Application Units AU25 require one or two height units in the rack. They are set up on the same system unit as the PRIMERGY servers RX2530/RX2540 M<x>. Differences in the basic units exist to permit integration of the Application Units into the SE server and to enhance the SE server’s redundancy features.
In the event of questions, e.g. regarding application compatibility, the information for the PRIMERGY servers RX2530/RX2540 M<x> also applies for the Application Units of the SE server.
Security functions in the BIOS setup and on the system board protect the data against manipulation. Information on the security functions is available on the Fujitsu support pages (support.ts.fujitsu.com). Search there for the product PRIMERGY RX2530/RX2540 M<x>, choose an operating system and look under Downloads -> Documents and under Product Security.
The following AU25 variants are supported: AU25 M4 on the basis of PRIMERGY RX2530 M4, AU25 M5 on the basis of PRIMERGY RX2540 M5, AU25 M6 on the basis of PRIMERGY RX2540 M6 as well as AU25 M7 on the basis of PRIMERGY RX2540 M7.
Features
AU25s based on PRIMERGY RX2530 contain one or two Intel XEON processors, have a storage capacity of up to 1.5 TB and offer four PCI express slots.
AU25s based on PRIMERGY RX2540 contain one or two Intel XEON processors, have a storage capacity of up to 3 TB and offer - depending on the configuration - up to eight PCI express slots.
Detailed information on the various hardware components and interfaces of the Application Units is provided in the data sheet "Fujitsu Server BS2000 SE Series". See the product site for the relevant server at http://www.fujitsu.com/emeia:
> | Go to Products -> Servers -> BS2000 Mainframes -> Fujitsu Server BS2000 and select SE710/SE730 or SE310/SE320/SE330. |