SHOW-VLAN-LINE / SHVLLN: Show VLAN lines

You use the SHOW-VLAN-LINE command to show the line-specific options and attributes.

The alias name SHVLLN exists for SHOW-VLAN-LINE in order to provide SNMP support.

BS2000 console	BS2000 SDF command	Command/SOF file	SNMP management	Parameter service
x	x		x

List of valid command sources

SHOW-VLAN-LINE / SHVLLN

LINE-NAME = *ALL / <composed-name 1 .. 8> / *VIA-NODE(... ) / *VIA-DEVICE(... ) /
*VIA-AGGREGATION(...)
	*VIA-NODE(...)
		|		NODE-NAME = <composed-name 1 .. 8>
	*VIA-DEVICE(...)
		|		DEVICE-NAME = <composed-name 1 .. 8>
	*VIA-AGGREGATION(...)
		|		AGGREGATION-NAME = <composed-name 1 .. 8>
,INFORMATION = *STATE / *ALL /
list-poss (16): *BROADCAST / *MULTICAST / *SLOW-POLL / *MAX-LPDU-SIZE /
*MAX-LPDU-VALUE / *AUTO-ROUTE-SWITCHING / *ROUTE-RESWITCHING / *STATE/
*REDUNDANCY / *TIMEOUT-PROCESSING / *VLAN / *DUP-ADDR-DETECTION /
*ADDR-CONFLICT-DETECT / *OFFLOAD / *IPV6-VLAN-AUTO-CONF

LINE-NAME=...
With LINE-NAME you specify the lines for which information is shown.

LINE-NAME=*ALL
Information is shown for all lines.

LINE-NAME=<composed-name 1..8>
Name of the line for which information is shown.

LINE-NAME=*VIA-NODE(...)
Information about the VLAN lines which are determined by specifying a node.

NODE-NAME=<composed-name 1..8>
Name of the node about whose lines information is to be shown.

LINE-NAME=*VIA-DEVICE(...)
Information about the VLAN lines which are determined by specifying a VLAN device name.

DEVICE-NAME=<composed-name 1..8>
Name of the VLAN device for which information about its VLAN lines is to be shown.

LINE-NAME=*VIA-AGGREGATION(...)
Information on the VLAN lines which are determined by specifying a link aggregation name.

AGGREGATION-NAME=<composed-name 1..8>
Name of the link aggregation about whose VLAN lines information is to be shown.

INFORMATION=...
With INFORMATION you specify which information is shown.

INFORMATION=*STATE
The status of the line is shown.
The information is shown with the console messages BCA05E3, BCA05E9, and BCA05EA.

INFORMATION=*ALL
All information for the line is shown.

INFORMATION=*BROADCAST
The line-specific BROADCAST option is shown.
This option cannot be shown unless the LAN protocol CSMACD is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*MULTICAST
The line-specific MULTICAST option is shown.
This option cannot be shown unless the LAN protocol CSMACD is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*SLOW-POLL
The line-specific SLOW-POLL option is shown.
This option cannot be shown unless the LAN protocol CSMACD is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*OFFLOAD
The value set for (TCP-)OFFLOAD processing is shown.
The information on (TCP-)OFFLOAD is shown with the console message BCA0565.

INFORMATION=*MAX-LPDU-SIZE
The line-specific MAX-LPDU-SIZE attribute is shown.
The information is shown with the console message BCA05E2.

INFORMATION=*MAX-LPDU-VALUE
The line-specific current MAX-LPDU value is shown.
The information is shown with the console message BCA0561.

INFORMATION=*AUTO-ROUTE-SWITCHING
The line-specific AUTO-ROUTE-SWITCHING option is shown.
This option cannot be shown unless the LAN protocol CSMACD is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*ROUTE-RESWITCHING
The line-specific ROUTE-RESWITCHING option is shown.
This option cannot be shown unless the LAN protocol CSMACD is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*TIMEOUT-PROCESSING
The line-specific TIMEOUT-PROCESSING behavior is shown.
This option cannot be shown unless a LAN protocol (CSMACD) is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*REDUNDANCY
Information about redundancy is displayed.
A prerequisite for the display of this information is that LAN protocol CSMACD is used on the line.
The information is displayed using console message BCA05E8.

INFORMATION=*VLAN
The VLAN ID that is used on the line is shown.
The information is shown with the console message BCA05E2.

INFORMATION=*DUP-ADDR-DETECTION
Duplicate Address Detection for IPv6 is shown.
A prerequisite for displaying the behavior is that a LAN protocol (CSMACD) is used on the line.
The information is shown with the console message BCA05E2.

INFORMATION=*ADDR-CONFLICT-DETECT
Address Conflict Detection for IP is shown.
This behavior can only be displayed if a LAN protocol is used on the line (CSMACD).
The information is displayed by means of console message BCA05E2.

INFORMATION=*IPV6-VLAN-AUTO-CONF
The IPv6 autoconfiguration for VLAN lines is shown.
The information is shown with the console message BCA05E2.

Command logging

Positive acknowledgments are supplied in news BCA0659, and negative acknowledgments in news BCA06A9. In addition, for positive acknowledgments, the messages BCA05E2 BCA05E3, BCA05E9, and BCA05EA may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
0        1	CMD0202	Error in command
2        0	BCA06A9	SHOW-VLAN-LINE command aborted
0        1	BCA0768	Syntax error in command
0       64	BCA07AA	VLAN line name not found
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active

Example 

Show VLAN line

/SHOW-VLAN- LINE LINE-NAME=L#VLAN#1,INFORMATION=(SLOW-POLL,STATE)