SHOW-OWN-ADDRESS shows the local addresses for a line / VLAN line.
The alias name SHOAD exists for SHOW-OWN-ADDRESS in order to provide SNMP support.
BS2000 console | BS2000 SDF command | Command/ SOF file | SNMP management | Parameter service |
x | x | x | x |
List of valid command sources
SHOW-OWN-ADDRESS / SHOAD |
LINE-NAME = *ALL / <composed-name 1..8> ,HOST-NAME = *STD / *ALL / <composed-name 1 .. 32> ADDRESS-TYPE = *ALL / list-poss (4): *IP / *IPV6 / *ISO / *NEA / *LAN ,ADDRESS-STATE = *ANY / list-poss (4): *TENTATIVE / *VALID / *INVALID/ *DUPLICATE |
LINE-NAME=
Name of the line / VLAN line for which the local addresses are displayed.
LINE-NAME=*ALL
The local addresses are to be displayed for all lines / VLAN lines.
LINE-NAME=<composed-name 1..32>
Name of the line / VLAN line
HOST-NAME=...
You use HOST-NAME to specify the name of the host for which the local addresses are to be displayed.
HOST-NAME=*STD
The name of the standard host is used as the host name (host name from the DCSTART or DCOPT command).
HOST-NAME=*ALL
The names of all hosts are selected to which the line/VLAN line is connected.
HOST-NAME=<composed-name 1..8>
Name of the host to which the line / VLAN line is connected.
ADDRESS-TYPE=...
You use ADDRESS-TYPE to specify which local addresses of the line / VLAN line are to be displayed. The output information is created with message BCA057E for lines and with BCA057F for VLAN lines.
ADDRESS-TYPE=*ALL
The local addresses of all address types are displayed.
ADDRESS-TYPE=*IP
Local IP addresses of the line / VLAN line are to be displayed.
ADDRESS-TYPE=*IPV6
Local IPv6 addresses of the line / VLAN line are to be displayed.
ADDRESS-TYPE=*ISO
Local ISO addresses of the line / VLAN line are to be displayed.
ADDRESS-TYPE=*LAN
Local LAN addresses of the line / VLAN line are to be displayed.
ADDRESS-STATE=...
Specifies which own addresses of the line/VLAN line selected according to the address status are displayed. The output information is created with the message BCA057E for lines or BCA057F for VLAN lines.
ADDRESS-STATE=*ANY
The own addresses with any address status are displayed.
ADDRESS-STATE=*TENTATIVE
Own addresses of the line/VLAN line whose address status is checked are to be displayed.
ADDRESS-STATUS=*VALID
Own addresses of the line/VLAN line which are valid are to be displayed.
ADDRESS-STATUS=*INVALID
Own addresses of the line/VLAN line which are already known at another place in the network are to be displayed.
ADDRESS-STATUS=*DUPLICATE
Own addresses of the (VLAN) line are displayed which are already known elsewhere in the network and have been recognized as duplicates and are therefore not used.
Command logging
Positive acknowledgments are supplied in news BCA065A, and negative acknowledgments in news BCA06AA.
A description of the error messages that may be issued during command processing is provided in the table below.
Command return codes
(SC2) | Maincode | Meaning |
| CMD0001 | Command successfully processed |
| CMD0202 | Error in command |
| BCA06AA | Command aborted |
| BCA0768 | Syntax error in command |
| BCA0770 | Parameter error |
| BCA07A2 | LINE-NAME is not known |
| BCA07A4 | HOST-NAME is not known |
| BCA0814 | BCAM is being terminated abnormally |
| BCA0816 | BCAM is terminating |
| BCA0766 | BCAM is not active |