This screen displays the parameters set for the active monitoring programs. As many screens as are necessary are output. If sufficient space is available, all the parameters for one monitoring program are displayed on a single screen.
It is only possible to request output from the administration section using the SHOW-ACTIVE-PARAMETERS statement.
HOST0001 SM2 ACTIVE PARAMETER <date> <time> BCAM CONNECTION PARAMETER ------------------------- INWAIT-BUCKETS : 5, 10, 100, 1000 REACT-BUCKETS : 500, 1000, 5000, 10000 INPROC-BUCKETS : 5, 10, 100, 1000 OUTPROC-BUCKETS : 5, 10, 100, 1000 BCAM CONNECTION SET SET-NAME : DIALOG PORT1110 CONNECTION-TYPE : REMOTE REMOTE HOST-SELECTION : (LOCAL / PARTNER ) (*ANY / *ANY ) (*ANY / *ANY ) CONNECTION-SELECTION : *BY-NEA-NAME *BY-PORT-NUMBER (LOCAL / PARTNER ) ($DIALOG / *ANY ) ( 1110 / *ANY ) CHANNEL-IO PARAMETER -------------------- CHANNELS : *ALL
Monitoring information
BCAM-CONNECTION-PARAMETER
INWAIT-BUCKETS | Definition of the upper limits of up to four ranges in which the INWAIT times are listed by order of magnitude |
REACT-BUCKETS | Definition of the upper limits of up to four ranges in which the REACT times are listed by order of magnitude |
INPROC-BUCKETS | Definition of the upper limits of up to four ranges in which the INPROC times are listed by order of magnitude |
OUTPROC- BUCKETS | Definition of the upper limits of up to four ranges in which the OUTPROC times are listed by order of magnitude |
BCAM-CONNECTION-SET | |
SET-NAME | Name of the selected connection set |
CONNECTION-TYPE | Type of connected to be monitored (REMOTE, LOCAL or BOTH) |
HOST-SELECTION | Hosts between which the connections are established |
CONNECTION- SELECTION | Type of connection set (*BY-PORT-NUMBER or *BY-NEA-NAME) and the selected port numbers or application names |
CHANNEL-IO PARAMETER
CHANNELS | Channel addresses for the channels monitored |
HOST0001 SM2 ACTIVE PARAMETER <date> <time>
COSMOS PARAMETER
-----------------
TITLE : COSMOS
BUFFER-SIZE : 7
NUMBER-OF-BUFFERS : 32
ADDITIONAL-INFO : *CONFIGURATION
OUTPUT : *DISK
: :2OS6:$UID.COSMOS.PAM
TASK-SELECTION
TSN : *NONE
USER-ID : *NONE
JOB-NAME : *NONE
CATEGORY : *NONE
TYPE : SYSTEM, BATCH, DIALOG, TP
EVENT-SELECTION
EIA-INTERRUPT-CLASS : *ANY
Monitoring information
COSMOS PARAMETER
TITLE | Title of the COSMOS monitoring process |
BUFFER-SIZE | Number of 4kB pages per buffer |
NUMBER-OF-BUFFERS | Number of buffers |
ADDITIONAL-INFO | Additional data to be included |
OUTPUT | Way in which the COSMOS output files are to be written |
TASK-SELECTION | Conditions on the basis of which the tasks are to be monitored |
TSN | Selection by TSN |
USER-ID | Selection by user ID |
JOB-NAME | Selection by job name |
CATEGORY | Selection by category |
TYPE | Selection by task type |
EVENT-SELECTION | Conditions on the basis of which the events are selected |
EIA-INTERRUPT-CLASS | Selection of EIA events on the basis of the interrupt code |
HOST0001 SM2 ACTIVE PARAMETER <date> <time>
EIA-SVC-NUMBER : *ANY
IO-DEVICE : *ANY
DAB-CACHE-ID : *ANY
MEMORY-CLASS : *ANY
SLOT-MEMORY-CLASS : *ANY
PEND-CODES : *ANY
LOCK-ID : *ANY
TLT-DESCRIPTOR : *ANY
TSKI-SWITCH : *ANY
TSVC-SVC-NUMBER : *ANY
CPU-NUMBER : *ANY
UNLOAD : AT-MEASUREMENT-PROGRAM-STOP
MEASUREMENT-TIME : *NOT-SPECIFIED
OPENED EVENT : INIT, STAT, PTSK, CREA, DEST, MMRC, LGON, ACF, BOUR,
CHTM, CMS, DABA, DABC, DABE, DABF, DABI, DABS, EIA2,
BLS, EIA3, SVC, FITC, IDLE, INTR, IONQ, PAGE, PAM,
PCCC, PCTC, PEND, PMIO, PRGS, PRGT, RELM, REQM, SDV,
TSKI, TSVC, WSCT
Monitoring information
EIA-SVC-NUMBER | Selection of EIA events on the basis of the SVC number |
IO-DEVICE | Selection of PMIO, SDV, CHTM and IONQ events on the basis of the mnemonic device name |
DAB-CACHE-ID | Selection of DAB events on the basis of the device VSN |
MEMORY-CLASS | Selection of the REQM and RELM event on the basis of the memory class |
SLOT-MEMORY-CLASS | Selection of the SLOT event on the basis of the memory class |
PEND-CODES | Selection of the PEND event on the basis of the pend code |
LOCK-ID | Selection of the LOCK event on the basis of the lock ID |
TLT-DESCRIPTOR | Selection of the TLT event on the basis of the TLT descriptor |
TSKI-SWITCH | Selection of the TSKI event |
TSVC-SVC-NUMBER | Selection of the TSVC events on the basis of the SVC numbers |
CPU-NUMBER | Selection of the events on the basis of the CPU numbers |
UNLOAD | Time at which the COSMOS subsystem is to be unloaded |
MEASUREMENT-TIME | Timing of the monitoring process |
OPENED EVENT | Events opened for recording |
HOST0001 SM2 ACTIVE PARAMETER <date> <time>
DISK-FILE PARAMETER
-------------------
DEVICES : B3A2, B3A3, B3A4, B3A5, B3A6, B3A7, B3A8, B3A9
FILE PARAMETER
--------------
FILENAME : :2OSH:$TSOS.TSOSCAT
:2SO6:$TSOS.TSOSCAT
:2OS7:$TSOS.TSOSCAT
Monitoring information
DISK-FILE-PARAMETER
DEVICES | Mnemonic device names of the monitored disk devices |
FILE PARAMETER
FILENAME | Name of the file whose access values are monitored |
HOST0001 SM2 ACTIVE PARAMETER <date> <time> ISAM PARAMETER -------------- POOL-NAME (SCOPE) : :2OSH:SRPMPOOL(TA=RP01 ) FILE-NAME : :2OS6:$UID.SM2.ISAMFILE.1 PERIODIC-TASK PARAMETER ----------------------- TSN : *NONE USER-ID : UID, TSOS JOB-NAME : *NONE
Monitoring information
ISAM PARAMETER
POOL-NAME | Name of the monitored ISAM pool with the catalog ID of the pubset to which the ISAM pool is assigned |
(SCOPE) | Defined type of the ISAM pool: *HOST or TA=tsn |
FILE-NAME | Name of the monitored ISAM files |
PERIODIC-TASK PARAMETER
TSN | TSNs of tasks whose monitored data is to be written to the SM2 output file |
USER-ID | User IDs of tasks whose monitored data is to be written to the SM2 output file |
JOB-NAME | Job names of tasks whose monitored data is to be written to the SM2 output file |
HOST0001 SM2 ACTIVE PARAMETER <date> <time> RESPONSETIME PARAMETER ---------------------- SCOPE : (BUCKET,CATEGORY) DEFINITION : 1 CONNECTION-NUMBER : 1024 RESPONSE-BUCKETS : 5, 10, 20, 50, 100 THINKTIME-BUCKETS : 50, 150, 300, 600, 1200 TRANSACT-BUCKETS : 5, 10, 20, 50, 100 WAITTIME-BUCKETS : 1, 2, 5, 10, 20 CONNECTION SET SET-NAME : *GLOBAL DIALOG SET-DEFINITION : BY-CONNECTION BY-CONNECTION CONNECTION-TYPE : REMOTE REMOTE CONNECTION : (*ALL ,*ALL ,*ALL )($DIALOG ,*ALL ,*ALL ) (APPL,PARTNER,PROC)
Monitoring information
RESPONSETIME PARAMETER
SCOPE | Indicates whether the response time data has been recorded according to buckets (BUCKET) or categories (CATEGORY) |
DEFINITION | Definition of the type of response time monitored |
CONNECTION-NUMBER | Maximum number of connections monitored |
RESPONSE-BUCKETS | Definition of the upper limits of up to five ranges in which the response times are stored by order of magnitude |
THINKTIME-BUCKETS | Definition of the upper limits of up to five ranges in which the think times are stored by order of magnitude |
TRANSACT-BUCKETS | Definition of the upper limits of up to five ranges in which the transaction times are stored by order of magnitude |
WAITTIME-BUCKETS | Definition of the upper limits of up to five ranges in which wait times in the BCAM pool are stored by order of magnitude |
CONNECTION-SET | |
SET-NAME | Name of the selected connection set |
SET-DEFINITION | Type of connection set monitored (BY or EXCEPT) |
CONNECTION-TYPE | Type of connection monitored (REMOTE, LOCAL or BOTH) |
CONNECTION | Selection of up to five connection groups |
APPL | Name of the selected application |
PARTNER | Name of the selected partner |
PROC | Name of the selected partner computer |
HOST0001 SM2 ACTIVE PARAMETER <date> <time> SAMPLING-DEVICE PARAMETER ------------------------- DEVICE SERVICETIME : *ON SERVICETIME PARAMETER --------------------- DEVICES : *NONE PUBSETS : 2OS6 SYSTEM PARAMETER ---------------- DEVICES : *DISK, *TAPE PUBSETS : *NONE
Monitoring information
SAMPLING-DEVICE PARAMETER
DEVICE SERVICETIME | Specifies the recording of the service times |
SERVICETIME PARAMETER
DEVICES | Specifies the mnemonic device names of the monitored devices |
PUBSETS | IDs of the pubsets |
SYSTEM PARAMETER
DEVICES | Mnemonic device names of the monitored devices or *NONE, *ALL, *TAPE or *DISK |
PUBSETS | IDs of the pubsets |
HOST0001 SM2 ACTIVE PARAMETER <date> <time> TASK PARAMETER -------------- TASK SELECTION : *ALL DEVICES : *NONE PUBSETS : 2OS6
Monitoring information
TASK PARAMETER
TASK SELECTION | *ALL: All tasks are monitored. Tasks whose monitored data is to be written to the SM2 output file. Selected tasks are specified under the selection criterion TSN, USER-ID, JOB-NAME, JOB-CLASS or TYPE. |
DEVICES | Mnemonic device names monitored by the task monitoring program for each task or *NONE, *ALL or *DISK |
PUBSETS | IDs of the pubsets |
MEASUREMENT NOT ACTIVE is displayed in place of the parameters.