You use this command to output information on the DCMTRACE function and/or one or more traces.
TRACE / TRC |
[ *ALL ] [ <trace-name> ] [ list-poss(24): TRACE ] [ PORT ] [ A-PORT ] [ G-PORT ] [ V-PORT ] [ NET ] [ ADM ] [ BASIC ] [ BUF ] [ BCAM ] [ TRANS[PORT] ] [ REM ] [ LOC ]] [ CON[HAND] ] [ MAP ] [ MGMT ] [ INFO ] [ SM2 ] [ SNMP ] [ FILE ] [ IPSEC ] [ COM-IPSEC ] [ INTERFACE ] [ LOOPBACK ] [ EXIT ] [ TSAP ] [ CRYPT-COM ] [ CRYPT-PORT ] [ ONETSTOR ] [ TIAM ] [ VTSU-B ] [ , INFO = *DISPLAY / *SAVING-FILE ] |
*ALL
All control blocks of the DCMTRACE function and all traces are to be output.
<trace-name>
The trace entry and trace buffer for the trace called <trace-name> are to be output.
The name may be fully qualified (e.g. “DCM.BCAM.CON”) or partially qualified (e.g. “DCM.BCAM.PORT.”).
TRACE
The trace entry and trace buffer for the internal trace of the DCMTRACE function are to be output.
(Trace name: $TRACE).
PORT
The trace entry and trace buffer for all port traces are to be output.
(Trace name: DCM.BCAM.PORT.<line-name>).
A-PORT
The trace entry and the trace buffers for the BCAM A-PORT-specific traces are to be output.
(Trace name: DCM.BCAM.A-PORT.<aggregation-name>).
G-PORT
The trace entry and the trace buffers for the BCAM-G-PORT-specific traces are to be output.
(Trace name: DCM.BCAM.G-PORT.<device-name>).
V-PORT
The trace entry and the trace buffers for the BCAM-V-PORT-specific traces are to be output.
(Trace name: DCM.BCAM.PORT.V.<vlan-line-name>).
NET
The trace entry and trace buffer for the network trace are to be output.
(Trace name: DCM.BCAM.NET).
ADM
The trace entry and trace buffer for the ADM trace are to be output.
(Trace name: DCM.BCAM.ADM).
BASIC
The trace entry and trace buffer for the transport basis trace are to be output.
(Trace name: DCM.BCAM.BASIC).
BUF
The trace entry and trace buffer for the buffer trace are to be output.
(Tracename: DCM.BCAM.BUF).
BCAM
The trace entry and trace buffer for all BCAM traces are to be output.
(Trace name: DCM.BCAM.<..>).
TRANSPORT / TRANS
The trace entry and trace buffer for the transport traces are to be output.
(Trace name: DCM.BCAM.TRANS and DCM.BCAM.LOOPBACK).
REM
The trace entry and trace buffer for the remote transport trace are to be output.
(Trace name: DCM.BCAM.TRANS).
LOC
The trace entry and trace buffer for the local transport trace are to be output.
(Trace name: DCM.BCAM.LOC).
CONHAND / CON
The trace entry and trace buffer for the connection trace are to be output.
(Trace name: DCM.BCAM.CON).
MAP
The trace entry and trace buffer for the mapping trace are to be output.
(Trace name: DCM.BCAM.MAP).
MGMT
The trace entry and trace buffer for the management trace are to be output.
(Trace name: DCM.BCAM.MGMT).
INFO
The trace entry and trace buffer for the info service trace are to be output.
(Trace name: DCM.INFO).
SM2
The trace entry and trace buffer for the BCAM-SM2-specific trace are to be output.
(Trace name: DCM.BCAM.SM2 ).
SNMP
The trace entry and trace buffer for the BCAM-SNMP-specific trace are to be output.
(Trace name: DCM.BCAM.SNMP)
FILE
The trace entry and trace buffer for the BCAM-FILE-specific trace are to be output.
(Trace name: DCM.BCAM.FILE).
IPSEC
The trace entry and trace buffer for the BCAM-IPSec-specific trace are to be output.
(Trace name: DCM.BCAM.IPSEC).
COM-IPSEC
The trace entry and trace buffer for the IPSec-specific trace are to be output.
(Trace name: IPSEC.COM).
INTERFACE
The trace entry and the trace buffers for the INTERFACE-specific trace are to be output.
(Trace name: DCM.BCAM.INTERFACE).
LOOPBACK
The trace entry and the trace buffers for the LOOPBACK-specific trace are to be output.
(Trace name: DCM.BCAM.LOOPBACK).
EXIT
The trace entry and the trace buffers for the EXIT-specific trace are to be output.
(Trace name: DCM.BCAM.EXIT).
TSAP
The trace entry and trace buffer for the BCAM-TSAP-specific trace are to be output.
(Trace name: DCM.BCAM.TSAP).
CRYPT-COM
The trace entry and the trace buffers for the CRYPT-specific trace are to be output.
(Trace name: CRYPT.COM).
CRYPT-PORT
The trace entry and the trace buffers for the CRYPT-PORT-specific traces are to be output.
(Trace name: CRYPT-PORT.<crypt-port-name>).
ONETSTOR
The trace entry and the trace buffers for the ONETSTOR-specific trace are to be output.
(Trace name: ONETSTOR.COM).
TIAM
The trace entry and the trace buffers for the TIAM-specific trace are to be output.
(Trace name: TIAM.COM).
VTSU-B
The trace entry and the trace buffers for the VTSU-B-specific traces are to be output.
(Trace name: VTSU.B.COM).
INFO=
Specifies how the information is to be output.
*DISPLAY
The information is output on the monitor or to a SYSLST file in the ASTRID format supported to date.
*SAVING-FILE
The information is output to a file in the Saving file format. The output file contains the following name, which is formed in the same way as for the Saving files to date.
File name: S.DCTRAC.AST.<yyyhhmmss> (Julian date + time)