You use the ACTIVATE-VLAN-DEVICE command to activate a VLAN device.
The alias name AVVLDV exists for ACTIVATE-VLAN-DEVICE in order to provide SNMP support.
BS2000 console | BS2000 SDF command | Command/ SOF file | SNMP management | Parameter service |
x | x | x | x |
List of valid command sources
ACTIVATE-VLAN-DEVICE / AVVLDV |
DEVICE-NAME = <composed-name 1..8> ,SLOW-POLL = *UNCHANGED / *ON / *OFF |
DEVICE-NAME=<composed-name 1..8>
Name of the VLAN device that is to be activated.
SLOW-POLL=...
This operand specifies the SLOW-POLL behavior of the device.
SLOW-POLL=*ON results in automatic reactivation after device failure.
SLOW-POLL=*UNCHANGED
The SLOW-POLL setting of the device remains unchanged.
SLOW-POLL=*ON
SLOW-POLL is activated on the device.
SLOW-POLL=*OFF
SLOW-POLL is deactivated on the device.
Command logging
If processing is successful it is acknowledged with News BCA067D, otherwise with News BCA06CD.
A description of the error messages that may be issued during command processing is provided in the table below.
Command return codes
(SC2) | Maincode | Meaning |
| CMD0001 | Command successfully processed |
| CMD0202 | Error in command |
| BCA05BB | Link aggregation not active |
| BCA06CD | VLAN line activation aborted |
| BCA0768 | Syntax error in command |
| BCA07A5 | VLAN device unknown |
| BCA0767 | Command is being processed |
| BCA0760 | A command is being executed for the device |
| BCA0814 | BCAM is terminating abnormally |
| BCA0816 | BCAM is terminating |
| BCA0766 | BCAM is not active |
Example
Activate VLAN device:
/ACTIVATE-VLAN-DEVICE DEVICE-NAME=L#DEV#1