Displaying system information and interfaces of the HNC

The Information menu provides you with information about the HNC and its interfaces.

• Displaying system information of the HNC

• Displaying IP interfaces of the HNC

• Displaying FC interfaces of the HNC

• Displaying CRD disks of the HNC

Displaying system information of the HNC

>	Select Hardware -> Units -> [<se server> (SE<model>) ->] <unit> (HNC) -> Information, System tab:

Displaying IP interfaces of the HNC

>	Select Hardware -> Units -> [<se server> (SE<model>) ->] <unit> (HNC) -> Information, IP interfaces tab:

The IP interfaces tab provides information about the HNC's LAN interfaces.

The following function is available:

Changing the packet length in the case of LOCLAN and PCI interfaces

In the case of a PCI interface you can only change the packet length in normal operation, i.e. when Status UP is displayed for the interface.

>	Click the Change icon by the required IP interface, select the required packet length in the subsequent dialog box, and confirm the action.

Displaying FC interfaces of the HNC

>	Select Hardware -> Units -> [<se server> (SE<model>) ->] <unit> (HNC) -> Information, FC interfaces tab:

The FC interfaces tab provides information on the Fibre Channel interface of the HNC to the SU /390.

The host controller used, the plug-in position (slot and port) and the local WWPN (World Wide Port Number) are displayed for each FC interface. The hardware status of the FC interface is also displayed (UP / DOWN).

Displaying CRD disks of the HNC

The CRD disks tab displays the status of the unit's internal CRD disks (configuration disks).

>	Select Hardware -> Units -> [<se server> (SE<model>) ->] <unit> (HNC) -> Information, CRD disks tab:

The structure of the tab is the same as that for the MU (see "Displaying CRD disks of the MU").