Creating a new configuration file for a ROBAR-SV instance

For this purpose the ROBAR-SV Manager offers a user-friendly wizard with which you can create a new ROBAR-SV instance either completely from scratch or by modifying an existing configuration file. You are recommended to proceed as follows:

>	Start the ROBAR-SV Manager.
>	In the ROBAR-SV Instances menu select the Upload configuration file button if you wish to upload a configuration file for the new instance from your PC to the ROBAR system.
>	In the ROBAR-SV Instances menu select the Create new instance button. The wizard for creating a new instance is started.
>	In the first step choose whether you want to create a ROBAR-SV instance either completely from scratch or on the basis of an uploaded configuration file.
>	In the following steps enter the information required for the new instance. Using your information the wizard will create the interface-specific configuration file with the name of the ROBAR-SV instance.

Each additional ROBAR-SV instance requires its own interface-specific configuration file.

You can, as previously, also assign the configuration file manually:

1. As ROBAR administrator copy one of the sample configuration files of ROBAR-SV (/etc/robar/<interface>.conf.d/templates/template.txt) to a new file in the /etc/robar/<interface>.conf.d/ directory. The file name of the new file must correspond to the name of the ROBAR-SV instance (e.g. scsi_instance1).

2. Adjust the new file to the current configuration of the ROBAR-SV instance. See section "Information on adjusting the interface-specific configuration file".