This report contains monitored data from the MSCF subsystem.
Report output
The REPORT MSCF statement is used to request the output of the MSCF reports. The report can only be output if the SM2 administrator has activated the monitoring process using the statement START-MEASUREMENT-PROGRAM TYPE=*MSCF.
HOST0001 SM2 MSCF CYCLE: 60 S <date> <time>
# SERVER TASKS TASK LIMITS
+-----------+-----------+ +----------+------+ +--------------+------+
| CALLS | 83.8 /S | | ORIGINAL | 4 | | MAXIMAL | 50 |
+-----------+-----------+ +----------+------+ +--------------+------+
| SHORTAGES | 1.2 /S | | ACTUAL | 4 | | FLOW SET | 37 |
+-----------+-----------+ +----------+------+ +--------------+------+
| HOSTS | 6 | | OCCUPIED | 0 | | FLOW RESET | 25 |
+-----------+-----------+ +----------+------+ +--------------+------+
REQUEST WITH REPLY FLOW STATE
+------------+---------------+ +--------------+---------------+
| AVG TIME | 11 MS | | AVG TIME | ******** MS |
+------------+---------------+ +--------------+---------------+
| AVG WAIT | 9 MS | | # FLOWS | 0.0 /S |
+------------+---------------+ +--------------+---------------+
| # REQUESTS | 82.8 /S | | ACTUAL STATE | NO FLOW |
+------------+---------------+ +--------------+---------------+
Monitoring information
The entries have the following meanings:
CALLS | Number of send jobs per second |
SHORTAGES | Number of send jobs rejected per second due to line overload |
HOSTS | Number of hosts entered in MSCF with which the local host maintains a connection (excluding the local host) |
# SERVER TASKS | |
ORIGINAL | Number of server tasks originally requested |
ACTUAL | Number of current server tasks |
OCCUPIED | Number of current server tasks which could cause a bottleneck |
These values merely indicate the status at the end of the monitoring cycle and do not represent the mean value over the entire monitoring cycle. | |
TASK LIMITS | |
MAXIMUM | Maximum number of server tasks |
FLOW SET | Limit value for the number of occupied server tasks as of which the FLOW state is set |
FLOW RESET | Limit value for the number of occupied server tasks as of which the FLOW state is reset |
The MSCF subsystem sets its own FLOW or NO FLOW state, depending on the number of occupied server tasks. If the FLOW state is set, the maximum number of server tasks can be exceeded. For further information on server tasks and their limit values, see the “HIPLEX MSCF” manual [8]. | |
REQUEST WITH REPLY | |
AVG TIME | Average total time of REQUEST WITH REPLY jobs from the beginning of the job to the first reply, in milliseconds |
AVG WAIT | Average wait time with REQUEST WITH REPLY jobs for the first reply from the receiving host, in milliseconds |
# REQUESTS | Number of REQUEST WITH REPLY jobs per second |
FLOW STATE | |
AVG TIME | Average dwell time in the FLOW state; only the transitions from FLOW to NO FLOW are recorded |
# FLOWS | Number of changes from the FLOW state to the NO FLOW state per second |
ACTUAL STATE | Current state: FLOW or NO FLOW |
For the average times, ******** is output if no events have occurred.