This Quick Guide is intended for people who operate an SE server and contains short instructions for the most important scenarios when placing the SE server in service. The following requirements should be met:
Customer Support provides the customer with the SE server.
The desired BS2000 operating mode is set on each Server Unit.
A BS2000 system is configured and fully operational.
All necessary BS2000 devices are configured.
Please note the following:
The base system of the MU (M2000) as well as the iRMC of the MU have a predefined administrator account admin at the time the SE server is delivered. In both cases an initial password is preset. The initial password for the iRMC can be found on the ID card as of MU M5, otherwise you can ask for the password at the Customer Support.
Change the password immediately after you have logged in for the first time.
You may also change the validity time and the other password attributes.
You can access the password management as follows:
in SE Manager: Authorizations -> Users -> Password management
- on the iRMC S5 resp. S6: Settings -> User Management -> iRMC Local user accounts
A detailed description of the SE Manager's functionality with the usage of the base software (M2000/X2000/HNC) V6.5A is included in the “Operation and Administration” manual and in the SE Manager's online help.