SET-CHANNEL-IO-PARAMETERS Define CHANNEL-IO monitoring parameters

This statement is used to define the channels for the CHANNEL-IO monitoring program.

Format

SET-CHANNEL-IO-PARAMETERS                                                                                                                

CHANNELS = *ALL / list-poss(64): <x-string 1..4>

Operands

CHANNELS = *ALL
All channels are to be added to the monitoring program definition.

CHANNELS = list-poss(64): <x-string 1..4>
The channel addresses (CHANNEL-PATH-IDs) of the channels to be added to the monitoring program definition are specified. A check is carried out to establish whether these channels are defined in the configuration.

The CHANNEL-IO monitoring program is started for all channels when the SM2 subsystem is started.