The SE servers SE x86 comply with the relevant safety regulations for IT equipment, including electrical office equipment.
In an emergency all the hardware components must immediately be disconnected by cutting off the power distribution units from the power source (e.g. when the housing or power cable is damaged or liquid or foreign material gets into the equipment).
CAUTION!
Operation of the SE server SE x86 is then terminated ungracefully and abruptly.
Notify Customer Support.
If despite the emergency there is still time enough, you can also switch off Server Unit(s), Application Unit(s) and Management Unit manually via the operating panel at the front of the unit (for the MU see figure 9/11, and for the SU and AU see the "Server Unit x86" [3] and "Additive Components" Operating Manuals [4]). Optional hardware components have their own On/Off switches or are switched on/off automatically together with the Server Unit.
CAUTION!
These do not disconnect the hardware components completely from the power source. To cut the entire system off from the power source, you must must disconnect the power distribution units from the power source.
Notify Customer Support.