AU25s require 2 height units in the rack. AU25s are set up on the same system unit as the PRIMERGY servers RX2530M<x> and use the same system board. Differences in the basic units exist to permit integration of the Application Units into the SE server and to enhance the SE server’s redundancy features.
In the event of questions, e.g. regarding application compatibility, the information for the PRIMERGY servers RX2530 M<x> also applies for the Application Units of the SE server.
Security functions in the BIOS setup and on the system board protect the data against manipulation. Information on the security functions is provided in the manual "BIOS Setup Utility for FUJITSU Server PRIMERGY RX2530 M<x>" on the Manual Server (http://manuals.ts.fujitsu.com):
> | Go to x86 Servers |
When the Service Pack 1 of the SE V6.2A is released, the AU25 M4 is also released after the AU25 M1.
Features
AU25s contain two or two Intel XEON processors, have a storage capacity of up to 1.5 TB and offer four PCI express slots.
Detailed information on the various hardware components and interfaces of the Application Units is provided in the data sheet "FUJITSU Server BS2000 SE Series". See the product site for the relevant server at http://www.fujitsu.com/uk:
> | Go to Products |