setting for the TIMEOUT-PROCESSING option remains unchanged.
Default: *KEEP-LINE
TIMEOUT-PROCESSING=*KEEP-LINE
The VLAN line is maintained in the event of a timeout if line supervision is set.
TIMEOUT-PROCESSING=*DEACTIVATE-LINE
The VLAN line is deactivated in the event of a timeout if line supervision is set.
MAX-LPDU-SIZE=...
The MAX-LPDU-SIZE attribute is modified.
A prerequisite for modifying MAX-LPDU-SIZE is that the L2 profile ETHERNET is used on the line. The MAX-LPDU-SIZE value is limited by the maximum size specified by the VLAN device.
The MAX-LPDU-SIZE can be modified only when the VLAN line is deactivated.
MAX-LPDU-SIZE=*UNCHANGED
The MAX-LPDU-SIZE attribute remains unchanged.
MAX-LPDU-SIZE=*STD
The LPDU length is modified to the ETHERNET value (1514 bytes).
MAX-LPDU-SIZE=*BY-DEVICE
The LPDU length is modified to the value read by the device.
MAX-LPDU-SIZE=<integer 1514..65535>
The LPDU length is modified to the value specified (in bytes).
Command logging
If processing is successful the message BCA0669 appears, if it is negative the message BCA06B9. If processing is positive the messages BCA07D0, BCA07D1, BCA07D6 and BCA07D7 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.
Command return codes
(SC2) | Maincode | Meaning |
| CMD0001 | Command successfully processed |
| CMD0202 | Error in command |
| BCA0768 | Syntax error in command |
| BCA05E5 | VLAN line not deactivated |
| BCA06B9 | MODIFY-VLAN-LINE command aborted |
| BCA07AA | VLAN line name not found |
| BCA07E2 | NEW-LINE-NAME already exists |
| BCA0814 | BCAM is being terminated abnormally |
| BCA0816 | BCAM is terminating |
| BCA0766 | BCAM is not active |
Example
Modify VLAN line option
/MODIFY-VLAN-LINE LINE-NAME=L#VLAN#1,SLOW-POLL=*ON