Selecting IORSF

The steps described below are required to load a specific IORSF the next time IMPL takes place or the next time the system is switched on.

IORSF with Level 2 is selected in the example below.

Requirement

You are logged in to the SE Manager and have opened the SVP console.

A BS2000 operator account has access to the SVP console if its individual right permits SVP access.

The MODE SELECTION FRAME is displayed on the screen:

                     ----- MODE SELECTION FRAME -----        E90L01G
 FUNCTION=>
 - EXECUTION -              - SELECTION -               CPU SELECT=>
                                                        - 0 1 2 3 4      - 
 *1 CPU STOP               *LD PROGRAM LOAD             -                -
                           *ST STATUS DISPLAY
 *2 INTERRUPT              *MA MANUAL OPERATION         STOP/START MODE=>
                           *AD ALTER/DISPLAY
 *3 TOD ENABLE             *ME MESSAGE                   *1 ALL CPU
                           *CH CH/SUBCH STATUS           >2 TARGET CPU
 *4 SYSTEM RESET           *AU AUXILIARY
                           *MF MSF
 *5 SYSTEM RESET CLEAR     *PA PERFORMANCE ANALYZER
 *6 STORE STATUS
 *7 RESTART
 


             CL-0           CPU-0 CHP-0             RUN
RA                                                           []-[]00

Figure 25: MODE SELECTION FRAME screen

Invoke the AUXILIARY FRAME: MENU screen

>	Enter AU in the FUNCTION=> field and then press the ENTER key, or
>	enter the FR AU command in line 24 and press the ENTER key. The AUXILIARY FRAME: MENU screen is displayed:  Figure 26: AUXILIARY FRAME: MENU screen

Invoking IORSF Control Frame

>	Enter 2 in the SELECTION=> field. Press the ENTER key. If the frame code AU2 is entered in the MODE SELECTION FRAME or the FR AU2 command is entered in line 24, the following frame is displayed immediately. The AUXILIARY FRAME: IORSF CONTROL screen is displayed: Figure 27: AUXILIARY FRAME: IORSF CONTROL screen The first four IORSFs are displayed in the upper portion of the screen. You can scroll to the next four IORSFs with the Page down key, and back with the Page up key. In this example the IORSF with the number 0 is active. Display: CURRENT NO. = 0 Now you want to activate the IORSF with the number 2:
>	Enter 1 in the FUNCTION=> field. Press the ENTER key.
>	For our example enter 2 in the NEXT POWER ON RESET NO. field and press the ENTER key.