The UTM monitoring program records application-specific monitored data.
The following conditions have to be fulfilled:
The UTM-SM2 subsystem is started.
The UTM applications are delivering data.
BS2000 accounting is started (only for DB-specific user values).
The UTM-SM2 subsystem is started automatically.
The UTM application must be ready to deliver data to SM2.
In the KDCDEF run (operand MAX SM2=ON / OFF / NO), it is possible to influence the transfer of monitored data.
SM2=OFF (default setting)
No monitored data is delivered.
If you use the UTM administration interface with KDCAPPL and SM2=ON, the transfer of monitored data can be activated subsequently for each UTM application.SM2=ON
Data is delivered.
Additional administration is not required.SM2=NO
No data is delivered. It is not possible to start the transfer of data subsequently.
DB-specific utilization figures (UDS and SESAM only) are only supplied if the following conditions are met:
BS2000 accounting is active.
The UTM accounting record UTMA is switched on (using the BS2000 command MODIFY-ACCOUNTING-PARAMETERS SET-RECORD-TYPE=UTMA).
UTM Accounting is switched on (using the KDCAPPL statement, parameter ACC=ON).
Monitored-data acquisition is enabled in SESAM
(using the statement ACC,TP=ON,CPU).
You will find more detailed information on this topic in the openUTM manuals.