SHC-OSD is configured for operation with StorMan primarily using the settings in the SHC-OSD parameter file (after SHC-OSD has been installed, see section "Configuration of SHC-OSD"). Enter the configured StorMan server(s) in the SHC-OSD parameter file. The parameters required for this are STORMAN-HOST and STORMAN-SSL. You define the connection to StorMan servers.
On SE servers SHC-OSD can automatically ascertain and connect the StorMan server on the Management Unit (MU). The STORMAN-HOST parameter contains the values *MU1 and *MU2 for this purpose. When these values are specified, SHC-OSD automatically connects the StorMan server installed on the relevant MU. *MU1 is the first available MU, if applicaple *MU2 the second available MU. These are the MUs of the own SU and if applicaple other known SUs.
Of course, the IP addresses of the MUs can be specified directly.