Integration of BS2000 into the SE Manager

The VM Management for SU /390 in VM2000 operation mode requires communication between the monitor system and the MU.

For SU /390 as well as for SU x86, communication is required between the MU and the BS2000 systems concerned in the following cases:

• For the BS2000 Backup Monitor to communicate with the BS2000 systems on which the backup requests take place
• For the display of pending BS2000 messages in SEM
• For the display of C2H data of BS2000 systems in SEM
• For the display of BCAM networks in SEM

The communication uses the internal network MCNPR (see Figure 2 in section "Networks") and must be configured as follows:

• In the BS2000 systems mentioned a suitable BCAM configuration must be configured by means of the templates provided. See also the BCAM manual [13].

• The REWAS subsystem must be active (default).