SHOW-AEC-OPTIONS / SHAECO: Show information on automatic end system creation

You use the SHOW-AEC-OPTIONS command to output information about automatic end system creation (AEC).

The alias name SHAECO exists as an SDF alias for SHOW-AEC-OPTIONS.

BS2000 console	BS2000 SDF command	Command/SOF file	SNMP management	Parameter service
	x

List of valid command sources

SHOW-AEC-OPTIONS / SHAECO

INFORMATION = *ALL / list-poss (3): *IP / *IPV6 / *ISO

,OUTPUT = *SYSOUT / *SYSLST

,OUTPUT-FORMAT = *STD / *GENERATING-CMD

INFORMATION=...
Specifies which AEC options are to be displayed.

INFORMATION=*ALL
All AEC options are displayed.

INFORMATION=*IP
IP-specific AEC options are displayed.

INFORMATION=*IPV6
IPv6-specific AEC options are displayed.

INFORMATION=*ISO
ISO-specific AEC options are displayed.

OUTPUT=...
Defines the output medium.

OUTPUT=*SYSOUT
Output takes place to SYSOUT.

OUTPUT=*SYSLST
Output takes place to SYSLST.

OUTPUT-FORMAT=...
Defines the output format.

OUTPUT-FORMAT=*STD
Standard output format.

OUTPUT-FORMAT=*GENERATING-CMD
The output format corresponds to the generating commands. 

Command logging

A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Operand error
0       32	CMD0221	System error
0       64	CMD0216	Privilege not sufficient
0       64	BCA0203	Interface (&00) returns RC (&01)

Examples

Show all BCAM AEC options:

/SHOW-AEC-OPTIONS INFORMATION=*ALL

Show BCAM AEC options for IP:

/SHOW-AEC-OPTIONS INFORMATION=*IP

S variables

The command’s INFORMATION operand defines the S variables to which values are assigned. Possible values for INFORMATION are *ALL, *IP, *IPV6, and *ISO (in the table the values printed in bold are used).

Output information	Name of the S variable	Data type	Content	Condition
AEC because of IP incoming data	var(*LIST).IP.IN-DATA	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP outgoing data	var(*LIST).IP.OUT-DATA	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP routing data	var(*LIST).IP.ROUT-DATA	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP routing protocol	var(*LIST).IP.ROUT-PROTOCOL	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP incoming broadcast	var(*LIST).IP.IN-BROADCAST	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP incoming multicast	var(*LIST).IP.IN-MULTICAST	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IP SNMP	var(*LIST).IP.SNMP	string	*ON *OFF	INF=*ALL/*IP O-F=*STD
AEC because of IPv6 incoming data	var(*LIST).IPV6.IN-DATA	string	*ON *OFF	INF=*ALL/*IPV6 O-F=*STD
AEC because of IPv6 outgoing data	var(*LIST).IPV6.OUT-DATA	string	*ON *OFF	INF=*ALL/*IPV6 O-F=*STD
AEC because of IPv6 routing protocol	var(*LIST).IPV6.ROUT-PROTOCOL	string	*ON *OFF	INF=*ALL/*IPV6 O-F=*STD
AEC because of IPv6 incoming multicast	var(*LIST).IPV6.IN-MULTICAST	string	*ON *OFF	INF=*ALL/*IPV6 O-F=*STD
AEC because of ISO incoming data	var(*LIST).ISO.IN-DATA	string	*ON *OFF	INF=*ALL/*ISO O-F=*STD
AEC because of ISO outgoing data	var(*LIST).ISO.OUT-DATA	string	*ON *OFF	INF=*ALL/*ISO O-F=*STD
AEC because of ISO routing data	var(*LIST).ISO.ROUT-DATA	string	*ON *OFF	INF=*ALL/*ISO O-F=*STD
AEC because of ISO routing protocol	var(*LIST).ISO.ROUT-PROTOCOL	string	*ON *OFF	INF=*ALL/*ISO O-F=*STD
Generating command	var(*LIST).GENERATING-CMD(*LIST)	string	<text 1..256>	INF=<any> O-F=*GEN