Integration of Application Unit into the SE Manager

Access to the iRMC / Management Board of Application Unit

To integrate the Application Unit into the SE Manager (status information, switching on / off, etc.), access to the iRMC / Management Board of the Application Unit is required.

When the Customer Support configures an Application Unit it sets up the fixed account semuser with the privileges "LANchannel privilege Administrator, SerialChannel Privilege user" and an initial password.

Details of how to integrate the Application Unit into the status monitoring are described in the “Operation and Administration” manual [2] and in the online help.

Access to the Application Unit

This access is required if the Application Unit is operated with the operating system VMware vSphere, Microsoft HyperV or Citrix XenServer.

The administrator provides an account on the AU and configures it and the access password in the SE Manager:

>	Hardware -> Units [<se server>(SE<model>) ->] <unit> (AU<model>) -> Management -> IP configuration, action „Change access data“ in the respective access data group.

Access to the VM Manager

This access is required if the Application Unit is operated with the Oracle operating system. The access connects to the Oracle VM Manager.

The administrator provides an account in the Oracle VM Manager and configures it and the access password in the SE Manager:

>

Applications -> User-defined applications -> Administration, action Embed user-defined management application in the group User-defined management applications. Security-relevant actions The semuser account is used by the SE Manager as fixed access and may not be deleted by the administrator. The accounts for the accesses to the AU and the Oracle VM Manager can be changed if necessary. If it is necessary to change one of the above passwords, you must make this change immediately in the SE Manager. This is the only way to ensure that the integration of the Application Unit into the SE Manager works (e.g. the status displays). Note regarding CSR: The passwords configured in the SE Manager are part of the MU global data of the CSR backup (refer to section "Configuration data backup"). The passwords are restored when the CSR backup is imported if they are no longer available.