Shutting down the Server Unit or immediately powering it off
Requirement
Login as administrator, BS2000 administrator or operator The unit is powered on (Power status displays the value ON). | |
The possible actions depend on the situation and unit. If no action is possible, the tooltip shows the reason. | |
In case of an SU /390, an existing connection to the hardware interface is required. |
Procedure
> | In the Units table click the Power off icon by the desired SU: |
> | In the dialog box which then appears, select the option Shut down or Power off immediately and confirm the action with Execute. When shutting down, the BS2000 systems on the SU x86 are shut down gracefully and the system waits for termination, if configured. Only Power off immediately is available for an SU /390. In this case shut down is possible only via the BS2000 console (see section “How do I open a BS2000 console?” ) or via the action BS2000 shutdown on the Operation tab of the SE Manager. |
The Server Unit is shut down or powered off immediately.
Shutting down additional units or immediately powering them off
Additional units such as Management Units (also redundant MUs), HNCs (only for SU /390) and Application Units are powered off in the same way as the Server Unit.
Requirement
Login as administrator, BS2000 administrator (MU, HNC only), Operator (MU, HNC only) or AU administrator (AU only) The unit is powered on (Power status displays the value ON). | |
The possible actions depend on the situation and unit. If no action is possible, the tooltip shows the reason. |
Procedure
> | In the Units table click the Power off icon by the desired unit: |
> | In the dialog box which then appears, select the option Shut down or Power off immediately and confirm the action with Execute. |
For an Application Unit see also section "How do I power on/off an AU via the SE Manager?".