Managing disks on Server Unit x86

Displaying disks

>	Select Devices -> [<se server> (SE<model>) ->] <unit> (SU<x86>), Disks tab.

The Disks tab displays the configured BS2000 disks.

Above the table the number of free licenses is displayed.

Only in VM2000 mode the table contains the column Assigned (see the picture): if a device assignment exists, this column displays the VM name.

The following options are available to you:

Add new BS2000 disks

>	Click Add new BS2000 disks. In the Add new BS2000 disks wizard you can specify the required properties and the desired number of BS2000 disks step by step.

Remove BS2000 disks

>	Click Remove BS2000 disks. In the Remove BS2000 disks wizard you can specify an interval of MNs for the BS2000 disks to be removed. The same prerequisites apply as for Remove disk (see below).

Update BS2000 data

>	Click the Update BS2000 data icon ( ) and confirm the action.

Remove disk

The following requirements must be satisfied:

• The disk must be out of service as a BS2000 device in order to prevent data loss (/EXPORT-PUBSET and /DETACH-DEVICE commands).

• In VM2000 mode the disk may not be assigned to a VM.

>	By the required disk, click the Remove icon and confirm the action.