SDF-A messages

SDA0001 SDA0003	’(&01)’ VERSION ’(&00)’ STARTED COMMENT DOES NOT END WITH A DOUBLE QUOTE (") Meaning The comment has to end with a double quote.
SDA0004	CHARACTER STRING ’(&00)’ DOES NOT END WITH A SINGLE QUOTE (’) Meaning The character string has to end with a single quote.
SDA0030	OPERAND NAME ’(&00)’ IS LONGER THAN 20 CHARACTERS Meaning Maximum length permitted: 20 characters.

SDA0031 SDA0033

SYNTAX ERROR IN OPERAND NAME ’(&00)’ INVALID LIST SPECIFICATION AFTER OPERAND NAME

SDA0034	OPERAND NAME BEFORE EQUALS SIGN ’=’ MISSING Meaning Specify the operand name before the equals sign.
SDA0035	OPERAND ’(&00)’ NOT PERMITTED IN PRESENT MODE Meaning The operand (&00) is not permitted in the current input mode (see attributes xxx-ALLOWED or the privileges definition in the syntax file). For more detailed information, see the BS2000 manual ’SDF’ (or ’SDF-A’).

SDA0037	’(&00)’ CANNOT BE ASSIGNED TO ANY OPERAND. REASON FOR ERROR: ’(&01)’. INPUT IGNORED
SDA0038 SDA0039	ERROR IN COMMAND FORMAT: ’(&00)’ IGNORED SEVERAL HELP TEXTS SPECIFIED FOR SAME LANGUAGE. LAST SPECIFICATION IS USED

SDA0043 SDA0044 SDA0045	LIST ELEMENT ’(&00)’ EXCEEDS MAXIMUM PERMITTED NUMBER CLOSING PARENTHESIS ’)’ IN LIST ’(&00)’ MISSING SPECIFICATION OF OPERAND VALUE ’(&00)’ IN LIST NOT PERMITTED
SDA0046	NO APPROPRIATE STRUCTURE ACTIVATED. VALUE ’(&01)’ FOR OPERAND ’(&00)’ COULD NOT BE INTERPRETED
SDA0047 SDA0048 SDA0050	CLOSING PARENTHESIS ’)’ IN STRUCTURE ’(&00)’ MISSING STRUCTURE SPECIFICATION ’(&00)’ INVALID AND NOT PERMITTED FOR VALUE ’(&01)’ ’(&00)’ CANNOT BE ASSIGNED TO ANY VALUE. INPUT IGNORED
SDA0052	MODIFICATION OF ADDRESSED OPERAND VALUE OF LIST ELEMENT NOT POSSIBLE BY SPECIFYING ’(&00)’ IN SEMANTICS ERROR DIALOG

SDA0053	VALUE ’(&00)’ NOT PERMITTED IN PRESENT MODE Meaning The value (&00) is not permitted in the current input mode (see the xxx-ALLOWED attributes or the privileges definition in the syntax file). For more detailed information, see the BS2000 manual ’SDF’ (or ’SDF-A’).
SDA0055	DELETION OF LIST ELEMENT ’(&00)’ BY ENTERING A SHORTENED LIST NOT PERMITTED Meaning It is not possible to delete a list element (&00) in semantics error dialog by entering a shortened list.

SDA0057 SDA0058 SDA0061 SDA0062	INVALID VALUE ’(&00)’ NOT CORRECTED YET OPERAND VALUE ’(&00)’ NOT PERMITTED IN CURRENT MODE OPERAND VALUE ’(&00)’ NOT IN PERMISSIBLE RANGE ’(&01)’ LENGTH OF OPERAND VALUE ’(&00)’ NOT IN PERMISSIBLE RANGE FOR DATA TYPE ’(&01)’
SDA0063	THE OPERAND VALUE ’(&00)’ IS NOT MEMBER OF THE SINGLE VALUE LIST OF THE SCOPE ’(&01)’
SDA0064	OPERAND VALUE ’(&00)’ DOES NOT MATCH DATA TYPE ’(&01)’
SDA0065	SPECIFICATION ’(&00)’ CANNOT BE ASSIGNED TO ANY OF THE VALUES ’(&01)’ (VALUES- OVERLAPPING=YES)
SDA0067	LENGTH OF OPERAND VALUE ’(&00)’ MUST BE EVEN Meaning The value X-TEXT is declared with ODD-POSSIBLE=NO in the syntax file. Therefore the value given for the VALUE operand must have an even number of characters. Response Correct the value.

SDA0071 SDA0072 SDA0073 SDA0074	NO OPERAND SPECIFIED FOR COMMAND OR STATEMENT ATTRIBUTE SPECIFIED IN FILE NAME ’(&00)’ NOT PERMITTED INVALID GENERATION OR VERSION SPECIFICATION IN FILE NAME ’(&00)’ INVALID USER IDENTIFICATION SPECIFIED IN FILE NAME ’(&00)’
SDA0075	FILE NAME ’(&00)’ INVALID Meaning The file name (&00) contains characters that are not permitted.

SDA0076 SDA0077 SDA0078	INVALID GENERATION OR VERSION SPECIFICATION IN FILE NAME SPECIFICATION OF POSITIONAL OPERANDS NOT PERMITTED AFTER OPERAND NAME WITH VALUE INVALID CATALOG IDENTIFICATION SPECIFIED IN FILE NAME ’(&00)’
SDA0079	SPECIFIED CHARACTERS IN TEXT ’(&00)’ NOT PERMITTED Meaning Invalid characters: equals sign blank semicolon parenthesis.

SDA008A	’PRODUCT-NAME’ MUST BE SPECIFIED WHEN ADDING CORRECTION-INFORMATION TO AN INSTALLATION SYNTAX FILE
SDA008B SDA008C SDA008D SDA008E	PRODUCT-NAME ’(&00)’ DIFFERS FROM REGISTERED ONE ’(&01)’ PRODUCT-VERSION ’(&00)’ DIFFERS FROM REGISTERED ONE ’(&01)’ ’SOURCE’ CORRECTIONS CAN ONLY BE REGISTERED IN COMPONENT SYNTAX FILES ’OBJECT’ CORRECTIONS CAN ONLY BE REGISTERED IN KPSD, SESD, INSD SYNTAX FILES
SDA008F	THE CORRECTION-INFORMATION CANNOT BE MODIFIED BY THE CURRENT PROGRAM VERSION Meaning The program you use now is old-fashioned. Response Please, use an up-to-date program version.

SDA0080 SDA0081	NUMBER (&00) OUTSIDE PERMITTED RANGE VALUE ’(&00)’ NOT CONTAINED IN KEYWORD LIST OF VALUE RANGE ’(&01)’
SDA0082	ABBREVIATION ’(&00)’ AMBIGUOUS WITH REGARD TO ’(&01)’ Response Use an unambiguous abbreviation.

SDA0083 SDA0084	NAME ’(&00)’ UNKNOWN ’(&00)’ EQUIVALENT TO TPR COMMAND(S) ’(&01)’. COMMAND REJECTED Meaning Possible reasons: the specified command already exists the specified command corresponds to the abbreviation of a command that already exists or commands that are already defined. (&00): the specified command (&01): the command that already exists or a list of the commands that already exist.
SDA0085	V-RECORD OF COMPONENT SYNTAX FILE IS FULL Meaning The 255 positions in the correction information table are occupied. Response Remove the unnecessary entries from this table.
SDA0086	NO MORE ENTRIES POSSIBLE IN V-RECORD OF COMPONENT SYNTAX FILE Meaning Only some of the given PM operand values are written to the component syntax file. Response Remove the unnecessary entries from this table.
SDA0087 SDA0088	KERNEL OR COMPONENT SYNTAX FILE CANNOT BE OF ’USER’ TYPE CORRECTION NUMBER ’(&00)’ NOT CONTAINED IN SYNTAX FILE Meaning The correction information is not contained in the V-record.
SDA0089	THERE ARE NO SIGNIFICANT DIGITS OR MORE THAN 10 SIGNIFICANT DIGITS HAVE BEEN FOUND Meaning Only 10 digits can be specified for the SDF data type FIXED. Moreover, at least one digit must be specified.
SDA009A	CHECK ERROR: THE (&00) ’(&01)’ DOESN’T MATCH Meaning The V_record contains a SOFTWARE-UNIT-NAME, a VERSION and a COMPONENT- VERSION specification. Those values can be used as CHECK-VALUES prior to any V_record update. (&00) identifies the specification. (&01) identifies its value.

SDA009B	THE CORRECTION-INFORMATION CANNOT BE MODIFIED: DATA ORGANIZATION NOT RECOGNIZED Meaning The v_record structure is false.
SDA009C	THE CORRECTION-INFORMATION CANNOT BE MODIFIED: THE V-RECORD IS FULL Meaning The v_record is full. Response Remove the unnecessary correction-informations.
SDA0090	OPERAND VALUE ’(&00)’ VIOLATES PERMITTED LOGICAL LENGTH FOR DATA TYPE ’(&01)’
SDA0099	MANDATORY OPERAND INVALID OR MISSING Meaning An incorrect value has been specified for an operand which is mandatory.

SDA0159	LANGUAGE ’(&00)’ NOT DEFINED IN GLOBALS OF CURRENT SYNTAX FILE HIERARCHY. LANGUAGE ’(&01)’ IS USED
SDA0300	DMS ERROR ’(&01)’ WHEN ACCESSING FILE ’(&00)’. IN SYSTEM MODE: /HELP-MSG DMS(&01) Meaning For more detailed information about the DMS error code, enter /HELP-MSG in system mode or see the BS2000 manual ’System Messages’.
SDA0301 SDA0302	ERROR DURING OUTPUT TO SYSLST INVALID VERSION OF SYNTAX FILE ’(&00)’ SELECTED

SDA0303	JVS ERROR ’(&01)’ WHEN ACCESSING JV ’(&00)’. IN SYSTEM MODE: /HELP-MSG JVS(&01) Meaning For more detailed information about the JVS error code, enter /HELP-MSG in system mode or see the manual ’JV (BS2000)’. JVS: Job Variable Service
SDA0304	DMS ERROR ’(&00)’ WHEN COPYING KERNEL SYNTAX FILE TO ’(&01)’. IN SYSTEM MODE: /HELP-MSG DMS(&00) Meaning For more detailed information about the DMS error code, enter /HELP-MSG in system mode or see the BS2000 manual ’System Messages’.
SDA0305	VERSION DOES NOT MATCH DOD-FORMAT CONVENTION. INPUT IGNORED Meaning The specified value does not follow the syntax rules.

SDA0306 SDA0307 SDA0308 SDA0316 SDA0335 SDA0350	KERNEL SYNTAX FILE MUST BE OF ’SYSTEM’ TYPE. INPUT IGNORED KERNEL SYNTAX FILE CANNOT BE UPDATED. INPUT IGNORED ERROR DURING OPEN OF (&00). THIS MAY LEAD TO SOME PROBLEMS KEYWORD ’(&00)’ IN INPUT ALREADY EXISTS OPERAND NAME ’(&00)’ ALREADY EXISTS INTERNAL ERROR:’(&00)’
SDA0372	AUTHORIZATION RANGE SPECIFIED IN USER SYNTAX FILE FOR COMMAND ’(&00)’ WIDER THAN THAT SPECIFIED IN SYSTEM AND GROUP SYNTAX FILES
SDA0373	DESCRIPTION OF SYSTEM INTERFACE FOR COMMAND ’(&00)’ MODIFIED IN SYNTAX FILE Meaning Possible reasons: - attribute of the command has been changed in the user syntax file. - the command is overruled by a command defined in the user syntax file.

SDA0376 SDA0377 SDA0378	SPECIFICATION OF POSITIONAL OPERANDS AT POSITION ’(&00)’ NOT PERMITTED NUMBER OF DATA TYPES PER OPERAND TOO LARGE STRUCTURE DEPTH GREATER THAN 5
SDA0379	IN COMMAND ’(&00)’ FOR OPERAND ’(&01)’, VALUES WHICH ARE NOT COMPATIBLE WITH FILE HIERARCHY ARE ENTERED IN USER OR GROUP SYNTAX FILE
SDA0380	ERROR WHEN STARTING ’$.SDF-A-V1’. PROGRAM TERMINATED ABNORMALLY Meaning The program $.SDF-A-V1 is started when switch 15 is set to update syntax files with V1 format which were created with SDF-A 1.0D Response Reset switch 15 or contact the system administrator.

SDA0381 SDA0382	ERROR WHEN READING A STATEMENT. PROGRAM TERMINATED ABNORMALLY ERROR WHEN READING //OPEN-SYNTAX-FILE STATEMENT. PROGRAM TERMINATED ABNORMALLY
SDA0383	FORMAT OF SYNTAX FILE HAS BEEN CHANGED Meaning The syntax file has been created using a previous version (V1.0D or earlier). Its structure is now modified and it cannot be opened anymore by those earlier versions.
SDA0384 SDA0385	NO VALUES SPECIFIED FOR OPERAND ’(&00)’. OPERAND WILL BE DELETED NO STRUCTURE OPERANDS ASSIGNED TO VALUE ’(&00)’. STRUCTURE WILL BE DELETED

SDA0386	ERROR WHEN STARTING ’$.SDF-A-V3’. PROGRAM TERMINATED ABNORMALLY Meaning The program $.SDF-A-V3 is started when the statement ’DEFINE-ENVIRONMENT *V3’ is specified, to update or create syntax files with V3 format. Response Contact the system administrator.
SDA0388	WARNING: DEFAULT VALUE OF OPERAND ’(&00)’ LIES OUTSIDE PERMISSIBLE RANGE BECAUSE OF ’(&01)’
SDA0389	OBJECT ’(&00)’ ALREADY DEFINED IN SYNTAX FILE
SDA0390	COPY DESTINATION NOT DEFINED OR ITS TYPE IS NOT COMPATIBLE Meaning Possible reasons: an //ADD or //EDIT statement is missing before the //COPY statement the type of the copy destination is not compatible with the type of the copied object.

SDA0391 SDA0392 SDA0393 SDA0395 SDA0396	INVALID SYNTAX FILE OBJECT. INPUT IGNORED INTERNAL OPERAND OR VALUE ’(&00)’ ALREADY ASSIGNED CURRENT COMMAND OR CURRENT STATEMENT NOT DEFINED CURRENT OPERAND OR VALUE NOT DEFINED SPECIFIED DATA TYPE CANNOT BE FOUND
SDA0397	SELECTED OPERAND OR VALUE NOT AVAILABLE AT CURRENT HIERARCHY LEVEL OF SYNTAX FILE
SDA0401	WARNING: STANDARD NAME ’(&00)’ OF CONTROL FILE ADDED TO ’(&01)’ Meaning To avoid inconsistency, the standard name of the control file cannot be suppressed by the syntax file.
SDA0402	WARNING: STANDARD NAME ’(&00)’ OF CONTROL FILE ADDED TO OPERAND ’(&01)’ Meaning To avoid inconsistency, the standard name of the control file cannot be suppressed by the syntax file.
SDA0403	WARNING: STANDARD NAME ’(&00)’ OF CONTROL FILE ADDED TO VALUE ’(&01)’ Meaning To avoid inconsistency, the standard name of the control file cannot be suppressed by the syntax file.

SDA0404	VALUE TYPE ’(&00)’ MUST BE SYNTACTICALLY SEPARATED FROM VALUE TYPE ’(&01)’
SDA0405	ERROR CAN LEAD TO PROBLEMS OF PRIVILEGING IF SAME HIERARCHY OF SYNTAX FILES IS ACTIVATED
SDA0406 SDA0407	VALUE ’(&00)’ DOES NOT MATCH CORRESPONDING SYNTAX TYPE BECAUSE OF ’(&01)’ CORRECTION REJECTED OR NOT POSSIBLE. STATEMENT IGNORED
SDA0408	ABBREVIATION ’(&00)’ INVALID AS AN ABBREVIATION OF MAIN VALUE ’(&01)’ Meaning Use an unambiguous abbreviation.
SDA0409	KEYWORD ’(&00)’ TOO LONG Meaning Maximum length permitted: 30 characters.
SDA0410 SDA0411	A SINGLE VALUE MUST BE SPECIFIED FOR ’KEYWORD’ DATA TYPE EXTERNAL COMMAND OR STATEMENT NAME ’(&00)’ ALREADY ASSIGNED Meaning Possible reasons: the command or the statement exists. the command or the statement is removed at user level but defined at group or system level.

SDA0412	WARNING: RESULT OPERAND LEVEL ALLOCATED TO OPERAND ’(&00)’ IN ’(&01)’ IS TOO LARGE AND WILL BE CORRECTED
SDA0413	FLAT STRUCTURE SPECIFIED FOR VALUE ’(&00)’ ALTHOUGH STRUCTURE ALLOWED WITHIN A LIST
SDA0414 SDA0415 SDA0416 SDA0417	DELETION OF COMMAND OR STATEMENT ’(&00)’ NOT PERMITTED DELETION OF OPERAND ’(&00)’ NOT PERMITTED DELETION OF VALUE ’(&00)’ NOT PERMITTED INTERNAL NAME ’(&00)’ ALREADY ASSIGNED
SDA0418	’(&00)’ OPERAND IGNORED. PROCESSING CONTINUES Meaning INPUT-FORM means that TPR commands can only be generated in INVARIANT or STANDARD input form if their interface is ISL of a version greater than 1. SOFTWARE-UNIT-NAME means that the syntax file is not concerned by this operand. VERSION means that on open update, it can only be evaluated when SOFTWARE-UNIT-NAME is specified.
SDA0419 SDA0420	’COMMAND-REST’ DATA TYPE ONLY PERMITTED AT COMMAND LEVEL WARNING: SOME OBJECTS NOT COPIED. STATEMENT PARTIALLY EXECUTED Meaning A problem has been encountered during the processing of one object. Refer to the preceding error messages.

SDA0421	VALUE SPECIFIED FOR ’COMMAND-REST’ DATA TYPE NOT PERMITTED
SDA0422	FOR A VALUE INTRODUCED BY AN OPERAND DECLARED ’LIST-POSSIBLE=NO’, LIST SPECIFICATION NOT POSSIBLE
SDA0423	OPERATION ADD-OP NOT PERMITTED AT THE MOMENT Meaning Definition *command-rest data type only permitted for last operand
SDA0424	FILE NAME WITH GENERATION OR VERSION SPECIFICATION MUST NOT BE FOLLOWED BY A STRUCTURE
SDA0425 SDA0426 SDA0427	VALID OUTPUT POSITION SPECIFICATION FOR THIS OPERAND MANDATORY SELECTED OPERAND OR VALUE DOES NOT MATCH REQUIRED TYPE OF OPERAND OR VALUE NO VALUE CAN BE SPECIFIED FOR ’DEVICE’ DATA TYPE
SDA0428	WARNING: OPERAND DECLARED ’PRESENCE=INTERNAL-ONLY’ WHICH INTRODUCES A STRUCTURE CANNOT BE DEFINED IN LIST. ’PRESENCE’ WAS RESET TO ’NORMAL’
SDA0430	VALUE ’(&00)’ VIOLATES IMPLEMENTATION BOUNDARIES Meaning Each data type has limit values which are output in guided dialog (e.g. C_string 1..1800).

SDA0431 SDA0432 SDA0433	INVALID DEFAULT VALUES. STATEMENT IGNORED TRANSFER AREA TOO SMALL. STATEMENT IGNORED OPERAND DECLARED ’PRESENCE=INTERNAL-ONLY’ MUST HAVE DEFAULT VALUE
SDA0434	IF DATA TYPE IS CHANGED TO ’INTEGER’ OR ’TIME’, REPRESENTATION ’OUT-FORM=’ IS MANDATORY
SDA0435	STRUCTURE MUST NOT FOLLOW ’TEXT’ OR ’COMMAND-REST’ DATA TYPE
SDA0436	LOWEST LIMIT GREATER THAN HIGHEST LIMIT Meaning Possible reasons: SHORTEST-LENGTH is greater than LONGEST-LENGTH (for example: 10..2 is wrong, 2..10 is correct). LOWEST-VALUE is greater than HIGHEST-VALUE (for example: (2,-2) is wrong, (-2,2) is correct).
SDA0437	OPERAND ’(&00)’ IN COMMAND ’(&01)’ HAS INVALID RESULT OPERAND NAME. CORRECTION TO VALUE ’*POS(1)’
SDA0438 SDA0439	START OF PROCESSING OF OBJECT ’(&00)’ ’OUTPUT=DROP-OPERAND’ NOT PERMITTED FOR VALUES WITH ’LIST-ALLOWED=YES’
SDA044A	WARNING: THE INTERNAL NAME OF THE COMMAND SHOULD START WITH ’(&00)’ OR ’(&01)’ Meaning (&01) = command class (specified at KPSD creation).
SDA0440	NO GLOBAL INFORMATION AVAILABLE IN CURRENT SYNTAX FILE. TASK TERMINATED ABNORMALLY
SDA0441	SPECIFICATION OF STRUCTURE FOR OPERAND ’(&00)’ AMBIGUOUS
SDA0442	RECURSIVE DEFINITION OF VALUES OR OPERANDS NOT PERMITTED Meaning When defining the value ’v2’ or the operand ’op2’ in the structure ’op1=v1(op2=v2)’, it is not permissible to use ’ATT-INFO=YES’ to copy the value ’v1’ or the operand ’op1’. Response Use the SDF-A statement //ADD-VALUE or //ADD-OPERAND to define the value ’v2’ or the operand ’op2’.

SDA0443 SDA0444	/SEND-MESSAGE (/INTR) FOLLOWS K2 INTERRUPT : STATEMENT CANCELLED INTERNAL NAME OF APPLICATION DOMAIN ’(&00)’ FOR ’(&01)’ DOES NOT EXIST
SDA0445	WARNING: LIST SPECIFICATION FOR OPERAND ’(&00)’ DELETED BECAUSE NO CORRESPONDING VALUE PERMITTED IN LIST
SDA0446	WARNING: CURRENT SYNTAX FILE NOT CLOSED PROPERLY WHEN LAST PROCESSED Meaning After the previous processing, the program run was terminated abnormally. Check the consistency of the syntax file currently used. An update of the syntax file is possible. The error indicator will be reset after a successful program run via the END statement.
SDA0447	FILE NAME ’(&00)’ SPECIFIED IN //OPEN-SYNTAX-FILE STATEMENT ALREADY EXISTS Meaning The file name (&00) specified in the statement has already been specified.
SDA0448 SDA0449	LIST OF SINGLE VALUES NOT PERMITTED FOR ’KEYWORD’ DATA TYPE COPYING OF OBJECTS WITHIN SAME SYNTAX FILE NOT POSSIBLE. STATEMENT REJECTED Meaning In the //COPY statement, it is necessary to specify a syntax file which is different from the current syntax file. Response Specify two different file names as syntax files.

SDA0450	WARNING: INCORRECT ’LONGEST-LENGTH’ FOR FULL-FILENAME OR PARTIAL-FILENAME SPECIFIED Meaning The LONGEST-LENGTH for a full-filename is defined as follows: with CAT-ID=YES and USER-ID=YES, LONGEST-LENGTH=54 with CAT-ID=NOand USER-ID=YES, LONGEST-LENGTH=48 with CAT-ID=YES and USER-ID=NO,LONGEST-LENGTH=44 with CAT-ID=NOand USER-ID=NO,LONGEST-LENGTH=38. The LONGEST-LENGTH for a partial-filename is defined as follows: with CAT-ID=YES and USER-ID=YES, LONGEST-LENGTH=53 with CAT-ID=NOand USER-ID=YES, LONGEST-LENGTH=47 with CAT-ID=YES and USER-ID=NO,LONGEST-LENGTH=43 with CAT-ID=NOand USER-ID=NO,LONGEST-LENGTH=37. Response Automatic correction which inserts a correct value for the LONGEST-LENGTH operand.
SDA0451 SDA0452	WARNING: ALIAS NAME SUPPRESSED BECAUSE DUPLICATE OF MAIN OR STANDARD NAME MODIFICATION OF ’NON KEYWORD’ VALUE INTO ’KEYWORD’ NOT PERMITTED
SDA0453	DEFINITION OF SDF GLOBALS NOT PERMITTED Meaning Duplicates in the next fields’ names (CONTINUE, TEST, EXECUTE, ...) are not permitted.

SDA0454	OPTION ’OVERWRITE-POSSIBLE=YES’ ONLY PERMITTED FOR OPERANDS WITH DEFAULT VALUE
SDA0455 SDA0456 SDA0457 SDA0458 SDA0459 SDA0460 SDA0461	WARNING: OUTPUT AREA TOO SHORT TO CONTAIN POSSIBLE INPUTS OUTPUT AREA TOO SHORT TO CONTAIN INPUT VALUE FOR ONE OPERAND ONLY ONE VALUE WITH ’NULL ABBREVIATION’ IS PERMITTED NO CURRENT OBJECT PRESENTLY DEFINED ERROR IN //COPY STATEMENT VALUE ’(&00)’ IS DEFAULT VALUE FOR OPERAND ’(&01)’. DELETION NOT PERMITTED WARNING: THE HASHING FUNCTION IS ONLY PERMITTED FOR C-STRING VALUES
SDA0463	LONGEST-LOGICAL-LENGTH INCORRECT Meaning The longest logical length cannot be less than the minimum length or greater than the maximum length.
SDA0464	WARNING: RECOVERY OF PARTIAL-FILENAME BY FILENAME WITH WILDCARDS Meaning The datatype <partial-filename> may be suppressed because it is completely included in the datatype <filename with- wild>.
SDA0469	ITEM CURRENTLY NOT DEFINED IN REFERENCE SYNTAX FILES Meaning The input, which contains a command, a statement, an operand or a value, is not defined in the reference syntax files.

SDA0470 SDA0471	INTERNAL PROGRAM NAME ’(&00)’ DOES NOT EXIST IN CURRENT SYNTAX FILE HELP TEXT DOES NOT EXIST FOR SPECIFIED LANGUAGE
SDA0472	DEFINITION OF SYSTEM COMMAND WITH ’IMPLEMENTOR=TPR’ NOT PERMITTED IN USER SYNTAX FILE
SDA0474	//EDIT STATEMENT NOT PERMITTED FOR THIS OBJECT Meaning This function is reserved for the system administrator.
SDA0475	//COPY STATEMENT NOT PERMITTED FOR THIS OBJECT Meaning It is not permitted to copy an old command into a user syntax file. It is not permitted to copy a common statement into a system or a group syntax file.

SDA0476	WARNING: FOR GLOBAL INFORMATION, PROGRAMS AND DOMAINS, ’ATTACHED-INFO=ONLY’ VALUE IS INTERPRETED AS ’ATTACHED-INFO=YES’
SDA0477	NO VALUE PRESENTLY DEFINED FOR PROCEDURE FILE NAME Meaning The name of the procedure that implements the command is not defined : either a file name has not been given or some IMON information has not been given yet.
SDA0478	OBJECT ’(&00)’ IS NOT FLAGGED ’REMOVED’. //RESTORE STATEMENT REJECTED Meaning Possible reasons: the specified object is not flagged REMOVED. the specified object corresponds to the abbreviation of many objects which are not flagged REMOVED.

SDA0479	THE NAME OF THE INPUT-FILE IS THE SAME AS THE NAME OF THE COMPARE-FILE
SDA0480	VALUE ’(&00)’ DOES NOT MATCH CORRESPONDING SYNTAX TYPE BECAUSE INPUT OF BLANKS IS NOT PERMITTED
SDA0481	WARNING: ’STRUCTURE-IMPLICIT=YES’ NOT PERMITTED FOR OPERAND ’(&00)’. ’STRUCTURE-IMPLICIT’ RESET TO ’NO’ Meaning STRUCTURE-IMPLICIT=YES is only possible for operands of structures which are introduced by a keyword or a keyword number.
SDA0482	WARNING: ’ANALYSE-DEFAULT’ WAS RESET TO ’NO’ FOR OPERAND ’(&00)’ Meaning - Due to previous error. - For Device Data type. - For Secret value wanted. - For default value containing a list or a structure.

SDA0483 SDA0485 SDA0486	’OVERWRITE-POSSIBLE=YES’ NOT PERMITTED FOR OPERANDS AND VALUES ’EXTERNAL-ATTRIBUTES’ VALUE ONLY VALID FOR PROGRAMS OR DOMAINS EXTERNAL DOMAIN OR PROGRAM NAME ’(&00)’ ALREADY ASSIGNED
SDA0487	//RESTORE STATEMENT IN SYSTEM SYNTAX FILE NOT POSSIBLE Meaning An object removed from the system syntax file really has been deleted; a restoration is not possible.
SDA0488	OBJECT ’(&00)’ NOT REMOVED. //RESTORE STATEMENT REJECTED Meaning The specified object is not removed. It corresponds to the abbreviation of already existing objects, which are not removed.
SDA0489	OBJECT ’(&00)’ CANNOT BE RESTORED IN USER SYNTAX FILE Meaning The object defined in the system syntax file was removed when the group syntax file was opened. Response Open the group syntax file in order to restore this object.

SDA0490	SYNTAX FILE ’(&00)’ WAS NOT CLOSED CORRECTLY IN PREVIOUS PROCESSING. FILE IS CORRUPTED AND CAN NO LONGER BE USED
SDA0491	OVERWRITING OF AN OBJECT DEFINED IN HIGHER LEVEL OF HIERARCHY NOT POSSIBLE
SDA0492	WARNING: ERROR ON ’STXIT’ INITIALISATION. /INTR COMMAND REJECTED
SDA0493	ERROR ON STXIT INITIALISATION : ABEND/K2 CAN NOT BE USED. DO NOT INTERRUPT THE PROGRAM AT THIS POINT
SDA0494 SDA0495	THE OVERWRITE OF COMMON STATEMENTS IS ONLY POSSIBLE FROM SDF-U PROGRAM THE TPR-COMMAND ’(&00)’ DOESN’T EXIST OR IS NOT A TPR-COMMAND
SDA0496	WARNING : THE RESULT-INTERNAL-NAME MAY NOT BE DEFINED WITH IMPLEMENTOR=*BY-TPR
SDA0497 SDA0499 SDA0507 SDA0508 SDA0509	NO VALUE PRESENTLY DEFINED FOR TPR COMMAND NAME WARNING: THERE IS NO OBJECT CORRESPONDING TO THE SPECIFIED INPUT FILE ’(&00)’ IS NOT A SYNTAX FILE OR FILE TYPE INVALID SYNTAX FILE ’(&00)’ NOT CLOSED CORRECTLY ’(&00)’ IS NOT A NEW KERNEL SYNTAX FILE. INPUT IGNORED
SDA0510	VERSION VALUE ’(&00)’ IGNORED BECAUSE ’(&01)’ IS NOT A COMPONENT SYNTAX FILE. PROCESSING CONTINUES Meaning The version specified in the //OPEN-SYNTAX-FILE statement has not been found. The specified file is not a component syntax file.

SDA0511	TERMINATE THE PROGRAM BY ’//END’ ELSE THE LAST OBJECT MAY BE INCOMPLETE IN THE SYNTAX FILE Meaning Return to the program to complete the last cmd/stmt processed by a CLOSE-CMD-STMT or END otherwise the file will be rejected by SDF.
SDA0512	THE PROCESSED SYNTAX FILE IS IN AN INCONSISTENT STATE Meaning The syntax file will be rejected by SDF. Open it again in update mode and try to correct the last processed objects.
SDA0571 SDA0572 SDA0573 SDA0574 SDA0575	TABLE OF COMMAND NAMES DOES NOT EXIST IN ACTIVE SYNTAX FILE TABLE OF NAMES OF APPLICATION DOMAINS DOES NOT EXIST IN ACTIVE SYNTAX FILE TABLE OF PROGRAM NAMES DOES NOT EXIST IN ACTIVE SYNTAX FILE TABLE OF ALL PRIVILEGES DOES NOT EXIST IN ACTIVE SYNTAX FILE STATEMENT FOR PROGRAM ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE
SDA0576	MCLP ERROR ’(&00)’. COMMAND NOT PROCESSED Meaning For more detailed information about the MCLP error code, see the description of the CMD macro in the BS2000 manual ’Executive Macros’. MCLP: Macro Command Language Processor.

SDA0580 SDA0581 SDA0582 SDA0583 SDA0584 SDA0585 SDA0586	NAME OF APPLICATION DOMAIN ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE GLOBAL INFORMATION DOES NOT EXIST IN ACTIVE SYNTAX FILE COMMAND ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE STATEMENT ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE V-RECORD DOES NOT EXIST IN SYNTAX FILE DATA TYPE ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE PROGRAM ’(&00)’ DOES NOT EXIST IN ACTIVE SYNTAX FILE
SDA0600	INTERNAL NUMBER ’(&00)’ ALREADY ASSIGNED TO ANOTHER PRIVILEGE Meaning Each privilege is internally identified by the positioning of the corresponding number in the 64 bits string representing the privileges. Therefore the position of the number must be different for each privilege. Response Change the internal number assigned to the privilege.
SDA0601	INCONSISTENCY IN PRIVILEGE DEFINITION Meaning In a command or statement definition, a node (operand or value) is defined with more privileges than its ’father’ nodes. The privileges for the operands and values of the lowest level cannot be further modified as one of these operands or values has no more privilege assigned to it. Response Check privileges assigned to each command node (command, operand or value) and change inconsistencies.
SDA0602	WARNING: INCONSISTENCY IN PRIVILEGE DEFINITION FOR OPERAND ’(&00)’ Meaning It must be possible to give a value to the operand for every task, whatever its privilege(s). Therefore the default value must have the same privilege(s) as the operand. If the operand has no default value, then the operand must have the same privilege(s) as its father node (command or value node), and for each privilege assigned to the operand, there must be at least one value with this privilege.
SDA0603	//REMOVE STATEMENT NOT PERMITTED FOR THIS OBJECT Meaning Removal of a privilege is only permitted in the system kernel file. This function is reserved for the privilege administrator.

SDA0605	MINIMAL-ABBREVIATION ’(&00)’ NOT ABBREVIATION OF MAIN NAME ’(&01)’ Meaning The minimal abbreviation must be an abbreviation of the main name (&01) defined with the NAME operand. Response Use an unambiguous abbreviation.
SDA0606	WARNING: NAME ’(&00)’ SHORTER THAN REQUIRED MINIMAL-ABBREVIATION ’(&01)’. INPUT IGNORED Meaning A shorter input than the minimal abbreviation can be unequivocal, but will not be executed for security reasons. Response Use an unambiguous abbreviation.
SDA0607	MINIMAL-ABBREVIATION ’(&00)’ AMBIGUOUS WITH REGARD TO AN OPERAND NAME OR VALUE Meaning The minimal abbreviation is ambiguous regarding the main, alias or standard name of another operand or value of the same level. Response Use an unambiguous abbreviation.
SDA0608	WARNING: ’NULL-ABBREVIATION’ RESET TO ’NO’ BECAUSE ’MINIMAL-ABBREVIATION’ IS GIVEN Meaning NULL-ABBREVIATION=YES cannot be used when a previous MINIMAL-ABBREVIATION has been defined.
SDA0609	WARNING: ’PRIVILEGE DEFINITION’ RESET BECAUSE PRIVILEGES ASSOCIATED WITH OBJECT TO BE COPIED DO NOT EXIST IN HIERARCHY Meaning For command or statement definition, the operands and values must have the same privilege as the command or statement node.
SDA0610	WARNING: ’PRIVILEGE DEFINITION’ RESET BECAUSE THE OBJECT TO BE COPIED IS DEFINED WITH MORE PRIVILEGES THAN ITS ’FATHER’ NODE Meaning The privilege definitions of the object and of the operands and values of the lowest level are reset to the same privilege as its ’father’ node.