The BCAM SHOW functions of the BCAM-CMD subsystem enable a number of BCAM tables to be read out and used to create a BCAM configuration file.
Command | Function |
SHOW-ADDRESS-ASSIGNMENT | BCAM gateway tables |
SHOW-AEC-OPTIONS | AEC settings |
SHOW-BCAM-IP-RANGE | IP range tables |
SHOW-BCAM-OPTIONS | BCAM options |
SHOW-BCAM-PARAMETERS | BCAM start parameters |
SHOW-BCAM-SERVER-PORTS | Server port settings |
SHOW-BCAM-START-PARAMETER | BCAM start parameter settings |
SHOW-BCAM-TIMER | BCAM timer settings |
SHOW-DNS-ACCESS | Table of the DNS settings |
SHOW-HOST-ATTRIBUTES | Host information |
SHOW-LINE-ATTRIBUTES | Line information |
SHOW-LINK-AGGREGATION-ATTR | Information for link aggregation |
SHOW-MAPPING-ENTRIES | Mapping entries |
SHOW-MAPPING-STATUS | Mapping status information, size setting |
SHOW-NODE-ATTRIBUTES | Nodes |
SHOW-PROCESSOR-ATTRIBUTES | Processors |
SHOW-ROUTE-ATTRIBUTES | Routes |
SHOW-VLAN-ASSIGNMENT | VLAN assignment settings |
SHOW-VLAN-DEVICE-ATTRIBUTES | VLAN devices |
SHOW-VLAN-LINE-ATTRIBUTES | VLAN lines |
Resources for generating configuration files
In addition, the BCAM settings and possible monitoring and trace settings must be prepared. In functional terms these settings have little effect on normal BCAM operation and are thus ignored.
Command | Evaluation function |
BCMON | “SHOW-BCAM-MONITORING” |
BCSET | “SHOW-BCAM-SETTING” |
DCDIAG | Change trace settings (no SDF command) |
Remaining resources for future configuration file generation