Managing a Data Network Private

You manage a Data Network Private (DANPR) using the menu item Data Network Private in the IP networks menu. Up to 99 DANPRs can exist. These are named DANPR01, DANPR02, etc.

Overview of all DANPRs

>	Select Hardware -> IP networks -> Data Network Private, Overview tab. The Overview tab with all information on the existing DANPRs opens.

The administrator can create another private network by clicking the Add network button.

All existing DANPR networks are listed in the tree structure, under the Hardware -> IP networks -> Data Network Private menu entry. You can use these DANPR entries to obtain detailed information on the various private data networks and manage them.

Overview of the various DANPRs

>	Select Hardware -> IP networks -> Data Network Private -> DANPR<no>, Overview tab. The Overview tab with all information on the selected DANPR opens.

The Overview tab displays all information on the selected DANPR. The table in the NetUnit information group contains the additional Switch column with the name of the switch, if more than one logical switch exists.

The following functions are available:

Modifying the description

>	In the General information group click the Change icon () in row Description. The subsequent dialog box Change description allows to enter resp. modify the description of the network.

Activating the RADVD/DNS/NTP server

>	In the RADVD / DNS / NTP server group click the Activate RADVD / DNS / NTP server button. A dialog box opens in which you can enable the RADVD/DNS/NTP server on the local MU. The button is only active if the RADVD/DNS/NTP server on the local MU is not yet activated.

Deactivating the RADVD/DNS/NTP server

>	In the RADVD / DNS / NTP server group click the icon Deactivate RADVD / DNS / NTP server () by an IP address of the local MU. After confirmation, disables the RADVD/DNS/NTP server. The function is available only for the local MU.

Displaying the MAC address

>	In the NetUnit information group click the MAC addresses icon () by the required unit. The subsequent dialog box Display MAC addresses displays the unit's active MAC addresses.

Adding ports

>	In the NetUnit information group click Add ports, follow the instructions of the wizard, and select the required port.

Removing a port

>	In the NetUnit information group click the Delete icon by the required unit and confirm the action.