Operating a Native system

You operate a Native system via the Operation tab.

>	In the tree structure select Systems -> [<se server> (SE<model>) -> ] <unit> (AU<model>), Operation tab. The Operation tab opens (example for a VMware system).

Operation

>	In the Operation tab click Open in the Operation group. In this way you open the web interface of the iRMC for an AU PY (e.g. AU25 or AU47). In this way you open the web interface of the Management Board for an AU PQ (e.g. AU87/DBU87 or AUQ38E/DBU38E).

Booting or shutting down the system

The possible actions depend on the particular status of the system: If the system is running, the Operation tab in the Actions group displays the text Shutdown. If the system is not running, the text Boot is displayed.

>	In the Actions group click Execute to shut down or boot the system.

For AUs that are only embedded at hardware level, only the Native System is displayed, as follows:

• The SENET name is displayed as the host name (e.g. au1-se1).
• NOT_MONITORED is displayed as the status.
• There is no shutdown action available.

For more information, refer to the online help.
Please contact Customer Support for further details.