SHOW-NODE / SHND: Show LAN node information

You use the SHOW-NODE command to output information for a LAN node of a different LAN type (*NORMAL, *VIRTUAL).

The alias SHND exists for SHOW-NODE.

BS2000 console	BS2000 SDF command	Command/ SOF file	SNMP management	Parameter service
x	x

List of valid command sources

SHOW-NODE / SHND

NODE-NAME = *ALL / <composed-name 1..8> / <c-string 1 .. 8>

NODE-NAME=...
Name of the LAN node for which the information is output.
The information is displayed by means of the console messages BCA08CB, BCA08EC and BCA08EB.

NODE-NAME=*ALL
Information is output for all LAN nodes.

NODE-NAME=<composed-name 1..8> / <c-string 1..8>
Name of the LAN node for which the information is output.

Command logging

Positive acknowledgments are supplied in news BCA0720, and negative acknowledgments in news BCA0728, followed by the message NBR0740. In addition, for positive acknowledgments, the messages BCA0EBC, BCA08EC and BCA08EB may appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Error in command
0        1	BCA0768	Syntax error in command
0       64	BCA07A3	LAN node not found
0       64	BCA08EF	Nothing found to show
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active

Example

/SHOW-NODE

Equivalent BCSHOW command

/BCSHOW SHOW=NODE