(LD) PROGRAM LOAD FRAME: DETAIL-1

             ----- PROGRAM LOAD FRAME: DETAIL-1 ----- E90L01G
-LOAD FUNCTION-                 -IPL DEVICE-
 ==>                              ==> 2
 *1 START AUTO                    *1 PRESET GROUP ------------------+
 *2 START FAST                   >*2 CURRENT GROUP --------+        |
 *3 START DIAL                    *3 UNIT ADDRESS -+       +        +
 *4 START                                          A108    A108     A108
 *5 SYSTEM DUMP                                    XXXX     XXXX
 *6 LOAD CLEAR -----+                              XXXX     XXXX
 *7 LOAD NON CLEAR -+ XXXX XXXX
                    |
                    +MT CONTROL-             --- DETAIL-2  STATUS --
 PARMS=> 1           ==> 1                     VM  MODE :  AVM/EX
                    >*1 NL                     EXA MODE :  ENABLE
                     *2 SL                     IPL EXEC :  ENABLE
                     *3 NL-REWIND
                     *4 SL-REWIND             *ENTER   EXECUTE
                                              *PF3     GO TO BASIC FRAME
                                              *PF9     GO TO DETAIL-2
           
             CL-0       CPU-0 CHP-0               RUN 
RA                                                            []-[]00

Figure 8: PROGRAM LOAD FRAME: DETAIL-1 screen

By making entries in this frame and pressing the ENTER key you can control the execution of an IPL.

Before completing this frame, check whether the correct firmware for operating Native BS2000 or VM2000 has been loaded by the SVP. Information on this is provided in the DETAIL-2 STATUS field.

DETAIL-2 STATUS	In this position the current settings of the PROGRAM LOAD FRAME: DETAIL-2 are displayed. VM MODE shows the loaded firmware:
	NATIVE	for BS2000 operation
	AVM/EX	for VM2000

If the setting is not correct, click on PF9 to correct the entry in PROGRAM LOAD FRAME: DETAIL-2. After you have made the correction and clicked on PF9, the setting is stored and you are returned to this frame (see "(LD) PROGRAM LOAD FRAME: DETAIL-2").

If the setting is correct, complete this frame and execute the IPL.

LOAD FUNCTION ==>

The following function is selected after the corresponding number has been entered:

1	START AUTO	executes IPL: automatic startup
2	START FAST	executes IPL: fast startup
3	START DIAL	executes IPL: dialog startup
4	START	not used
5	SYSTEM DUMP	executes SLED
6	LOAD CLEAR	clears main memory before IPL
7	LOAD NON CLEAR	does not clear main memory before IPL

Functions 6 or 7 must be used for an IPL from a real or emulated tape device. In addition, function 3 must be selected at MT CONTROL (see "(LD) PROGRAM LOAD FRAME: DETAIL-1").

IPL DEVICE ==>

By entering the corresponding number in this field you can specify from which device group an IPL is to be executed.

1	PRESET GROUP	The first device address in this column is the device from which an IPL is to be executed. The order and number were specified previously in (AU5) AUXILIARY FRAME: LOAD PRESET-1. If IPL is terminated normally, the device address list is transferred from the PRESET GROUP to the CURRENT GROUP. If the IPL is unsuccessful, the next device address from the PRESET GROUP is reloaded. If this loading is terminated normally, this device address heads the CURRENT GROUP.
2	CURRENT GROUP	The first device address in this column is the device from which the last IPL was executed. If the loading from this device is unsuccessful, the IPL is repeated with the next device address. If it is terminated normally, this address then heads the CURRENT GROUP.
3	UNIT ADDRESS	A new device address from which the operating system is to be loaded can be entered here. If the IPL is terminated normally, this device address is put in the first position in the CURRENT GROUP. If the IPL is unsuccessful, the loading is not repeated.

PARMS =>

A maximum of 8 characters can be entered in this field. Their position and meaning are listed below:

Position 1	'BLANK' 1	loading BS2000 loading VM2000
Position 2 - 5	mn	The mnemonic pair of an SKP console can be entered here if the standard consoles with the mnemonic pairs C2C3 and C4C5 are not available for the IPL.
Position 6 - 8		not used

MT CONTROL ==>

IPL from tape:

1	NL	from current tape position
2	SL	skip label then load
3	NL-REWIND	rewind then load
4	SL-REWIND	rewind, skip label then load

Function 3 must be selected for an IPL of a real or emulated tape device.

Frame-specific function

ENTER

Executes  IPL / SYSTEM DUMP

After making your entries in the mask and pressing the ENTER key, the following prompt will appear:

***********************************
*                                 *
* ARE YOU SURE ? (ENTER Y OR N) N *
*                                 *
***********************************

CAUTION!

The IPL must not be executed during system operation! If this instruction is not heeded, BS2000 will be aborted!

>	Press the Y and ENTER keys to execute the IPL, or N and ENTER to cancel the procedure.

RETURN

Swap to PROGRAM LOAD FRAME: BASIC (see "(LD) PROGRAM LOAD FRAME: BASIC")

PF9

Swap to PROGRAM LOAD FRAME: DETAIL-2 (see next page).