SHOW-HOST / SHHT: Show host information

You use the SHOW-HOST command to output information on hosts.

The alias SHHT exists for SHOW-HOST.

BS2000 console	BS2000 SDF command	Command/SOF file	SNMP management	Parameter service
x	x

List of valid command sources

SHOW-HOST / SHHT                                                                                                    

HOST-NAME = *ALL / <composed-name 1..8> / <c-string 1 .. 8>

HOST-NAME=...
Name of the host for which information is output.
The information is displayed by means of console message BCA08E0.

HOST-NAME=*ALL
Information on all hosts is output.

HOST-NAME=<composed-name 1..8> / <c-string 1..8>
Name of the host for which information is output.

Command logging

Positive acknowledgments are supplied in news BCA0720, and negative acknowledgments in news BCA0728, followed by the message NBR0740. In addition, for positive acknowledgments, the message BCA08E0 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Error in command
0        1	BCA0768	Syntax error in command
0       64	BCA07A4	Host not found
0       64	BCA08EF	Nothing found to show
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active

Example

Show host or hosts:

/SHOW-HOST

Equivalent BCSHOW command:

/BCSHOW SHOW=HOST